Safety Rated Limit Switch: What It Means for CNC
A safety rated limit switch earns its name from the ratings its listing states, so this guide shows how to read those ratings and compares three switches built for CNC routers, 3D printers and laser engravers.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Weasch 3 Pack IP67 Waterproof Micro Switch9.7/10View on Amazon - 2
BAOMAIN BM-6002 Parallel Roller Plunger Limit9.6/10View on Amazon - 3
Yusheng 2PCS ME-9101 Momentary Limit Switch Travel9.2/10View on Amazon
A router that misses its home position ruins a cut, and a lid switch that never trips leaves a machine running when it should stop. A safety rated limit switch is the small part that signals the controller when an axis reaches the end of its travel, so the machine can home itself and stop before it runs past its limits. This guide explains what the rating means, how to read it in a listing, and which of the switches below fits a homing or interlock job on a CNC router or a laser engraver.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Below: what the rating means, how to read a listing, and the switches for homing and interlock jobs.

Weasch 3 Pack IP67 Waterproof Micro Switch
A 3-pack of UL Recognized IP67 micro switches with a 0.75N lever, prewired 11.8 inch leads and SPDT contacts for CNC routers, 3D printers and laser engravers.
Pros
- UL Recognized with IP67 sealing
- 0.75N lever trips with light force
- Prewired 11.8 inch leads, no soldering
- Rated 5A at 125/250VAC and 4A at 30VDC
Cons
- No warranty term is stated
- 3-pack only, no single switch listed
- Lever is straight only, no roller option
- Leads fixed at 11.8 inches

BAOMAIN BM-6002 Parallel Roller Plunger Limit
A roller plunger limit switch rated 15A at 250VAC with 1NO+1NC silver contacts, a CE mark and an M20x1.5 cable gland for position detection on CNC machinery.
Pros
- 15A at 250VAC with silver contacts
- 1NO+1NC screw terminals
- CE certified with sealed body
- Mounting kit with M20x1.5 gland included
Cons
- Title lists IP65, a bullet says IP60
- No warranty term is stated
- No cycle figure is stated
- No prewired leads, screw terminals only

Yusheng 2PCS ME-9101 Momentary Limit Switch Travel
A 2-pack of ME-9101 momentary limit switches with a flexible coil spring rod and NC-NO contacts, listed for CNC mills, laser and plasma routers.
Pros
- Flexible coil spring rod actuator
- NC-NO contacts for either wiring
- 2 switches in the pack
- Listed for CNC mills and laser routers
Cons
- No ratings or marks are stated
- No force or travel figure is stated
- No warranty term is stated
- No wiring or lead detail is stated
Safety rated limit switch: what the rating means
Safety rated is a listing description, not a safety certificate of its own. The marks and ratings a listing states are a UL Recognized component mark and the current and voltage ratings for the contacts, while an IP rating covers dust and water only and a CE mark is the maker’s own declaration of conformity, not a safety certificate. None of the switches below states a safety-circuit rating, so a switch that states its marks and ratings can be matched to a homing or position job, and a safety-critical interlock needs a switch rated for that duty, fitted as the machine manual directs; a switch that states none of them leaves the matching to guesswork.
The Weasch switch (on Amazon) below states a UL Recognized mark and an IP67 rating, with contacts rated for 5A at 125/250VAC and 4A at 30VDC. The Baomain switch (on Amazon) states a CE mark and a 15A rating at 250VAC, with Ui 380V. The YuSheng switch states no mark or rating at all.
How to read a limit switch listing
Start with the contacts. The Weasch switch is prewired with color-coded leads: black for common, blue for normally open and white for normally closed, in a 3-wire SPDT format. The Baomain switch uses screw terminals for common, normally open and normally closed, with 1NO+1NC contacts. The YuSheng switch lists NC-NO contacts and a flexible coil spring rod, with no wiring detail stated.
Then check the actuator and the force. The Weasch switch uses a stainless steel straight lever with a 0.75N operating force, and the lever withstands up to 10N vertical pressure without bending, per the listing. The Baomain switch uses a parallel roller plunger for smooth stroke actuation. The YuSheng switch uses a flexible coil spring rod, with no force figure stated.
Then check the sealing. The Weasch switch is IP67 rated, with an internal silicone rubber seal and a fully potted hot-melt wire base, and the listing states an operating range from -40°F to 185°F. The Baomain title lists IP65 while a bullet describes the body as IP60, so the listing contradicts itself on sealing and the two figures should be read as stated. The YuSheng listing states no sealing figure.
Then check the life the listing claims. The Weasch listing states over 50,000 electrical cycles and 100,000 mechanical cycles, with silver alloy contacts. The Baomain listing states silver contacts, with no cycle figure. The YuSheng listing states no cycle figure or contact material.
Safety rated limit switch: the gear for the job
These switches cover the jobs above: a prewired micro switch for homing, a roller plunger switch for position detection, and a spring rod travel switch for CNC mills, laser and plasma routers.
Match the switch voltage and current ratings to the circuit it will switch, and follow the machine manual for homing and interlock wiring.
FAQ: lasers and CNC
What does safety rated mean on a limit switch?
It is a listing description, not a safety certificate: the listing states marks and ratings such as a UL Recognized component mark and stated current and voltage ratings, while an IP rating covers dust and water only and a CE mark is the maker’s own declaration of conformity. The Weasch switch states UL Recognized and IP67, the Baomain switch states CE and a 15A rating at 250VAC, and the YuSheng switch states no mark or rating. None of these states a safety-circuit rating, so a safety-critical interlock needs a switch rated for that duty.
Can a limit switch work as a CNC homing switch?
The Weasch listing names CNC router homing systems among the jobs its switch suits, and the YuSheng listing names CNC mills among the machines its switch suits. Check the machine manual for how its homing inputs are wired before fitting a switch.
What is the difference between NO and NC contacts?
A normally open contact stays open until the switch trips, and a normally closed contact stays closed until the switch trips. The Weasch switch is prewired with blue for normally open and white for normally closed, and the Baomain switch has 1NO+1NC screw terminals, so both let the builder pick the contact the controller expects.
Does an IP67 switch suit a dusty workshop?
The Weasch switch states IP67 waterproof and dustproof, with an internal silicone rubber seal. The Baomain title lists IP65 while a bullet describes the body as IP60, so read both figures as stated.
Do these switches fit a laser engraver?
The Weasch listing names laser engravers among the machines its switch suits, and the YuSheng listing names laser and plasma routers among the machines its switch suits. The Baomain listing names CNC machinery and factory equipment instead.
Related: the best limit switch for CNC router roundup, limit switch types for CNC machines and the best emergency stop button picks.




