Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Cricut Heat Press Size: Which Size to Buy for Crafts

A plain guide to Cricut heat press size: match the heated plate to the design, mind the attachments, and leave room on the bench for the swing.

Cricut Heat Press Size: Which Size to Buy for Crafts
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1KEINVE 10"x10" Heat Press MachineKEINVE 10"x10" Heat Press Machine9.6/10View on Amazon
  2. 2Calogy Mini Heat PressCalogy Mini Heat Press9.5/10View on Amazon
  3. 3Cricut EasyPress® 3-9 in x 9 inCricut EasyPress® 3-9 in x 9 in9.5/10View on Amazon

A shirt design that will not fit under the press, a mug that needs its own attachment, and a bench that suddenly feels small: that is the usual start of a Cricut heat press size question. Cricut heat press size is the size of the heated plate, and the right size is the plate that covers the design in a single press, with room to spare on the blank. This guide walks through how to match the plate to the blank, which attachments change the answer, and how much bench space a press needs.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Step 1: Measure the design, not the shirt

Start with the design itself: the widest and tallest points of the finished transfer, including any border or backing that must press flat. A shirt can take a larger design than a tote bag, and a mug takes a curved wrap rather than a flat plate, so the blank sets the limit before the press does. Measure the blank where the design will sit, then look for a plate that covers it with a margin on each side.

Step 2: Match the plate to the blank

Plates are sold by their heated area, and the flat size in the reference listing here is 12 x 15 inches, on a 5-in-1 combo press that also handles shirts, mugs, caps and plates. That size covers a full front design on many shirts, and bags and mouse pads that fit under the plate, in a single press. Smaller plates suit chest prints and children’s sizes, while a larger plate suits full backs and batch work, so match the plate to the biggest design the shop presses often. Our best 5 in 1 heat press guide compares combo presses, and Cricut EasyPress vs heat press covers the handheld alternative.

Step 3: Attachments change the size question

A flat plate is only part of the answer when the press takes attachments. The reference 5-in-1 press ships with a mug attachment for 11oz mugs, a hat attachment, and two plate attachments, so one machine covers shirts, mugs, caps and plates. A mug press wraps the curve rather than pressing flat, so its size is the mug it fits, not the plate. Before buying, list the blanks the shop will press most, then check that the press has an attachment for each one. See mug press vs heat press and hat press vs flat heat press for the two most common add-ons.

Step 4: Check the space on the bench

A press is bigger than its plate, and a swing-away press needs room to turn. The reference press measures 19.0 x 18.0 x 17.0 inches, and its heating element rotates 360 degrees so hands stay clear while placing materials, with a slide-out base for a stable working area. Leave clear space around the press for the swing and for the blank, and check the bench depth against the press footprint before ordering. A press that fits the bench but has no room to swing open is hard to load and use. See clamshell vs swing away heat press if bench space is tight.

Step 5: Heat, pads and safety

Even heat across the plate matters, and the reference press uses a double-tube heating plate with 2 layers of insulation cotton and a thick silicone pad for uniform heat. It ships with dual high-temperature silicone pads resistant up to 750 degrees Fahrenheit and a reusable Teflon sheet to protect materials and the platen. The digital controller sets time and temperature, sounds an alarm when the transfer is complete, and shuts off on overheat. Keep the pads and the Teflon sheet with the press, and replace a worn sheet before it marks a blank. Our Teflon sheet vs silicone heat press pad guide compares the two options.

Common mistakes to avoid

  • Buying by the shirt size instead of the design size.
  • Forgetting the mug and hat attachments when the shop sells drinkware and caps.
  • Measuring the plate but not the bench space the swing needs.
  • Pressing without a Teflon sheet or silicone pad and marking the blank.
  • Skipping the overheat protection and alarm when comparing presses.

Cricut Heat Press Size: The Short Version

  1. Measure the design, including any border that must press flat.
  2. Match the plate to the biggest design the shop presses often; the reference plate here is 12 x 15 inches.
  3. Check the attachments: mug, hat and plate sizes are separate from the flat plate.
  4. Check the bench space: the reference press measures 19.0 x 18.0 x 17.0 inches and swings 360 degrees.
  5. Keep the Teflon sheet and silicone pads with the press.

FAQ: lasers and CNC

What size heat press do I need for T-shirts?

A 12 x 15 inch plate covers a full front design on many shirts in a single press, and the reference 5-in-1 press here uses that size. Smaller plates suit chest prints, while larger plates suit full backs. Measure the biggest design the shop presses often, then pick a plate that covers it.

Can one heat press do mugs and hats?

Yes, if it takes attachments. The reference 5-in-1 press ships with a mug attachment for 11oz mugs, a hat attachment and two plate attachments. A mug attachment wraps the curve of the mug, so its size is the mug it fits rather than the flat plate.

How much space does a heat press need?

More than the plate: the reference press measures 19.0 x 18.0 x 17.0 inches, and its heating element rotates 360 degrees. Leave clear space around the press for the swing and for the blank, and check the bench depth against the press footprint before ordering.

What is the difference between a swing-away and a clamshell press?

A swing-away press rotates its heating element aside, as the reference press does through 360 degrees, so hands stay clear while placing materials. A clamshell press lifts straight up, which needs less bench space but keeps the hot plate above the work. The choice comes down to bench space and how the shop loads blanks. See clamshell vs swing away heat press for the full comparison.

Do I need a Teflon sheet for heat pressing?

The reference press ships with a reusable Teflon sheet and dual silicone pads resistant up to 750 degrees Fahrenheit, and the sheet protects both the materials and the platen. Keep it with the press and replace a worn sheet before it marks a blank. Our Teflon sheet vs silicone heat press pad guide compares the two options.

Related: the best 5 in 1 heat press guide, Cricut EasyPress vs heat press and best heat press vinyl transfers. Also see our best sublimation blanks. Also see our heat press vs iron.

More buying guides