Bambu Lab PLA vs eSUN PLA Basic: Which One Should You Buy?
Bambu Lab PLA Matte and eSUN PLA Basic compared on finish, accuracy, speed, compatibility and packaging, using what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Bambu Lab PLA Matte 3D Printer Filament 1.75mm9.6/10View on Amazon - 2
eSUN PLA Basic Filament 1.75mm9.6/10View on Amazon - 3
eSUN PLA Basic Filament 1.75mm 3D Printer Filament9.6/10View on Amazon - 4
Bambu Lab PLA Matte 3D Printer Filament 1.75mm9.5/10View on Amazon
A spool of PLA is the starting point for most printed parts, from signs and brackets to prototypes and gifts, and the choice usually comes down to how the filament behaves on the printer and what the spool brings with it. This comparison puts bambu lab pla vs esun pla basic side by side: Bambu Lab PLA Matte on one side and eSUN PLA Basic on the other, using what each listing states about finish, accuracy, speed, compatibility and packaging.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: pick Bambu Lab PLA Matte Charcoal for a matte finish with stated diameter accuracy and RFID for AMS. Pick eSUN PLA Basic for fast-printing claims, broad printer compatibility and vacuum-sealed packaging. The Ash Grey Bambu listing states the least, so buy it for the color and spool format rather than for stated features.
Machines on the list

Bambu Lab PLA Matte 3D Printer Filament 1.75mm
A matte PLA filament in Charcoal with RFID, AMS compatibility, stated diameter accuracy and a reusable spool.
Pros
- Matte, non-glossy finish with a smooth, soft texture
- 1.75 mm +/- 0.03 mm diameter accuracy stated
- RFID embeds print parameters for AMS, no manual setup steps
- Reusable spool; the listing states 20% less plastic waste
Cons
- No warranty term is stated
- No print speed figure is stated
- No nozzle temperature is stated
- Charcoal only; other colors are separate listings

eSUN PLA Basic Filament 1.75mm
A fast-printing PLA Basic spool in Light Blue, listed for high speed printers and most FDM machines.
Pros
- Listed for fast printing with better fluidity
- Compatible with most FDM printers, including Bambu Lab P1P, P1S, X1, X1C, A1 and A1 mini
- No bubbles, less stringing, no warping, low shrinkage
- Vacuum sealed with a desiccant bag
Cons
- No diameter accuracy figure is stated
- No RFID or AMS mention is stated
- No warranty term is stated
- Light Blue only; other colors are separate listings

eSUN PLA Basic Filament 1.75mm 3D Printer Filament
A 2 kg pack of PLA Basic in Green, two 1 kg spools, listed for fast printing.
Pros
- Two 1 kg spools in one pack
- Listed for fast printing with better fluidity
- Compatible with most FDM printers, including Bambu Lab P1P, P1S, X1, X1C, A1 and A1 mini
- Vacuum sealed with a desiccant bag
Cons
- No diameter accuracy figure is stated
- No RFID or AMS mention is stated
- No warranty term is stated
- Green only in this pack; other colors are separate listings

Bambu Lab PLA Matte 3D Printer Filament 1.75mm
A matte PLA filament in Ash Grey with RFID, 1.75 mm diameter and a 1 kg spool.
Pros
- Matte PLA, 1.75 mm, 1 kg with spool
- RFID stated in the title
- Ash Grey color option
- Same 1 kg spool format as the Charcoal listing
Cons
- Listing gives no feature bullets beyond the title
- No diameter accuracy figure is stated
- No print speed figure is stated
- No warranty term is stated
Other machines to compare
eSUN PLA Basic Filament 1.75mmCheck price on Amazon
eSUN PLA Basic Filament 1.75mm 3D Printer Filament 1KG OrangeCheck price on Amazon
eSUN PLA Basic Filament 1.75mm 3D Printer Filament 2KG ColdCheck price on Amazon
eSUN PLA Basic Filament 1.75mm 3D Printer Filament 1KG GreenCheck price on Amazon
eSUN PLA Basic Filament 1.75mm Fire Engine RedCheck price on Amazon
eSUN PLA Basic Filament 1.75mm BrownCheck price on Amazon
Side by side
| Spec | Bambu PLA Matte Ash Grey | Bambu PLA Matte Charcoal | eSUN PLA Basic Light Blue | eSUN PLA Basic 2KG Green |
|---|---|---|---|---|
| HQ Score | 52 | 60 | 59 | 58 |
| Filament | PLA Matte, 1.75 mm | PLA Matte, 1.75 mm | PLA Basic, 1.75 mm | PLA Basic, 1.75 mm |
| Spool | 1 kg with spool | 1 kg with spool | 1 kg spool | 2 kg, 2-spool pack |
| Diameter accuracy | Not stated in the listing | 1.75 mm +/- 0.03 mm | Tight tolerance, no figure stated | Tight tolerance, no figure stated |
| RFID / AMS | RFID stated | RFID, AMS compatible | Not stated in the listing | Not stated in the listing |
| Finish | Matte | Matte, non-glossy | Not stated in the listing | Not stated in the listing |
| Print speed claim | Not stated in the listing | Not stated in the listing | Fast printing, high speed | Fast printing, high speed |
| Packaging | Not stated in the listing | Reusable spool | Vacuum sealed with desiccant | Vacuum sealed with desiccant |
| Weight | 2.2 lb | 2.2 lb | 2.2 lb | 4.41 lb |
| Warranty | Not stated in the listing | Not stated in the listing | Not stated in the listing | Not stated in the listing |
Size and performance figures are the brand’s ratings quoted from listings on 9 November 2026.
Bambu Lab PLA vs eSUN PLA Basic: Finish and Accuracy
The Charcoal listing states its finish plainly: a matte, non-glossy surface that minimizes glare and gives prints a smooth, soft texture. The Charcoal listing also states diameter accuracy of 1.75 mm +/- 0.03 mm and excellent layer adhesion, with smooth prints and no clogs, bubbles or tangles claimed. The Ash Grey listing states the same matte filament and diameter in its title but gives no accuracy figure and no feature bullets at all, so the finish claim rests on the product name alone there.
eSUN PLA Basic takes a different angle and states no finish at all. It claims high printing precision and good molding effect, plus a tight diameter tolerance, but gives no accuracy figure, so the two sides cannot be ranked on measured diameter from the listings. What eSUN does state is behavior: no bubbles, less stringing, no warping, low shrinkage, no deformation and no cracking.
Speed and Compatibility
Speed is where eSUN PLA Basic makes its case. Both eSUN listings describe the filament as improved for fluidity and fast printing, and both call it a choice for fast printing on high speed printers. Neither Bambu listing states a print speed, so speed is an eSUN claim with no Bambu figure to compare against.
Compatibility runs the other way in one respect and together in another. eSUN lists compatibility with most FDM printers and names Bambu Lab P1P, P1S, X1, X1C, A1 and A1 mini among them, so eSUN PLA Basic is listed for use on Bambu Lab machines. The Charcoal listing instead leans on Bambu’s own system: print parameters are embedded in RFID, read through AMS, with no manual setting steps. The Charcoal listing states that RFID and AMS link; the Ash Grey listing states RFID in its title.
Spool, Packaging and Waste
Both sides sell 1 kg spools, and eSUN adds a 2 kg pack made of two 1 kg spools for the Green filament. Bambu lists a reusable spool on the Charcoal listing and states that the reusable spool approach reduces plastic waste by 20%. eSUN ships each spool in a sealed vacuum bag with a desiccant bag, which the listing presents as the way to keep filament dry and free from dust before opening. eSUN also states the filament is made with starch raw materials derived from renewable plant resources.
Choose Bambu Lab PLA Matte if
- You want the Charcoal listing’s stated matte, non-glossy finish for display pieces.
- You print on a Bambu Lab machine with AMS and want RFID parameters read automatically.
- A stated diameter accuracy figure and a reusable spool matter to you.
Choose eSUN PLA Basic if
- You want the fast-printing claim and a filament listed for high speed printers.
- You print on several printer brands and want the broad compatibility list.
- You want vacuum-sealed packaging with a desiccant bag, or the 2 kg two-spool pack.
For more PLA comparisons, see Bambu Lab PLA vs Creality PLA and Anycubic PLA vs Elegoo PLA.
Keep filament dry and sealed between prints, and follow the printer manual for temperatures. eSUN ships vacuum sealed with a desiccant bag; Bambu lists a reusable spool on the Charcoal listing.
Project Match
- Matte display pieces and signs: Bambu Lab PLA Matte Charcoal, for the stated non-glossy finish.
- Fast batch prints and prototypes: eSUN PLA Basic, for the stated fast-printing claim.
- Large runs without reordering: eSUN PLA Basic Green, for the 2 kg two-spool pack.
- Color-matched parts in Ash Grey: Bambu Lab PLA Matte Ash Grey, for the stated color and spool format.
FAQ: lasers and CNC
Which PLA is better for a matte finish?
The Bambu Lab PLA Matte Charcoal listing states a matte, non-glossy finish with a smooth, soft texture. eSUN PLA Basic states no finish, so the Charcoal listing is the one to pick when the matte look is the point.
Does eSUN PLA Basic work on Bambu Lab printers?
Yes, according to the eSUN listing, which names Bambu Lab P1P, P1S, X1, X1C, A1 and A1 mini among the compatible printers, alongside Creality, Prusa, AnkerMake and others.
What does RFID do on Bambu Lab PLA Matte?
The listing states that all printing parameters are embedded in RFID, which AMS reads, so the printer loads the settings without manual steps. The Charcoal listing states this in full; the Ash Grey listing states RFID in its title.
How is eSUN PLA Basic packaged?
Each spool comes in a sealed vacuum bag with a desiccant bag, which the listing states keeps the filament at an optimal storage condition and free from dust or dirt before opening.
Which spool should I buy for a big print run?
The eSUN PLA Basic Green pack holds 2 kg across two 1 kg spools, so it covers more printing before a reorder. Both sides also sell 1 kg spools for smaller runs.
Related: best PLA filament for 3D printers, best bulk PLA filament, best filament dry box and the FDM 3D printers guides.




