Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Elegoo Matte Pla vs Sunlu Pla Matte: Which One Should You Buy?

4 kg matte black PLA bundles compared on finish, accuracy, print settings, spools and compatibility.

Elegoo Matte Pla vs Sunlu Pla Matte: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ELEGOO Matte PLA Filament Matte Black 4KGELEGOO Matte PLA Filament Matte Black 4KG9.6/10View on Amazon
  2. 2SUNLU Matte PLA Filament Refill 1.75mm 4KGSUNLU Matte PLA Filament Refill 1.75mm 4KG9.5/10View on Amazon

Each listing here describes a matte, low-gloss finish that hides layer lines, and the Elegoo Matte Pla vs Sunlu Pla Matte question comes down to spools. Elegoo ships ready-to-load spools, while Sunlu ships refill rolls that need a reusable spool. Pick Elegoo when you want to load filament and start printing, and pick Sunlu when you already own a matching reusable spool and want the refill format with stated print settings.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: Elegoo is the simpler buy when no reusable spool sits on the shelf, with spools included and stated diameter accuracy. Sunlu suits makers who already own a matching reusable spool, with stated print settings and a refill format that cuts plastic waste.

Machines on the list

ELEGOO Matte PLA Filament Matte Black 4KG

ELEGOO Matte PLA Filament Matte Black 4KG

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A matte black PLA bundle in 4 kg, wound on 1 kg cardboard spools, with 1.75 mm diameter and +/- 0.02 mm accuracy stated.

Pros

  • 1.75 mm diameter with +/- 0.02 mm accuracy stated
  • Matte, low-gloss finish with nearly invisible layer lines
  • 4 kg on 1 kg cardboard spools, ready to load with no spare spool needed
  • Neat winding that the maker lists as preventing tangles and feeding issues

Cons

  • No print settings stated: no nozzle, bed or speed figures
  • Enclosed printers must keep the door open when printing this filament
  • No warranty term stated
  • Only black is listed in this 4 kg bundle
SUNLU Matte PLA Filament Refill 1.75mm 4KG

SUNLU Matte PLA Filament Refill 1.75mm 4KG

SUNLU9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A matte black PLA refill in 4 kg, in 1 kg rolls without a spool, made for reusable spools and AMS setups.

Pros

  • Print settings stated: nozzle 200-230°C, bed 50-65°C, speed 50-100mm/s
  • Matte, low-gloss finish with a frosted texture that conceals layer lines
  • Fits Bambu Lab spools, Sunlu 2025 spools and AMS setups
  • Refill format with no spool, listed as cutting plastic waste

Cons

  • No spool included: you need a reusable spool before you can print
  • Not compatible with the Sunlu 2rd detachable spool, per the listing
  • No diameter accuracy figure stated
  • No warranty term stated

Other machines to compare

Side by side

Spec Elegoo Matte PLA 4KG Sunlu Matte PLA 4KG Edge
HQ Score 59 55 Elegoo
Filament Matte PLA, 1.75 mm Matte PLA refill, 1.75 mm Even
Pack 4 kg, 4 spools of 1 kg 4 kg, 4 rolls of 1 kg, no spool Elegoo
Diameter accuracy +/- 0.02 mm Not stated Elegoo
Print settings Not stated Nozzle 200-230°C, bed 50-65°C, speed 50-100mm/s Sunlu
Spool Cardboard spool included Refill only, reusable spool needed Elegoo
Compatibility Most 1.75 mm FDM printers; Neptune 3 and Neptune 4 series named Most FDM printers, AMS, AMS Lite; Bambu Lab and Sunlu 2025 spools Even
Finish Matte, low gloss, smooth; layer lines nearly invisible Matte, low gloss, smooth; frosted texture conceals layer lines Even
Enclosed printers Keep the door open when printing Not stated Even
Warranty Not stated Not stated Even

Specs are what each manufacturer publishes as its rating on the listing, collected 5 November 2026.

Filament and finish

Both bundles are matte black PLA in 1.75 mm, sold as 4 kg packs. Elegoo describes a matte, low-gloss and smooth finish with nearly invisible layer lines, and Sunlu describes a matte, low-gloss and smooth finish with a frosted texture that conceals layer lines. The finish matches on each side: a soft surface that hides layer lines. Sunlu lists a nozzle range of 200-230°C and a bed range of 50-65°C, while the Elegoo listing states no print temperatures.

Elegoo Matte Pla vs Sunlu Pla Matte: diameter and accuracy

Elegoo states 1.75 mm diameter with accuracy of +/- 0.02 mm, and says it uses advanced measurement procedures during manufacturing. Sunlu states 1.75 mm diameter and leaves accuracy unstated, so the Sunlu listing gives no figure to compare against the Elegoo accuracy claim. Diameter matches on each side; accuracy is a stated Elegoo figure only.

Sunlu recommends a nozzle temperature of 200-230°C, a bed temperature of 50-65°C, and a printing speed of 50-100mm/s. Elegoo states no nozzle, bed or speed figures, so the Elegoo listing gives no stated starting point for print settings. Stated settings give Sunlu buyers a starting point straight from the listing.

Spools and refills

Elegoo ships 4 spools of 1 kg on cardboard spools, with each spool listed at 2.2 lbs, so the bundle loads straight into a printer with no extra hardware. Sunlu ships 4 rolls of 1 kg as refill filament with no spool, made for reusable spools. The refill format cuts plastic waste, per the Sunlu listing, and the filament cannot print until it sits on a matching spool. Sunlu names its 2025 new spool and the Bambu Lab spool as matches, and warns that the refill is not compatible with the Sunlu 2rd detachable spool.

Compatibility

Elegoo lists universal compatibility with common 1.75 mm FDM printers and names the Neptune 3 series and Neptune 4 series. Sunlu lists compatibility with most FDM printers, AMS and AMS Lite, plus the Sunlu 2025 new spool, the Bambu Lab spool and other well-known brands. Elegoo adds a note for enclosed printers: keep the door open when printing Elegoo matte PLA. Sunlu states no enclosed-printer note.

Choose the Elegoo Matte PLA 4KG if

  • You want spools in the box and filament that loads straight away.
  • Stated diameter accuracy of +/- 0.02 mm matters to you.
  • You print on a Neptune 3 series or Neptune 4 series machine.

Choose the Sunlu Matte PLA 4KG if

  • You already own a Bambu Lab spool or a Sunlu 2025 spool.
  • You want stated print settings: nozzle 200-230°C, bed 50-65°C, speed 50-100mm/s.
  • You prefer a refill format that cuts plastic waste.
Safety

Keep the door open when printing Elegoo matte PLA in an enclosed printer, per the Elegoo listing. Each listing describes vacuum-sealed packaging that keeps dampness and air away from the filament.

Project Match

Project picks, based only on what each listing states:

  • Display pieces where layer lines should stay hidden: each side, since each listing describes a matte finish that conceals layer lines.
  • Prints on a Bambu Lab spool or an AMS setup: Sunlu, which names Bambu Lab spools, AMS and AMS Lite.
  • Prints on a Neptune 3 series or Neptune 4 series machine: Elegoo, which names those machines.
  • Prints where no reusable spool is on hand: Elegoo, which ships spools in the box.
  • Material and work-area notes beyond these: Not stated.

FAQ: lasers and CNC

Which matte PLA should I buy, Elegoo or Sunlu?

Buy Elegoo when you want spools included and stated accuracy of +/- 0.02 mm. Buy Sunlu when you already own a matching reusable spool and want stated print settings and a refill format. The finish is matte and low gloss on each side, so the choice turns on spools and settings.

Does the Sunlu matte PLA refill need a spool?

Yes. The Sunlu listing sells refill filament with no spool, made for reusable spools such as the Sunlu 2025 new spool and the Bambu Lab spool. Check the spool you own before buying, since the refill is not compatible with the Sunlu 2rd detachable spool.

What print settings does Sunlu list for its matte PLA?

Sunlu recommends a nozzle temperature of 200-230°C, a bed temperature of 50-65°C, and a printing speed of 50-100mm/s. The Elegoo listing states no print settings.

Can I print Elegoo matte PLA in an enclosed printer?

Yes, with the door open: the Elegoo listing says to keep the door open when printing Elegoo matte PLA in an enclosed printer. The Sunlu listing states no enclosed-printer note.

What does a matte PLA finish hide?

Layer lines. Elegoo describes nearly invisible layer lines from its matte, low-gloss finish, and Sunlu describes a frosted texture that conceals layer lines.

Related: best PLA filament for 3D printers, Overture matte PLA vs Sunlu PLA matte, Bambu Lab PLA vs Elegoo PLA Plus, best PLA filament 1 kg and best filament dry box.

More buying guides