Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Teflon Sheet vs Silicone Heat Press Pad: Which One Should You Buy?

A Teflon sheet shields the top platen and releases cleanly, while a thick mat sits under the garment and absorbs heat, so the right pick depends on your press size and the transfers you run.

Teflon Sheet vs Silicone Heat Press Pad: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Upgraded Heat Press 15x15 Slide Out Clamshell w/5 DTFUpgraded Heat Press 15x15 Slide Out Clamshell w/5 DTF9.7/10View on Amazon
  2. 2SmarketBuy 15x15 Inch Heat Press for T ShirtsSmarketBuy 15x15 Inch Heat Press for T Shirts9.6/10View on Amazon
  3. 315x15 Heat Press 5 in 1 with 30oz Tumbler Press15x15 Heat Press 5 in 1 with 30oz Tumbler Press9.7/10View on Amazon
  4. 4TransOurDream PTFE Teflon SheetsTransOurDream PTFE Teflon SheetsView on Amazon
  5. 5Selizo 10 Pack Teflon Sheet for Heat Press Transfer Sheet NonSelizo 10 Pack Teflon Sheet for Heat Press Transfer Sheet NonView on Amazon
  6. 6Easy Heat Press Mat 12x12 with Teflon Sheets 12x16 Inch 3 PackEasy Heat Press Mat 12x12 with Teflon Sheets 12x16 Inch 3 PackView on Amazon
  7. 7YTFGGY 3 Pack Teflon Sheets for Heat Press 15x15 and 3 RollsYTFGGY 3 Pack Teflon Sheets for Heat Press 15x15 and 3 RollsView on Amazon
  8. 8Selizo 10 Pack PTFE Teflon Sheet for Heat Press 16" x 24" NonSelizo 10 Pack PTFE Teflon Sheet for Heat Press 16" x 24" NonView on Amazon
  9. 9HTVRONT Teflon Sheets for Heat PressHTVRONT Teflon Sheets for Heat PressView on Amazon

Teflon sheet vs silicone heat press pad is the choice between a thin non-stick shield that sits on top of the transfer and a thick mat that sits under the garment. A Teflon sheet protects the top platen with a non-stick surface, while a thick mat sits under the garment, absorbs heat and protects the surface below. Pick the sheet when your press and your transfers need a clean barrier, and pick the pad when your base needs a layer that absorbs heat and protects the surface below.

Other machines to compare

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Teflon Sheet vs Silicone Heat Press Pad: How Each One Works

A Teflon sheet is a thin PTFE sheet that sits between the top platen and the transfer. The listings describe it as non-stick, reusable and easy to wipe clean, and the TransOurDream sheets can be cut to any size. It suits heat transfer, sublimation, HTV vinyl and DTF work, and it keeps ink and adhesive off the platen. The TransOurDream set lists heat resistance up to 600°F, and the Selizo set lists insulation up to 600°F.

A heat press pad is a thick mat that sits under the garment or on the work surface. The ecraft mat measures 11 x 13 inches and about 0.5 inches thick, with a stated maximum of 428°F (220°C). The listing describes the mat material as non-stick and refractory, and states that it absorbs heat and moisture, protects countertops and furniture from overheating, and works with the Cricut EasyPress 2 and Cricut EasyPress. The listing calls the mat double-sided.

Platen covers sit in between the two ideas. The Sanshare set includes a cover for the top platen and a cover for the bottom platen, in a 15 x 15 size. The covers use Teflon sheet material with a silicone surface that wipes clean, and the listing states that they remove the need for loose sheets or butcher paper during pressing. The listing states a 1 year manufacturer warranty.

Size and Fit: Match the Sheet or Pad to Your Press

Start from the platen size. The TransOurDream sheets measure 16 x 20 inches and the listing states that the size fits 15 x 15 automatic heat press machines. The sheets can be cut to any size, so a larger sheet can be trimmed to fit a smaller press. The Sanshare covers measure 15 x 15 inches and wrap the top and bottom platens of a press of that size.

The ecraft mat measures 11 x 13 inches, a size the listing pairs with the Cricut EasyPress 2 and Cricut EasyPress. The listing names T-shirts, sweatshirts, banners and blankets among its uses. The Selizo sheets carry a size mismatch worth noting: the title lists 12 x 16 inches, while a bullet lists approx. 16 x 20 inches. Treat the size as uncertain until the listing is clarified, and measure the sheets on arrival. If you press DTF transfers, our best 15×15 heat press for DTF transfers guide covers presses of that size.

Heat Limits and Care

Heat limits decide which jobs each piece can handle. The TransOurDream sheets list heat resistance up to 600°F, and the Selizo sheets list an insulation effect up to 600°F. The ecraft mat lists a lower maximum of 428°F (220°C), below the 600°F figures the Teflon sheet listings state. The Sanshare covers state high temperature resistance without giving a figure, so the listing gives no ceiling to plan around.

Care is simple across all four. The TransOurDream sheets are reusable and washable. The Selizo sheets are reusable up to 1000 times and can be used on both sides. The Sanshare covers wipe clean and release pressed materials without leaving residue. The ecraft mat is light and flat, and the listing states that it can be used anywhere to set up a heat press table.

The Gear: Four Picks Ranked

The four listings below cover both sides of the choice, ranked from the strongest all-round sheet to the narrowest mat. Each entry states what the listing gives and where it stays silent.

TransOurDream PTFE Teflon Sheets, 16 x 20, 4 Pack

The TransOurDream set leads the ranking: four sheets at 16 x 20 inches, listed for heat transfer, sublimation, HTV vinyl and DTF, with heat resistance up to 600°F. The sheets are reusable, washable and can be cut to any size, and the listing states that the size fits 15 x 15 automatic heat press machines. The listing gives no warranty term, so warranty is Not stated.

Selizo Teflon Sheet for Heat Press, 4 Pack, 12 x 16

The Selizo set offers four sheets with insulation up to 600°F and reuse up to 1000 times, packed with 2 sheets per roll. The sheets are made of glass fiber, work on both sides and wipe clean after paint, glue, wax or baking clay. The size needs a caution: the title lists 12 x 16 inches while a bullet lists approx. 16 x 20 inches, so confirm the size before ordering for a press that needs an exact fit. The listing gives no warranty term.

Sanshare Heat Press Covers, 2 Pcs, 15 x 15

The Sanshare set covers both platens at once: a cover for the top platen and a cover for the bottom, in a 15 x 15 size. The covers use Teflon sheet material with a silicone surface that wipes clean, and the listing states a 1 year manufacturer warranty. The listing states no temperature figure, so plan around the covers as protection rather than as a heat-rated layer.

ecraft Heat Press Mat, 11 x 13

The ecraft mat is the thick mat option: a double-sided mat at 11 x 13 inches and about 0.5 inches thick, with a stated maximum of 428°F (220°C). The listing pairs it with the Cricut EasyPress 2 and Cricut EasyPress and lists uses from sewing and quilting to ironing T-shirts, sweatshirts, banners and blankets. The listing gives no warranty term, and the size and heat ceiling make it the narrowest pick of the four.

FAQ: lasers and CNC

Can I use a Teflon sheet instead of a silicone pad?

Yes, for many jobs: a Teflon sheet shields the top platen and releases cleanly, while a thick mat sits under the garment and absorbs heat. Use the sheet when the job needs a clean barrier between the platen and the transfer, and use the pad when the base needs a layer that absorbs heat.

What size Teflon sheet fits a 15 x 15 heat press?

The TransOurDream sheets measure 16 x 20 inches, and the listing states that the size fits 15 x 15 automatic heat press machines. The Sanshare covers measure 15 x 15 inches and wrap the top and bottom platens of a press of that size. A sheet larger than the platen can be cut to size: the TransOurDream listing states that its sheets can be cut to any size.

How hot can a Teflon sheet go?

The TransOurDream sheets list heat resistance up to 600°F. The Selizo sheets list insulation up to 600°F.

Do I still need butcher paper with platen covers?

No, according to the Sanshare listing: the covers protect both platens from ink and adhesive, and the listing states that there is no need for Teflon sheets or butcher paper. The covers wipe clean after pressing.

Can I cut a Teflon sheet to size?

Yes. The TransOurDream listing states that its sheets can be cut to any size. The Selizo listing states that its sheets can be cut into any shapes and any size.

Related: the best T-shirt heat press machine guide, Cricut EasyPress vs heat press, sublimation paper vs heat transfer paper and heat transfer paper vs heat transfer vinyl. Also see our sublimation vs heat transfer vinyl comparison.

More buying guides

Heat Presses and Sublimation ·

Best Heat Press for Shirts and Hoodies (2026)

Heat presses for shirts and hoodies compared by stated platen size, pressure adjustment, heating design, controls and warranty, from a 15 x 15 in…

Heat Presses and Sublimation ·

Best Sublimation Cup Heat Press (2026)

Four sublimation cup heat presses for tumblers, mugs and caps, compared by cup size, temperature range, automatic features and what each listing states about…