Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

What Supplies Do I Need for Heat Press Machine Work?

The supplies a heat press needs beyond the machine: placement rulers, heat tape, Teflon sheets and gloves, in pressing order.

What Supplies Do I Need for Heat Press Machine Work?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 13 Pack PTFE Teflon Sheet for Heat Press Transfer3 Pack PTFE Teflon Sheet for Heat Press Transfer9.6/10View on Amazon
  2. 22 Rolls 10mm X 33m 108ft Heat Tape,Adhesive Heat2 Rolls 10mm X 33m 108ft Heat Tape,Adhesive Heat9.6/10View on Amazon
  3. 3XEUZK Sublimation Shirts Tool Kits With 8 T ShirtXEUZK Sublimation Shirts Tool Kits With 8 T Shirt9.5/10View on Amazon
  4. 4Vowlove T-Shirt Ruler for Precise Vinyl AlignmentVowlove T-Shirt Ruler for Precise Vinyl Alignment9.5/10View on Amazon

What supplies do i need for heat press machine work? Beyond the press itself, you need four groups of supplies: placement tools to position the design, heat tape to hold it in place, protective sheets between the platen and the garment, and heat resistant gloves for handling hot work, plus the blanks and transfers you plan to press. This guide walks through each group in pressing order, then shows the gear that covers each step.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

3 Pack PTFE Teflon Sheet for Heat Press Transfer

3 Pack PTFE Teflon Sheet for Heat Press Transfer

YRYM HT9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A reusable nonstick PTFE press sheet that protects surfaces during heat press work and doubles as an oven liner.

Pros

  • Reusable and tear resistant
  • Heat resistant up to 600 degrees stated
  • Nonstick surface wipes clean of glue, wax or clay
  • Can be cut to any size

Cons

  • Title calls it heat transfer paper, but the listing describes a PTFE press sheet, not printable paper
  • No warranty term is stated
  • No fabric or garment use is stated; it is a press aid, not a transfer medium
2 Rolls 10mm X 33m 108ft Heat Tape,Adhesive Heat

2 Rolls 10mm X 33m 108ft Heat Tape,Adhesive Heat

EQUTY BAYMERS9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Polyimide heat tape in 2 rolls of 10mm by 33m, rated to 482F (250C) with no residue stated.

Pros

  • 33m (108ft) rolls match the longest here
  • Rated to 482F (250C)
  • Polyimide film tape with heat adhesive
  • No residue stated

Cons

  • Only 2 rolls in the pack, the fewest here
  • No warranty term is stated
  • No safety listing is stated
  • No sublimation time or temperature tips are stated
XEUZK Sublimation Shirts Tool Kits With 8 T Shirt

XEUZK Sublimation Shirts Tool Kits With 8 T Shirt

XEUZK9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 59 item tool kit for the placement and pressing steps: 8 t-shirt rulers, 3 Teflon sheets at 12 x 16 inches, heat resistant gloves, 2 rolls of heat resistant tape, pencils, pins and tools.

Pros

  • Covers placement, protection and taping in one stated kit of 59 items
  • 3 Teflon sheets stated at 12 x 16 inches as a protective barrier
  • Heat resistant gloves with silicone bumps stated for handling hot work
  • Tape stated at 10mm width and 16m length with 300 degree C heat resistance

Cons

  • Kit only, so blanks, transfers and the press itself are separate
  • Teflon sheets are stated at 12 x 16 inches, smaller than larger platens
  • No warranty term in years is stated
  • Many small pieces to keep track of between sessions
Vowlove T-Shirt Ruler for Precise Vinyl Alignment

Vowlove T-Shirt Ruler for Precise Vinyl Alignment

Vowlove9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A placement set for the alignment step: 5 PVC t-shirt rulers with UV printed markings, a measuring tape, 40 pins and an instruction sheet for center and left chest placement.

Pros

  • 5 rulers stated for center and left chest placement with size icons
  • Premium PVC stated, flexible and reusable against breakage
  • UV printed numbers and markings stated as clear and easy to read
  • Measuring tape, 40 pins and instruction sheet stated in the set

Cons

  • Placement tools only, so sheets, tape and gloves are separate
  • No warranty term is stated
  • Rulers are stated for shirts, not for mugs or hats
  • Small and light build stated, so storage between sessions matters

What supplies do i need for heat press machine work, step by step

Start with placement. A design pressed off center can spoil a blank, so t-shirt rulers that line up to the collar, a measuring tape and pins for fixing the transfer come first. The Vowlove set states 5 rulers with size icons for center and left chest placement, and the XEUZK kit states 8 rulers with 50 positioning pins. Next comes tape: heat resistant tape holds the transfer still while the press closes, and the rolls in this guide state 10mm width with lengths of 16m and 33m. Then protection: a Teflon sheet sits between the platen and the garment as a barrier, stated at 12 x 16 inches in the kit and 16 x 20 inches in the sheet pack, so match the sheet to your platen size. Gloves close the list: heat resistant gloves with silicone bumps are stated in the kit for handling hot blanks after the press opens. The parts of a heat press guide names the machine parts these supplies work with.

Blanks, transfers and the press itself

Supplies only work with something to press. Blanks such as shirts, tote bags and other flat goods, plus the transfers themselves, whether sublimation prints, vinyl or DTF, are separate purchases from the tool kits here. The press is separate too: this guide covers the supplies around the machine, and the best heat press for home use guide covers the machines. Keep a spare blank or two for the first press of a new design, and keep the tool kit together so placement, taping and protection happen in the same order every time. The heat press maintenance guide covers cleaning and care once the press is in daily use.

Gear for each step

Each product below handles a named step above: the kit covers placement, taping, protection and handling together, the rulers cover placement, the sheets cover protection, and the tape covers taping.

Project Match

  • Shirt pressing with repeatable placement: the Vowlove rulers (on Amazon) state center and left chest icons for shirt sizes.
  • First press setup in one purchase: the XEUZK kit states rulers, sheets, tape, gloves and pins together.
  • Larger platen protection: the YRYM HT sheets (on Amazon) state 16 x 20 inches against the kit sheets at 12 x 16 inches.
  • Restocking tape for sublimation work: the EQUTY BAYMERS rolls (on Amazon) state 10mm by 33m in a 2 roll pack.
  • Blanks and transfers for each project: Not stated in these picks, bought separately.

FAQ: lasers and CNC

Do I need Teflon sheets for a heat press?

A protective sheet keeps ink and adhesive off the platen and protects the garment surface. The kit sheets state 12 x 16 inches and the sheet pack states 16 x 20 inches, so match the sheet to the platen.

What tape works in a heat press?

Heat resistant tape made for press work. The rolls here state 10mm width, with 16m and 33m lengths, and one maker states 300 degree C heat resistance.

How do I center a design on a shirt?

Use a t-shirt ruler lined up to the collar. The Vowlove rulers state center and left chest placement with size icons, plus pins for fixing the transfer before pressing.

Are gloves needed for heat press work?

Gloves help when handling hot blanks after the press opens. The kit states heat resistant gloves with silicone bumps for grip during handling.

What else do I need besides these supplies?

The press, blanks and transfers. These picks cover placement, taping, protection and handling; the machine and materials are separate purchases.

Related: the craft machines hub, best heat press for home use and best heat press machine for small business. Also see our parts of a heat press guide.

More buying guides