Mill Tool Holder Types Explained
Mill tool holder types explained through ER32 and ER11 spring collet sets, compared on listed sizes, included nuts, steel and stated accuracy.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Yaocom 19 Pcs Er11 Spring Collet Set9.6/10View on Amazon - 2
SILIVN 26PCS ER32 Spring Collet Set for CNC9.6/10View on Amazon - 3
Yunnergo 26 Pcs ER32 Spring Collet Set 1/32"9.6/10View on Amazon - 4
Shimeyao 9 Pcs ER11 Collet Set 1/8'' + 1/4''9.5/10View on Amazon
A small shop that cuts signs, tags and fitted parts on a CNC mill soon runs into the same question at the spindle: which holder grips the tool in hand. Mill tool holder types, in the listings covered here, come down to spring collet sets in a larger inch-based family and a smaller family that mixes metric and inch sizes, and the right pick depends on the shank sizes you run, whether nuts are in the box, and whether an accuracy figure is stated.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Yaocom 19 Pcs Er11 Spring Collet Set
An ER11 spring collet set with 15 collets from 1 mm to 7 mm plus 1/4 inch and 1/8 inch sizes, and 4 ER11A clamping nuts with M14 threading.
Pros
- 15 collet sizes cover 1 mm to 7 mm plus 1/4 inch and 1/8 inch tools
- 4 ER11A clamping nuts with M14 threading are included in the set
- Stated accuracy of 0.02 mm (0.0008 inches) for milling, drilling and tapping work
- Made from 65 Mn spring steel for a secure grip, per the maker
Cons
- Metric sizes in the list stop at 7 mm, so larger shanks need another set
- The included nuts are ER11A M14 type, so the holder thread must match
- Weight is stated at 0.46 pounds for the set
- No accuracy grade tighter than 0.02 mm is listed

SILIVN 26PCS ER32 Spring Collet Set for CNC
An ER32 spring collet set with 26 inch sizes from 1/32 inch to 13/16 inch in spring steel, each collet labeled and packaged.
Pros
- 26 sizes run from 1/32 inch to 13/16 inch for a wide inch shank range
- Made of spring steel, per the maker
- Each collet is individually labeled and packaged for quick size checks
- Listed for boring, milling, drilling, tapping, engraving and CNC spindle work
Cons
- No clamping nuts are listed in the set contents
- No accuracy figure is stated for these collets
- No warranty term is stated
- The size list is inch fractions only, with no metric sizes listed

Yunnergo 26 Pcs ER32 Spring Collet Set 1/32"
An ER32 spring collet set listed at 26 pieces with inch sizes from 1/32 inch to 13/16 inch in spring steel, each collet labeled with its size.
Pros
- Inch sizes run from 1/32 inch to 13/16 inch in the 26-piece list
- Made of quality spring steel, per the maker
- Each collet is labeled with a size for quick differentiation
- Listed for CNC engraving machines, milling machine tools and workpiece fixtures
Cons
- No clamping nuts are listed in the set contents
- No accuracy figure is stated for these collets
- No warranty term is stated
- The size list is inch fractions only, with no metric sizes listed

Shimeyao 9 Pcs ER11 Collet Set 1/8'' + 1/4''
An ER11 collet set with 3 collets in 1/8 inch, 3 in 1/4 inch and 3 clamping nuts, in alloy steel with stated accuracy of 0.02 mm.
Pros
- Stated accuracy of 0.02 mm (0.0008 inches) for milling, drilling and tapping
- 3 clamping nuts are included with the 6 collets
- Each collet is individually packed in a plastic protective box and labeled
- Made from alloy steel for a secure grip, per the maker
Cons
- Only 1/8 inch and 1/4 inch sizes are included, three of each
- No metric sizes are included in this set
- The hexagonal nuts suit ER-type toolholders, so the holder type must match
- Weight is stated at 0.23 pounds, with dimensions of 3.15 x 1.97 x 1.97 inches
Mill tool holder types in these listings
All four listings here are spring collet sets. Two are ER32 sets with inch sizes from 1/32 inch to 13/16 inch. The SILIVN set is listed for boring, milling, drilling, tapping, engraving and CNC spindle work, while the Yunnergo set is listed for CNC engraving machines, milling machine tools and workpiece fixtures. Two are ER11 sets for smaller tools, covering 1 mm to 7 mm plus inch sizes, or only 1/8 inch and 1/4 inch. No other holder style appears here, so this guide compares the two families on stated sizes, materials and contents. For the wider category, see our CNC tooling hub.
How to choose between the two families
Start with the shank. Inch tools from 1/32 inch to 13/16 inch match the ER32 sets, while small metric or inch tools up to 7 mm match the ER11 sets. Next, check contents: the ER11 sets include clamping nuts, while the ER32 sets list collets only. Then check accuracy: the ER11 sets state 0.02 mm (0.0008 inches), while the ER32 sets state none. Related reading: ER32 vs ER40 collet and ER11 vs ER16 collet.
Collet sets for each holder type
Each set below handles the step of gripping a listed tool size in a matching holder before milling, drilling, tapping or engraving work begins.
FAQ: lasers and CNC
What sizes do the ER32 sets here cover?
Both ER32 sets list inch sizes from 1/32 inch to 13/16 inch. The SILIVN set lists 26 sizes in that range, and the Yunnergo set lists the same range in its 26-piece option.
What sizes do the ER11 sets here cover?
The Yaocom set covers 1 mm to 7 mm plus 1/4 inch and 1/8 inch across 15 collets. The Shimeyao set covers only 1/8 inch and 1/4 inch, with three collets in each size.
Do these sets include clamping nuts?
The ER11 sets do: Yaocom includes 4 ER11A nuts with M14 threading, and Shimeyao includes 3 clamping nuts. The ER32 sets list collets only, with no nuts in the stated contents.
What accuracy is stated for these collets?
The two ER11 sets state accuracy of 0.02 mm (0.0008 inches). The two ER32 sets state no accuracy figure, so that point is Not stated for them.
Related: the CNC tooling hub, collet vs drill chuck for CNC and ER32 vs ER40 collet.




