Parts of a Heat Press Explained: Platen, Pads and Controls
A heat press is a set of platens, a heating element, controls and pads that work together to press a design onto fabric.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
LGIB Silicone Heat Press Mat 15x15 Inch9.7/10View on Amazon - 2
UNIFAMILY 2pack Heat Press Mat 15x15IN9.6/10View on Amazon - 3
Sanshare Heat Press Covers 2Pcs for Top and Bottom9.6/10View on Amazon - 4
WRINGKIT 2 Pack Heat Press Mat 15"x15"9.6/10View on Amazon
Parts of a heat press are the pieces that heat, press and control a transfer: an upper platen and a lower platen, a heating element, a pressure handle, a timer with temperature controls, and the pads or covers that sit between the platen and the garment. Each part has its own job, and knowing which part does what helps you spot wear, set up a press and choose a replacement pad that fits.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

LGIB Silicone Heat Press Mat 15x15 Inch
A double-sided silicone heat press mat, rated to 572°F, for a 15 by 15 inch platen.
Pros
- Rated to 572°F, above the 500°F limit of the other silicone mats in this set
- Double-sided and washable, so either side can face the garment
- Cuts to size with scissors for smaller presses
- Non-slip grip holds fabric in place during pressing
Cons
- Only the 15 by 15 inch size is listed
- 0.31 inches thick, so it adds height under the platen
- Blue color only; no other color is listed
- 6 month warranty is shorter than the 1 year term on the Sanshare covers

UNIFAMILY 2pack Heat Press Mat 15x15IN
A 2-pack of double-sided silicone heat press pads, rated to 500°F, for 15 by 15 inch platens.
Pros
- 2-pack design gives a spare for daily use and replacement
- Double-sided non-slip texture keeps transfers aligned
- Rated to 500°F with a flame-retardant coating
- Cuts to size with regular scissors
Cons
- Weighs 1.2 lb, which adds weight to a portable kit
- 90 days manufacturer warranty runs out sooner than the other terms here
- Red color only; no other color is listed
- Thinner than the 0.31 inch mats here

Sanshare Heat Press Covers 2Pcs for Top and Bottom
A set of covers for the top and bottom platens, sized 15 by 15 inches, that replaces Teflon sheets and butcher paper.
Pros
- Covers both the top and bottom platens in one set
- Replaces Teflon sheets and butcher paper
- Non-stick surface wipes clean and releases pressed materials
- 1 year manufacturer warranty is the longest term here
Cons
- Sized for 15 by 15 inch platens only
- Covers wrap the platens and do not work as a flat tabletop mat
- One cover per platen, with no spare if a cover wears out
- Covers protect the platens only, not the garment or the work table

WRINGKIT 2 Pack Heat Press Mat 15"x15"
A 2-pack of double-sided silicone heat press pads, rated to 500°F, for 15 by 15 inch platens.
Pros
- 2-pack lets you dedicate one pad for darks and one for lights
- Double-sided with fine-textured non-slip particles for even heat
- Rated to 500°F with flame-retardant silicone
- Cuts with scissors without fraying or cracking
Cons
- No warranty term is stated
- New mats may have a mild odor and need airing out before use
- Red color only; no other color is listed
- Sized for 15 by 15 inch presses only; no smaller size is listed
Parts of a heat press at a glance
- Upper platen: the heated plate that presses the garment and the transfer.
- Lower platen: the flat base plate that holds the garment in place.
- Heating element: the part inside the upper platen that makes the heat.
- Controls: the temperature and timer settings that run each press.
- Pressure handle: the lever that closes the press and sets the pressure.
- Pads and covers: silicone pads or platen covers that protect the platens.
The upper platen and the heating element
The upper platen is the heated plate that comes down onto the garment. The heating element sits inside it and brings the plate up to the set temperature, and the plate then passes that heat into the transfer and the fabric. A platen that heats evenly matters, since a cool spot can leave part of a design under-pressed.
The lower platen and the base
The lower platen is the flat plate that holds the garment while the press closes. The base carries the frame and keeps the press steady on a table. Some presses slide the lower platen out like a drawer so you can load a shirt without reaching under the hot upper platen, while others keep it fixed under the heat. Load the garment flat, with no folds under the transfer area.
Controls: temperature and timer
The controls set the heat and the time of a press: how hot the upper platen gets and how long it stays closed. Pressure comes from the handle that closes the press. On many presses these are dials or a small digital panel on the front of the machine. The temperature guide for heat press lists settings by material. The timer counts down while the press is closed. If a transfer lifts at the edges, check pressure, time and heat, and adjust one setting at a time.
Pads and covers: the parts you replace
Pads and covers are the parts of a heat press that wear out and get replaced. A silicone pad sits on a platen to spread heat and stop the garment from sliding. The Sanshare covers wrap (on Amazon) the top and bottom platens and take the place of loose Teflon sheets or butcher paper. The gear below is sized for platens that measure 15 by 15 inches. Some pads can be cut to fit a smaller press with regular scissors.
Heat press pads and covers for these parts
The pads below spread the heat and the covers protect the platens for the pressing step, and each one is sized for a platen that measures 15 by 15 inches.
FAQ: lasers and CNC
What does the upper platen do on a heat press?
The upper platen is the heated plate that presses the garment and the transfer. The heating element inside it brings the plate to the set temperature, and the plate passes that heat into the design.
What is a heat press pad for?
A heat press pad sits on a platen to spread heat and keep the garment from sliding. The pads in the gear section above are sized for platens that measure 15 by 15 inches.
When should a heat press pad be replaced?
Replace a pad when it no longer lies flat, shows wear that affects pressing, or holds stains that could mark a garment. Check it before a pressing session and keep a spare on hand.
Can a heat press pad be used with a household iron?
Yes, one pad here lists a household iron among its uses. The Unifamily pad in the gear section above is listed for use with household irons as well as heat presses.
Do heat press covers replace Teflon sheets?
Yes, the Sanshare covers in the gear section above are made to replace Teflon sheets. The maker states that the covers protect the top and bottom platens from ink and adhesive, so there is no need for Teflon sheets or butcher paper with them.
Related: the craft machines hub, best heat press machine for small business and what is the best heat press machine. Also see the manual heat press machine guide and best heat press cover for top.




