Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

SLA 3D Printer Parts: Consumables and Replacements

SLA 3D printer parts are the consumables and replacements that keep a resin printer printing, and this guide explains what each part does and when to swap it.

SLA 3D Printer Parts: Consumables and Replacements
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1KOYOFEI 6 PCS FEP Film for Resin 3D PrinterKOYOFEI 6 PCS FEP Film for Resin 3D Printer9.7/10View on Amazon
  2. 22PCS Photon Mono 4 FEP Film for Anycubic Photon2PCS Photon Mono 4 FEP Film for Anycubic Photon9.6/10View on Amazon
  3. 3ELEGOO 5PCS PFA Film for Saturn 3/4/4 Ultra/4ELEGOO 5PCS PFA Film for Saturn 3/4/4 Ultra/49.6/10View on Amazon
  4. 42PCS FEP Release Films Replacement for Anycubic2PCS FEP Release Films Replacement for Anycubic9.6/10View on Amazon

SLA 3D printer parts are the consumables that wear out as a resin printer works, and the release film is the part that needs replacing most often. The film sits at the bottom of the resin vat, lets ultraviolet light through to harden each layer, and releases the hardened layer so the next layer can form. When the film scratches, stops releasing cleanly or lets prints fail, a fresh film fixes that. This guide explains what each part does, how to match the film size to a printer, and when to swap the film.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

KOYOFEI 6 PCS FEP Film for Resin 3D Printer

KOYOFEI 6 PCS FEP Film for Resin 3D Printer

KOYOFEI9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

6 FEP films at 260 x 200 x 0.15 mm with 95% light transmission and heat resistance from -240°C to 205°C.

Pros

  • 6 films in the pack for repeated replacements
  • 95% light transmission keeps UV exposure stable
  • Heat-resistant from -240°C to 205°C
  • Fits Mars 4, Saturn, Photon Mono 2, Mono X and more models

Cons

  • 260 x 200 mm size fits only printers that take that size
  • No warranty term is stated
  • Sized for 7.1 to 9.25 inch mono printers; larger vats need a different film
  • No frame included; the film fits the vat frame
2PCS Photon Mono 4 FEP Film for Anycubic Photon

2PCS Photon Mono 4 FEP Film for Anycubic Photon

Aladrs9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

2 pre-installed FEP films at 173 x 115.4 mm with over 95% light transmittance, rated for more than 30,000 releases.

Pros

  • Pre-installed frame fits straight onto the resin tank
  • Over 95% light transmittance for steady UV exposure
  • Supports more than 30,000 releases
  • Withstands high temperature up to 204°C

Cons

  • 173 x 115.4 mm size fits only small-format vats
  • Only 2 films in the pack, against 5 and 6 in the other packs here
  • Pre-installed frame means each change swaps the frame too
  • Does not suit Saturn or Mars printers
ELEGOO 5PCS PFA Film for Saturn 3/4/4 Ultra/4

ELEGOO 5PCS PFA Film for Saturn 3/4/4 Ultra/4

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

5 PFA films at 273 x 176 mm and 0.127 mm thick with 92% light transmittance for Saturn resin printers.

Pros

  • 5 films in the pack for repeated replacements
  • 92% UV transmittance for faster and more even resin curing
  • 0.127 mm PFA film with a smooth, wrinkle-free surface
  • Fits Saturn 2, Saturn 3, Saturn 4 and Saturn 4 Ultra

Cons

  • 92% transmittance is lower than the 95% and over 95% figures here
  • 273 x 176 mm size fits Saturn and other 10-inch LCD printers only
  • No warranty term is stated
  • 5 films in the pack, against 6 in the KOYOFEI pack
2PCS FEP Release Films Replacement for Anycubic

2PCS FEP Release Films Replacement for Anycubic

CHINDRAG9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

2 integrated FEP films at 173 x 115.4 x 0.15 mm with more than 95% transmittance and a pre-installed ring.

Pros

  • Pre-installed ring means no cutting and no disassembly
  • More than 95% transmittance for stable UV lighting
  • Works stably long term at 204°C
  • Fits Photon Mono 2K, Mono 4K, Photon Ultra and Photon D2

Cons

  • 173 x 115.4 mm size fits only the 4 Anycubic models named here
  • Not compatible with Mono 2 and Mono 4
  • 2 films in the pack, against 5 and 6 in the other packs here
  • Fitted ring means each change swaps the ring too

What SLA 3D printer parts wear out first

The release film wears out first. The film is a thin sheet at the bottom of the resin vat. Its job is to let ultraviolet light through to harden the resin, then release the hardened layer so the print can rise. The films here state 92% to over 95% transmittance.

Signs it needs replacing are scratches, resin that sticks instead of releasing, and prints that fail partway through.

FEP vs PFA: what the film material changes

The films in this guide are FEP or PFA. Both resist resin and heat and let ultraviolet light through. The ELEGOO PFA film (on Amazon) is 0.127 mm thick with 92% light transmittance. The KOYOFEI and CHINDRAG FEP films (on Amazon) are 0.15 mm thick, and the FEP makers state 95% or more than 95% light transmission, which they link to stable UV lighting. Pick by size and fit rather than by material alone. The 3D printing resin types guide explains the resins that print through these films.

How to match the film size to your printer

Check film size first, because a pre-installed film that does not match the vat cannot be fitted. The sizes in this guide are 273 x 176 mm, 260 x 200 mm and 173 x 115.4 mm. The ELEGOO film fits Saturn 2, Saturn 3, Saturn 4 and Saturn 4 Ultra, and the KOYOFEI film (on Amazon) fits Mars 4, Saturn, Photon Mono 2 and Mono X models.

Check the compatibility list before ordering. The CHINDRAG film states it does not fit Mono 2 and Mono 4, so a Mono 2 or Mono 4 owner should pick the Aladrs film (on Amazon) for a pre-installed fit. Pre-installed films arrive fitted in a ring or frame; the KOYOFEI and ELEGOO packs are film sheets for the vat frame.

The gear: release films for resin printers

The films below cover the sizes in this guide, and each film handles the release step for the printers its maker names.

When to replace the film

Replace the film when prints start failing, when resin sticks to the film, or when the surface shows scratches. The Aladrs film states support for more than 30,000 releases, so a film that stays clean lasts through many prints. Keep a spare film on hand.

FAQ: lasers and CNC

How often should I replace the FEP film?

Replace it when prints start failing, when resin sticks to the film, or when the surface shows scratches.

What size FEP film does my printer need?

Match the film to the printer model. The sizes in this guide are 273 x 176 mm, 260 x 200 mm and 173 x 115.4 mm.

What is the difference between FEP and PFA film?

Both are release films for resin printers. The PFA film here is the ELEGOO pack at 0.127 mm thick with 92% light transmittance. The FEP films here state 95% or more than 95% light transmission, and the KOYOFEI and CHINDRAG films state 0.15 mm thickness.

Can I use a FEP film on a different printer model?

Check the size against the vat and the maker’s compatibility list first. The CHINDRAG film states it does not fit Mono 2 and Mono 4, so those printers should use the Aladrs film for a pre-installed fit.

Does a pre-installed film save time?

Yes. The CHINDRAG and Aladrs films arrive fitted in a ring or frame, so there is no cutting and no ring to take apart. The KOYOFEI pack includes a tutorial on changing the film.

Related: the 3D printer hub, resin 3D printer setup, 3D printing resin types, best resin kit for beginners and 3D printer resin price guides.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.