Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Can I Heat Press on Nylon? What Teflon Sheets Do

Makers here do not state nylon press settings: four PTFE sheets compared by size, heat rating, reuse count and warranty for heat press work.

Can I Heat Press on Nylon? What Teflon Sheets Do
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Selizo 20 Pack Teflon Sheet for Heat PressSelizo 20 Pack Teflon Sheet for Heat Press9.7/10View on Amazon
  2. 2Selizo 10 Pack PTFE Teflon Sheet for Heat PressSelizo 10 Pack PTFE Teflon Sheet for Heat Press9.6/10View on Amazon
  3. 3TransOurDream Teflon Sheets 16×20" & Teflon PaperTransOurDream Teflon Sheets 16×20" & Teflon Paper9.6/10View on Amazon
  4. 410 Pack PTFE Sheet for Heat Press10 Pack PTFE Sheet for Heat Press9.5/10View on Amazon

Can I heat press on nylon? The makers here do not state that nylon is suitable and do not give press settings for nylon, so a Teflon sheet alone does not settle the question. A Teflon sheet is a non-stick barrier between the heat plate and the fabric, and the fabric and transfer makers’ stated settings decide whether nylon can be pressed. This guide explains what the sheet does, how the sheet is handled, and which sheet size fits the press.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

No maker states press settings for nylon, so this guide gives no temperatures or times for nylon itself.

Selizo 20 Pack Teflon Sheet for Heat Press

Selizo 20 Pack Teflon Sheet for Heat Press

selizo9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20-pack of 12 by 16 inch Teflon sheets for everyday pressing, rated to 600°F and reusable over 1000 times.

Pros

  • 20 sheets in the pack, the most here, for rotation and spares
  • Rated to 600°F and reusable over 1000 times on both sides
  • Glass fiber build resists tearing and wipes clean with a damp towel
  • 2 years manufacturer warranty is stated

Cons

  • 12 by 16 inch sheets are the smallest here, so a large press plate needs more than one sheet
  • No thickness is stated, so stiffness is unknown
  • Sheets are 12 by 16 inches, so a larger design needs a larger sheet
  • No press size is named
Selizo 10 Pack PTFE Teflon Sheet for Heat Press

Selizo 10 Pack PTFE Teflon Sheet for Heat Press

selizo9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of 16 by 24 inch Teflon sheets, the largest sheet size here, rated to 600°F.

Pros

  • 16 by 24 inch sheets are the largest here
  • Rated to 600°F and reusable up to 1000 times on both sides
  • Glass fiber build resists heat and repels water
  • Trims to any shape or size for smaller presses

Cons

  • 10 sheets in the pack, fewer than the 20-pack Selizo here
  • No warranty term is stated
  • No thickness is stated, so stiffness cannot be compared with the 0.11 mm YRYM sheet
  • Size is stated as approx. 16 by 24 inches, so exact size may vary
TransOurDream Teflon Sheets 16×20" & Teflon Paper

TransOurDream Teflon Sheets 16×20" & Teflon Paper

TransOurDream9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A mix pack of 16 by 20 inch Teflon sheets and smaller Teflon paper for presses and sublimation work, rated to 600°F.

Pros

  • Mixed pack covers two sizes: 16 by 20 inch sheets and 11.7 by 16 inch paper
  • Rated to 600°F with strong heat penetration and tear resistance
  • Reusable over 200 times with proper care, wiped clean with a damp cloth
  • L-size stated for 15 by 15 inch automatic heat presses and Easy Press

Cons

  • 200 uses is the lowest reuse count stated here
  • 8 sheets total is fewer than the 10 and 20 sheet packs here
  • Only 3 sheets are 16 by 20 inches; the other 5 are paper
  • Paper sheets are smaller than the 16 by 20 inch sheets
10 Pack PTFE Sheet for Heat Press

10 Pack PTFE Sheet for Heat Press

YRYM HT9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of 16 by 12 inch PTFE sheets that trim to size for craft pressing, rated to 600°C as stated.

Pros

  • 10 sheets at 16 by 12 inches, trimmable to any size
  • Heat rating stated as 600°C by the maker
  • Extra thick 0.11 mm sheets reuse on both sides
  • Wipes clean with mild detergent and a soft sponge, then air dries

Cons

  • 16 by 12 inch sheets are smaller than the 16 by 20 and 16 by 24 inch sheets here
  • No reuse count is given
  • No warranty term is stated
  • Pack holds 10 sheets, fewer than the 20-pack Selizo

What a Teflon sheet does

A Teflon sheet is a non-stick barrier between the heat plate and the fabric. Makers state that the sheets protect heat plates and working surfaces and help keep vinyl, glue and paint residue from sticking, with heat passing through the sheet to the design. Cleaning differs by maker: some sheets wipe with a damp cloth or towel, the Selizo 20-pack maker says to let glue or paint cool before wiping, and the YRYM HT maker says to use mild detergent with a soft sponge and air dry.

How to set up the press

If the fabric and transfer makers state that nylon is suitable, trim the sheet to cover the design and lay it over the fabric between the heat plate and the nylon, following those makers’ stated settings. No nylon temperature or time is given here. Clean the sheet as its maker directs after use. If the press itself is new, the best heat press for home use guide compares four presses for shirts and crafts.

Can I heat press on nylon with any sheet size?

Match the sheet to the press. The TransOurDream L-size is stated for 15 by 15 inch automatic heat presses, with 16 by 20 inch sheets and Teflon paper whose size is given as both 8.5 by 11 inches and 11.7 by 16 inches. The Selizo 16 by 24 inch sheets are the largest sheet size here, and no press size is named for the 12 by 16 inch Selizo pack. Makers state that these sheets trim or cut to size. See the Cricut heat press size guide before buying for a small press.

Teflon sheets for heat pressing nylon

The sheet is the layer that touches the fabric, so pick one that covers the press and states a heat rating and cleaning method that fit the job. Heat ratings here are stated in different units, so the figures cannot be compared directly.

FAQ: lasers and CNC

Can I heat press on nylon with a household iron?

The makers here do not state nylon suitability for an iron or a press. TransOurDream states its M-size for household irons, while the L-size pack here is stated for 15 by 15 inch automatic heat presses.

What size Teflon sheet do I need for a 15 by 15 inch press?

The TransOurDream L-size suits 15 by 15 inch automatic heat presses, with 16 by 20 inch sheets.

How many times can I reuse a Teflon sheet?

The TransOurDream sheets (on Amazon) last over 200 times with proper care. The Selizo 20-pack states over 1000 times, and the Selizo 16 by 24 inch sheets state up to 1000 times.

Can I cut a Teflon sheet to size?

Makers state that these sheets trim or cut to size, and TransOurDream states that contaminated sections of its Teflon paper can be cut off and the rest reused.

Do Teflon sheets come with a warranty?

Only the Selizo 20-pack states a warranty term, a 2 years manufacturer warranty.

Related: the heat press and sublimation hub, best heat press for home use and best Teflon sheet for DTF. Also see our heat press maintenance. Also see our temperature guide for heat press.

More buying guides

Craft Machines ·

How Long to Press Heat Transfer Vinyl

How long to press heat transfer vinyl comes from the vinyl maker for each vinyl and fabric, and a heat press mat gives the…