Heat Gun Parts and What Each One Does
Heat gun parts are the nozzles and tips that shape hot air for shrink wrap, plastic welding, crafting and soldering, and this guide explains what each one does and how to pick the right fit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
PHITUODA 4Pcs Heat Gun Nozzle Kit9.6/10View on Amazon - 2
4PCS Heat Gun Nozzle Kit9.6/10View on Amazon - 3
Watris Veiyi Heat Gun Nozzles Kit9.5/10View on Amazon - 4
20mm Welding Nozzles Tips for 32mm Liester Hot Air9.5/10View on Amazon
A heat gun does its work through the nozzle at the end of the barrel, and the shape of that nozzle decides where the hot air lands. A wide, flat nozzle spreads heat across a seam, a narrow tip aims it at a joint, and a reflector wraps it around a tube. Heat gun parts are the nozzles, reflectors and tips that fit on the end of a heat gun, and each shape changes the airflow for a different job.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

PHITUODA 4Pcs Heat Gun Nozzle Kit
A 4-piece stainless steel nozzle kit that fits 35mm hot air guns, with four shapes for shrink wrap, crafting, embossing and automotive repair.
Pros
- Four nozzle shapes in one kit for different jobs
- Fits 35mm diameter hot air guns
- Stainless steel, stated as high temperature proof and rust resistant
- Designed to prevent hot air leakage for focused heat
Cons
- No warranty term is stated
- Sized for 35mm guns, so a 32mm gun needs a different kit
- A set of four, so a buyer who needs a single shape buys the whole kit
- The four shapes are not named, so matching a shape to a job takes guesswork

4PCS Heat Gun Nozzle Kit
A 4-piece stainless steel nozzle kit with a reflector, a curved nozzle and two round nozzles for plastic welding and crafting.
Pros
- Four named shapes: reflector, curved, three-layer round and five-layer round
- Stainless steel with stated corrosion resistance
- Directs airflow to focus heat where it is needed
- Easy interchangeability for replacing old or damaged nozzles
Cons
- No gun diameter is stated, so fit must be measured first
- No warranty term is stated
- No flat tip is named, so plastic sheet welding may need a different kit
- Stated uses are plastic welding and crafting, so shrink wrap is outside the stated uses

Watris Veiyi Heat Gun Nozzles Kit
A 4-piece stainless steel nozzle kit for 35mm hot air guns, with four shapes for welding, bending plastic pipes and heat shrink tubes.
Pros
- Four shapes for welding, bending pipes and heat shrink tubes
- Fits 35mm diameter hot air guns
- Stainless steel, stated as high temperature proof and durable
- Prevents hot air leaking between the nozzle and the air pipe
Cons
- The four shapes are not named, so matching a shape to a job takes guesswork
- Sized for 35mm guns, so a 32mm gun needs a different kit
- A set of four, so a buyer who needs a single shape buys the whole kit
- Uses are welding, bending pipes and heat shrink tubes, so crafting is outside the stated uses

20mm Welding Nozzles Tips for 32mm Liester Hot Air
A 3-piece stainless steel welding tip set, 20mm wide, for 32mm hot air guns, with straight, 90 degree and 20 degree tips for PP and PVC plastic sheet welding.
Pros
- Three tips in one pack: straight, 90 degree and 20 degree
- 20mm flat tips for welding PP and PVC plastic sheets
- Suits 1500-2000W 32mm hot air guns
- Stainless steel with stated resistance to rust and oxidation
Cons
- Only fits 32mm guns, so a 35mm gun needs a different kit
- Flat tips only, so round or reflector work needs another kit
- A pack of three, so a buyer who needs a single tip buys the whole set
- Stated use is plastic sheet welding, so other jobs need another kit
How heat gun parts shape the airflow
A heat gun nozzle is a short metal sleeve that slides over the end of the barrel and turns a wide stream of hot air into a shaped flow. A flat tip spreads the flow across a seam or a sheet, a round tip aims it at a small area, and a reflector nozzle bends the flow around a tube or a pipe. The kits in this guide are all stainless steel. The PHITUODA, Hordion and Watris makers state high temperature resistance, and the PHITUODA, Lyshujli and Hordion makers state rust or corrosion resistance. Nozzle kits for a hot air soldering station pair with the tools in the best soldering tool guide.
Match the nozzle to the job
Start from the job, then pick the shape. Flat welding tips suit welding PP and PVC plastic sheets, with the Lyshujli tips (on Amazon) at 20mm wide for that work. Reflector nozzles suit heat shrink tubes, since the shape wraps heat around the tube, and the Watris kit lists heat shrink tubes among its uses. The PHITUODA kit (on Amazon) lists shrink wrapping, crafting, embossing and automotive repair. For shrink tubing work, see the best heat gun for shrink tubing guide. The Hordion kit (on Amazon) lists plastic welding and intricate crafting, with a reflector, a curved nozzle and two round nozzles.
Check the fit before ordering
Fit comes down to the diameter of the heat gun barrel. The PHITUODA and Watris kits fit hot air guns with a diameter of 35mm, while the Lyshujli tips fit 32mm hot air guns rated 1500-2000W. The Hordion kit gives no gun diameter, so the maker asks buyers to check the size carefully before ordering.
Heat gun parts for the jobs above
The kits below cover the fit and the jobs above, from a 35mm nozzle set for shrink wrap and crafting to a 20mm welding tip set for plastic sheet work.
FAQ: lasers and CNC
What is a heat gun nozzle?
A heat gun nozzle is a metal part that fits on the end of a heat gun and shapes the hot air as it leaves the barrel. Flat tips spread the air, round tips aim it, and reflector nozzles wrap it around a tube.
What size nozzle fits a heat gun?
Measure the diameter of the heat gun barrel, then match it to the kit. The PHITUODA and Watris kits fit 35mm guns, and the Lyshujli tips fit 32mm guns rated 1500-2000W. The Hordion kit gives no diameter, so check the size carefully before ordering.
Can a welding nozzle be used for shrink wrap?
A flat welding tip is shaped for welding plastic sheets, so it is not the natural pick for shrink wrap. For shrink work, a reflector nozzle suits the job better, and the Watris kit lists heat shrink tubes among its uses, while the PHITUODA kit lists shrink wrapping.
How is a heat gun nozzle replaced?
The kits in this guide are made to replace the old nozzle. The PHITUODA nozzles attach and replace easily, the Watris nozzles are easy to replace, and the Hordion nozzles swap through straightforward interchangeability.
Are heat gun nozzles stainless steel?
All four kits in this guide are stainless steel. The PHITUODA, Hordion and Watris makers state high temperature resistance, and the PHITUODA, Lyshujli and Hordion makers state rust or corrosion resistance.
Related: the craft machines hub, best heat gun for shrink tubing and best heat gun for vinyl wrap.




