How to Use Mug Press Machine: A Step by Step Guide
How to use a mug press machine, from setting temperature and time to wrapping the mug, pressing it and peeling the transfer.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
VEVOR Tumbler Heat Press Machine9.6/10View on Amazon - 2
BetterSub Mug Cup Press Heating Transfer9.5/10View on Amazon - 3
Lucky Goddness Christmas Transfer Sheets,Snowman9.4/10View on Amazon
A custom mug starts as a blank and a design, and how to use mug press machine is the skill that turns them into a finished gift or a product to sell. It comes down to setting the temperature and time, wrapping the mug, pressing it, then peeling the transfer. The steps below use the gear section, with the settings each maker states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Settings differ by machine: the VEVOR press lists 32°F to 428°F and 0 to 999 seconds, while BetterSub advises 350 to 380F for most mug projects.
| # | Product | HQ Score | Buy |
|---|---|---|---|
| 1 | VEVOR Tumbler Heat Press Machine | 9.6/10 | Buy on Amazon |
| 2 | BetterSub Mug Cup Press Heating Transfer | 9.5/10 | Buy on Amazon |
| 3 | Lucky Goddness Christmas Transfer Sheets,Snowman | 9.4/10 | Buy on Amazon |

VEVOR Tumbler Heat Press Machine
An 11-30 oz tumbler heat press with a 32°F to 428°F range, 0 to 999 seconds of time control and tape and gloves in the box.
Pros
- Fits 11-30 oz cups, 2.91-3.43 in diameter and up to 10.63 in high
- Preheats in 1 minute with NTC temperature sensing
- Temperature range of 32°F to 428°F and time range of 0 to 999 seconds
- Tape and gloves included in the box
Cons
- 12.24 lb to move and store
- Warranty term is 30 days
- Fits cups up to 10.63 in high only
- Mugs, tumblers and transfer paper are not in the box

BetterSub Mug Cup Press Heating Transfer
A 110V silica gel mug press attachment for cylindrical 30oz mugs, for BetterSub mug and 5-in-1 heat press machines.
Pros
- Fits BetterSub mug press and Combo 5-in-1 machines
- Silica gel and aluminum with good heat resistance
- Heats up quickly and contacts the mug well
- Maker advises 350 to 380F for most mug projects
Cons
- Not compatible with thumb screw type mug presses
- Attachment only: needs a BetterSub press machine
- Warranty term is 30 days
- Cylindrical shape only, for 30oz mugs

Lucky Goddness Christmas Transfer Sheets,Snowman
16 sublimation transfer sheets, 4.5 by 12 inches, for light-colored polymer or polyester blanks and mugs.
Pros
- 16 sheets at 4.5 by 12 inches per pack
- Suits mugs, T-shirts, keychains, mouse pads and coasters
- No edges or seams, with bright and smooth transfers
- Transfers are flake-proof, peel-proof and wash-proof, per the maker
Cons
- Sheets only: needs a heat press machine or household iron
- Only for light-colored, polymer or polyester-based blanks
- Final color differs by material
- No warranty term is stated
Step 1: Pick the mug and the transfer
Start with a mug the press can hold. The VEVOR press fits cups of 11 to 30 oz, with a diameter of 2.91 to 3.43 in and a max height of 10.63 in, so it covers ceramic mugs, stainless steel tumblers and glass cups. The BetterSub attachment (on Amazon) is made for cylindrical 30oz mugs on a BetterSub press. For the design, the Lucky Goddness sheets (on Amazon) measure 4.5 by 12 inches and come as 16 sheets, and they suit light-colored, polymer or polyester-based blanks.
Step 2: Set the temperature and time
Set the temperature and time first. The VEVOR press offers a temperature range of 32°F to 428°F and a time range of 0 to 999 seconds, and it preheats in 1 minute with NTC temperature sensing. BetterSub advises 350 to 380F for most mug transfer projects, and advises against setting the working temperature up to 400F, since a suitable temperature protects the heating element and extends its life. Use the manual that comes with the press for its suggested temperature and time settings.
Step 3: Wrap the mug and press it
Tape the transfer to the mug so it cannot shift while it presses. The VEVOR press includes tape and gloves in the box. The BetterSub attachment uses a premium electric heating sheet that heats up quickly and stays in good contact with the cup, and its silica gel and aluminum build carries good heat resistance. Close the press and let the set time run.
Step 4: Peel the transfer and check the result
Peel the transfer and check the result. The Lucky Goddness sheets give bright transfers with no edges or seams, and the maker says the color on the finished product comes out much darker than the color on the paper. If the color looks light, check the temperature and time before the next mug.
How to use mug press machine: the gear
The steps above need a press that holds the mug, a sleeve that heats it, and paper that carries the design: the VEVOR press handles the pressing, the BetterSub attachment is the sleeve for a BetterSub press, and the Lucky Goddness sheets handle the transfer.
Common mistakes to avoid
- Setting the temperature up to 400F when 350 to 380F is enough for most mug projects.
- Pressing a mug outside 11 to 30 oz, or wider than 3.43 in, on the VEVOR press.
- Using the BetterSub attachment on a thumb screw type mug press.
- Using the transfer sheets on dark or non-polyester blanks.
- Pressing without tape to hold the transfer in place.
How to use mug press machine: the short version
- Pick a mug of 11 to 30 oz that fits the press.
- Trim a 4.5 by 12 inch transfer sheet to fit the mug.
- Set the temperature and time the press manual suggests.
- Tape the transfer to the mug and close the press.
- Peel the transfer and check the color.
FAQ: lasers and CNC
What temperature should I use for a mug press?
BetterSub advises 350 to 380F for most mug transfer projects and advises against setting the working temperature up to 400F. The VEVOR press offers a temperature range of 32°F to 428°F, so set the temperature the press manual suggests for your mug. See the temperature guide for heat press for settings by material.
How long does a mug press take?
The VEVOR press preheats in 1 minute and offers a time range of 0 to 999 seconds. The time depends on the mug and the transfer, so use the manual’s suggested setting for your press.
What size mug fits in a mug press?
The VEVOR press fits cups of 11 to 30 oz, with a diameter of 2.91 to 3.43 in and a max height of 10.63 in. The BetterSub attachment is made for cylindrical 30oz mugs. See the 11oz vs 15oz sublimation mugs guide for the common sizes.
Do I need a special printer for mug sublimation?
No. The Lucky Goddness sheets let you run sublimation projects without buying a sublimation printer, and they work with a heat press machine or a household iron. Read do you need a special printer for sublimation for the full picture.
What comes with a mug press?
The VEVOR press includes tape and gloves. The BetterSub attachment is a sleeve only, so it needs a BetterSub press machine, and the Lucky Goddness sheets are transfer paper only. See the best mugs for mug press picks for blanks to pair with them.
Related: the craft machines hub, how to use Cricut mug press with sublimation, best heat press machine for small business and parts of a heat press.




