Bambu Lab A1 vs P2S: Accessory Listings Compared
Four accessory listings for the Bambu Lab A1 and P2S, compared on hotends, multi-color printing and exhaust filtration.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
2PK P2S Air Filter for Bambu Lab X2D,P2S External9.5/10View on Amazon - 2
3PK 0.2+0.4+0.6mm P2S Hotend Kit for Bambu Lab9.5/10View on Amazon - 3
2 Pack 0.4mm A1 Mini/A1/A2L Hotend Kit Hardened9.4/10View on Amazon - 4
Sahvaim Bamboo Lab A1/A1 Mini AMS Lite Filament9.3/10View on Amazon
A maker with a Bambu Lab printer eventually needs spare parts, and the choice between bambu lab a1 vs p2s spares starts with knowing which machine each part was made for. This comparison weighs the listings tagged for each side.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: none of these listings is a printer, so neither side wins as a machine. Among the accessory listings, the P2S side states the stronger specs: a hotend kit rated to 500–650°C with three nozzle sizes, and a HEPA 13 exhaust filter. The A1 side answers with a 350°C hotend kit and a multi-color hub for the A1 and A1 Mini.
Machines on the list

2PK P2S Air Filter for Bambu Lab X2D,P2S External
An external exhaust filter for the P2S and X2D with HEPA 13 plus activated carbon, stated to capture 99.97% of PM2.5.
Pros
- HEPA 13 plus activated carbon, stated to capture 99.97% of PM2.5
- Fits the external exhaust fan kit for the P2S and X2D
- Filters the exhaust air the fan kit moves in auto mode for PLA, PETG, TPU and PVA and in the post-print purge for ABS, ASA, PA and PC
- 2 pack; replacement every 2-4 months stated
Cons
- Needs the external exhaust fan kit; not standalone
- Replacement every 2-4 months adds running cost
- No warranty term is stated

3PK 0.2+0.4+0.6mm P2S Hotend Kit for Bambu Lab
A 3-piece hotend kit with 0.2, 0.4 and 0.6 mm hardened steel nozzles, rated to 500–650°C, for the P2S and other Bambu Lab models.
Pros
- Three nozzle sizes in one kit: 0.2, 0.4 and 0.6 mm
- Hardened steel nozzles rated to 500–650°C, for PEEK and PEI
- All-metal heat break, pre-assembled parts, no wiring or stripping
- Silicone cover carries a P2S positioning code
Cons
- Also lists A1 and A1 Mini fit, so not P2S-only
- No warranty term is stated
- Needs a check and tighten before use, plus a bed re-level
- No stated work area or print speed

2 Pack 0.4mm A1 Mini/A1/A2L Hotend Kit Hardened
A 2-pack 0.4 mm hotend kit with hardened steel nozzles rated to 350°C, listed for the A1, A1 Mini and A2L.
Pros
- Two hotends in the pack, each with a 0.4 mm hardened steel nozzle
- Rated to 350°C, for ABS, ASA, PETG, PA and PC
- Removable threaded nozzle, swappable in minutes
- Hardened steel stated to outlast brass nozzles by up to 5-10 times
Cons
- Only the 0.4 mm size; no 0.2 or 0.6 mm option
- No warranty term is stated
- Spec table part number names the A1 Mini only
- 350°C ceiling sits below the P2S kit's 500–650°C range

Sahvaim Bamboo Lab A1/A1 Mini AMS Lite Filament
A five-way filament hub for the AMS Lite on the A1 and A1 Mini, routing four PTFE pipes into one feed for multi-color printing.
Pros
- Routes four PTFE pipes into one extruder feed
- Fits the A1 and A1 Mini AMS Lite
- Package includes the five-way component and two buckles
- Installation video is offered with the listing
Cons
- Only the hub and two buckles are in the package
- No stated materials, temperatures or nozzle sizes
- No warranty term is stated
- Needs the AMS Lite; adds nothing on its own
Other machines to compare
Ultra-Clear Tube for 1.75mm filament for Bambu Lab A1/A1 miniCheck price on Amazon
Build Plate for Bambu Lab P1S P2S A1 P1P X1 X1C X2DCheck price on Amazon
Comgrow ArcticGrip Aurora Cold Build Plate for Bambu-Lab A1Check price on Amazon
COMTREE Upgraded Extruder Brass Gear for Bambu Lab A1/A1 MiniCheck price on Amazon
Bambu Lab P1S + AMSCheck price on Amazon
BIQU CryoGrip Pro Frostbite for Bambu-LabCheck price on Amazon
Side by side
| Spec | Wefuit P2S Air Filter | Wefuit P2S Hotend Kit | HzdaDeve A1 Hotend Kit | SAHVAIM AMS Lite Hub |
|---|---|---|---|---|
| HQ Score | 63 | 61 | 56 | 50 |
| Type | External exhaust filter | Hotend kit, 3 pieces | Hotend kit, 2 pack | Filament hub, five-way |
| Nozzle | Not stated | 0.2, 0.4 and 0.6 mm | 0.4 mm | Not stated |
| Temperature | Not stated | Up to 500–650°C | Up to 350°C | Not stated |
| Filtration | HEPA 13 plus activated carbon | Not stated | Not stated | Not stated |
| Compatibility | P2S and X2D exhaust fan kits | P2S, X2D, H2S, H2D, H2C and A1, A1 Mini | A1, A1 Mini and A2L | A1 and A1 Mini, AMS Lite |
| Pack | 2 pack | 3 pieces | 2 pack | Hub with two buckles |
Hotends: bambu lab a1 vs p2s nozzle kits
Both sides offer a replacement hotend kit, and both listings state nozzle sizes and temperatures, so the two can be compared directly. The A1 side HzdaDeve kit is a 2 pack with a 0.4 mm hardened steel nozzle rated to 350°C, for ABS, ASA, PETG, PA and PC. The P2S side Wefuit kit is a 3 pack with 0.2, 0.4 and 0.6 mm hardened steel nozzles rated to 500–650°C, for PEEK and PEI. The P2S kit states an all-metal heat break and pre-assembled parts, while the A1 kit states a removable threaded nozzle.
Multi-color printing on the A1 side
Only the A1 side lists a filament-routing part. The SAHVAIM hub is a five-way component for the AMS Lite on the A1 and A1 Mini: one end connects to four PTFE pipes carrying different filaments, while the other end connects to the top of the extruder, so multi-color printing can run without manual filament swaps.
Filtration on the P2S side
Only the P2S side lists a filter. The Wefuit filter fits the external exhaust fan kit for the P2S and X2D and pairs HEPA 13 with activated carbon, stated to capture 99.97% of PM2.5. The stock internal filter, the listing says, holds only activated carbon and recirculates air. The listing states replacement every 2-4 months.
Compatibility is not a clean split
The side tags describe primary fit, not exclusive fit. The Wefuit P2S hotend kit also names the A1 and A1 Mini among its fits, along with the X2D, H2S, H2D and H2C. The HzdaDeve kit names the A1, A1 Mini and A2L, the hub names the A1 and A1 Mini, and the filter names the P2S and X2D fan kits.
Safety and upkeep
No listing here states a warranty term, and none of the hotend listings states a safety certification. The filter is the exception: its HEPA 13 plus activated carbon filtration is a stated safety-relevant feature. A hotend runs at the temperatures its listing states, so keep hands clear while it is hot.
Choose the Bambu Lab A1 side if
- You print ABS, ASA, PETG, PA or PC on an A1 and want a spare 0.4 mm hotend rated to 350°C.
- You want multi-color printing on an A1 or A1 Mini through the AMS Lite hub.
- You value a removable nozzle and a 2 pack over the highest stated temperature range.
Choose the P2S side if
- You print PEEK or PEI and want nozzles rated to 500–650°C in 0.2, 0.4 and 0.6 mm.
- You run an external exhaust fan kit on a P2S or X2D and want HEPA 13 filtration.
- You print ABS, ASA, PA or PC often and want the fan kit’s post-print purge air to pass through HEPA 13 filtration.
Hotends run at the temperatures their listings state. Keep hands clear while one is hot, let it cool before handling, and ventilate the room.
Project Match
- PEEK and PEI: Wefuit P2S Hotend Kit, rated to 500–650°C.
- ABS, ASA, PETG, PA and PC on an A1: HzdaDeve A1 Hotend Kit, rated to 350°C.
- Multi-color prints on an A1 or A1 Mini: SAHVAIM AMS Lite Hub, routing four PTFE pipes into one feed.
- Long sessions with ABS, ASA, PA or PC on a P2S: Wefuit P2S Air Filter, HEPA 13 plus activated carbon filtration for the fan kit’s post-print purge.
- Not stated: a pick for a resin printer.
FAQ: lasers and CNC
Can the Wefuit P2S hotend kit fit a Bambu Lab A1?
Yes. The listing names the A1 and A1 Mini among its fits, with the P2S, X2D, H2S, H2D and H2C.
Does the HzdaDeve hotend kit fit the A1 Mini?
Yes. The title and bullets name the A1, A1 Mini and A2L.
How often should the P2S air filter be replaced?
Every 2-4 months, per the listing.
What does the AMS Lite hub do?
It routes four PTFE pipes carrying different filaments into one extruder feed on the A1 and A1 Mini.
Which side should a new owner pick, A1 or P2S?
Pick by the part you need. The P2S side states the hotter hotend and the only filter; the A1 side states the multi-color hub and a 350°C hotend kit.
Related: best nozzle for Bambu Lab P1S, 0.2 vs 0.4 mm nozzle, PTFE vs all-metal hotend and best 3D printer enclosure with exhaust fan.




