Cost of CO2 Laser: What to Expect Before You Buy
What a CO2 laser costs, from the machine itself to the chiller, rotary axis, software and running costs, and how to compare two machines before buying.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
OMTech 100W CO2 Laser Engraver with 4 Way Pass Through Air9.7/10View on Amazon - 2
xTool P2S 55W CO2 Laser Cutter9.7/10View on Amazon - 3
VEVOR 60W CO2 Laser Engraver9.6/10View on Amazon
A sign maker pricing a first batch of cutting boards, a leather worker eyeing tumblers, a small shop weighing a second machine: the question is the same, and the answer is not a single figure. The cost of CO2 laser machines depends on wattage, work area and what ships in the box, and the running costs that follow the purchase matter as much as the machine itself. This guide walks through each driver in order, using the machines listed here as examples, so the cost can be compared like-for-like.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
This guide gives no prices, because the listings do not state them. Cost depends on wattage, work area and what ships in the box, so the sections below explain the drivers instead.
The quick answer
The cost of a CO2 laser rises with wattage, work area and included extras. A desktop 45W machine with a 12 in by 8 in work area is the smallest machine in these listings, while a 150W cabinet machine with a 55 in by 35 in work area, a built-in chiller and autofocus sits at the other end. Between them sit a 60W machine with a 16 in by 24 in bed and a 100W machine with a 24 in by 35 in bed. A chiller, a rotary axis, a camera and autofocus each add to the machine, and the tube and ventilation add to the running cost.
What sets the cost of CO2 laser machines
The cost comes down to wattage, work area, what ships in the box, and the running costs after purchase.
Wattage and cut depth
The listings here run from 40W to 150W. The OMTech K40+ cuts 0.4 in acrylic and 0.31 in wood, the 60W OMTech engraves as deep as 0.4 in on nonmetallic materials, the VEVOR 100W (on Amazon) cuts materials up to 0.59 in thick in one pass, and the VEVOR 55W (on Amazon) is recommended for acrylic up to 7 mm and wood up to 5 mm. Higher wattage also means a bigger tube and a bigger cabinet, and usually a chiller rather than a water pump. Rated speed varies too: most K40+ bundles list 300 mm/s, the VEVOR 55W 500 mm/s, the VEVOR 100W 19.7 ips, and the Pro 150W up to 1200 mm/s. See the CO2 tube vs diode module comparison for how tube machines differ from diode machines.
Work area and machine size
Work area decides the size of the job. The K40+ gives a 12 in by 8 in bed, the 60W gives 16 in by 24 in, the VEVOR 55W gives 20 in by 12 in, the VEVOR 100W gives 24 in by 35 in, stated as 840 in² of workspace, and the Pro 150W gives 55 in by 35 in. A bigger bed lets a shop batch more blanks per run, and it also means a heavier machine: the 60W weighs 187.0 lb, the VEVOR 55W 120.59 lb, the VEVOR 100W 551.16 lb, and the Pro 150W 1,190 lb. The K40+ measures 31.9 in by 19.7 in by 9.8 in, while the Pro 150W measures 82.68 in by 65.75 in by 42.32 in, so the bench and the floor matter too.
What ships in the box
Extras move the cost as much as wattage. A water chiller ships with some K40+ bundles and is built into the Pro 150W as a CW-5200 chiller, while the VEVOR 55W cools with a water pump. A rotary axis ships with one K40+ bundle and with the VEVOR 55W, and the other K40+ bundles list rotary axis compatibility, for cylindrical objects. The VEVOR 55W adds a 5MP camera and autofocus, and the Pro 150W adds autofocus, a 4-way pass-through and X/Y servo motors. Air assist is built into every machine here, and the K40+ lists a 45 degree air assist angle. Software is LightBurn on most listings here, with LaserGRBL and RDWorks named on some.
Running costs to plan for
The tube is the running cost that matters most. The 60W listing states its DC tube delivers 60W of power for up to 1000 hours of usage, the VEVOR 55W states a tube life of 3,500+ hours, and the Pro 150W states an 11,000-hour lifespan for the machine. Tubes wear with use, so the hours a shop runs decide how often a tube is replaced. Ventilation is the next cost: every machine here vents smoke, and the K40+ listings combine an exhaust fan with air assist. Warranty terms differ too: OMTech states 2 years of comprehensive service on the K40+ and Pro 150W, the 60W states 2 years with 6 months for parts, the K40+ chiller bundle states a 1 year general warranty with 6 months for tube and power supply, and the VEVOR 100W states no warranty while the VEVOR 55W states not applicable.
Safety and setup costs
A CO2 laser needs ventilation, fire safety and eye protection, and each adds to the setup cost. Vent fumes outdoors or use a filter designed for laser fumes; see the fume extractor guide. Keep a suitable extinguisher within reach and never leave a running job unattended. Use eyewear only if its listing states an optical density and a wavelength range that matches the machine. Never laser PVC, vinyl, PVC-based faux leather, polycarbonate or ABS. The K40+ listings state door and water protection, an emergency stop and a flame-retardant window, the 60W states a cover interlock that cuts the beam if the window is opened, and the VEVOR 100W states that power cuts off when the window is opened, with an emergency stop. Laser class is stated on every machine here: Class 2 on the OMTech machines, Class 1 on the VEVOR 100W and Class 4 on the VEVOR 55W.
How to compare two CO2 laser machines
Compare like with like, in this order:
- Wattage: compare optical output, not input. The listings here state watts as the tube rating; the K40+ also states 0.827 mW output power beside its Class 2 rating, a different figure from the 45W tube, so read the label.
- Work area: compare the bed in inches as listed, and check the listing against its spec table. The Pro 150W title states a 55 in by 35 in work area while its spec table states 55 in by 34 in, and the K40+ chiller bundle title states 45W while its bullets describe a 40W machine.
- What ships in the box: chiller, rotary axis, camera, autofocus and software. LightBurn is named on most listings here; RDWorks is named on the 60W and the VEVOR 55W.
- Running costs: tube life in hours, warranty term and ventilation. The 60W tube is rated for up to 1000 hours, the VEVOR 55W tube for 3,500+ hours, and the Pro 150W states an 11,000-hour lifespan for the machine.
- Machine size and weight: the K40+ measures 31.9 in by 19.7 in by 9.8 in, while the Pro 150W measures 82.68 in by 65.75 in by 42.32 in and weighs 1,190 lb, so check the bench and the floor.
FAQ: lasers and CNC
What does a CO2 laser cost?
It depends on wattage, work area and what ships in the box. The listings here run from a 45W desktop machine with a 12 in by 8 in work area to a 150W cabinet machine with a 55 in by 35 in work area, a built-in chiller and autofocus. This guide gives no prices, because the listings do not state them.
Does wattage change the cost?
Yes. Higher wattage cuts thicker material and works faster, and it comes with a bigger tube, a bigger cabinet and usually a chiller. The 45W K40+ cuts 0.4 in acrylic and 0.31 in wood, while the 100W VEVOR cuts materials up to 0.59 in thick in one pass.
What adds to the cost besides the machine?
A chiller, a rotary axis, a camera, autofocus and software, plus ventilation, the tube and the warranty. The K40+ bundles show how the box changes: one ships with a rotary axis, one with a CW-3000 chiller, and one with LightBurn and a water chiller.
How long does a CO2 laser tube last?
The 60W listing states its tube delivers 60W for up to 1000 hours, the VEVOR 55W states a tube life of 3,500+ hours, and the Pro 150W states an 11,000-hour lifespan for the machine as a whole. The 60W listing adds that the tube doubles its lifespan when consistently used at lower settings.
Is a chiller included with a CO2 laser?
Not always. The Pro 150W has a built-in CW-5200 water chiller, some K40+ bundles ship with a CW-3000 chiller or a water chiller, and the VEVOR 55W cools with a water pump. Check the bundle: a chiller and a water pump are different cooling setups.
What size work area is needed?
It depends on the job. The K40+ gives a 12 in by 8 in bed, the 60W gives 16 in by 24 in, and the VEVOR 100W gives 24 in by 35 in, stated as 840 in² of workspace. Measure the largest piece the shop makes, then match the bed to it.
Related: the laser engraver hub, the CO2 laser cutters and the best laser engraver for small business guide. Also see the how to choose a laser engraver guide and the how to price laser engraving work guide.




