Can Cricut Cut Magnet Sheets? Magnet Sheets Compared
Can cricut cut magnet sheets? The Mr. Pen and Bright Creations sheets are sold as cuttable, but no maker states a Cricut setting; compared here on size, thickness, count and backing.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Bright Creations 24 Pack Magnetic Sheets for Die9.6/10View on Amazon - 2
Mr. Pen- Adhesive Magnetic Sheets, 8" x 10"9.6/10View on Amazon - 3
UNIMEIX 24 Pcs Magnetic Sheets for Die Storage9.6/10View on Amazon - 4
Copkim 2 Pcs 9''W 12.5''L Magnetic Cutting Shim9.5/10View on Amazon
Can cricut cut magnet sheets? The Mr. Pen sheets (on Amazon) and the Bright Creations sheets (on Amazon) are sold as cuttable, but no maker here states Cricut compatibility or a Cricut blade setting. The other 2 are made to hold or store dies, not to be cut into shapes, and the rest of this guide compares the sheets on size, thickness, count and adhesive backing.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Bright Creations 24 Pack Magnetic Sheets for Die
A 24-pack of non-adhesive magnet sheets, 5 x 7 in, made from malleable rubber and sold as easy to cut for crafts and storage.
Pros
- Easy-to-cut sheets for crafts, storage and refrigerator use
- 24 sheets in the pack, the largest count here
- Double-sided sheets turn photos and prints into magnets
- Malleable rubber build, made to trim to fit
Cons
- No Cricut compatibility or blade setting is stated
- Non-adhesive, so the sheet holds by magnetism
- No sheet thickness is stated
- No warranty term is stated

Mr. Pen- Adhesive Magnetic Sheets, 8" x 10"
Adhesive magnet sheets, 8 x 10 in, 4 in a pack, sold as cuttable magnets for crafts, photos and classroom decorations.
Pros
- Cuttable sheets, to cut into whatever design is needed
- Adhesive side holds photos and artwork, and the magnet side holds to metal with no glue or screws
- 8 x 10 in sheets suit photos, artwork and classroom decor
- 4 sheets in the pack leave room to try designs
Cons
- No Cricut compatibility or blade setting is stated
- 4 sheets in the pack, fewer than the 24-sheet packs here
- Black sheets only, per the color stated
- No storage bag is listed in the pack

UNIMEIX 24 Pcs Magnetic Sheets for Die Storage
A 24-piece set with 12 magnetic sheets, 7.0 x 5.0 in and 0.8 mm thick, plus 12 clear storage bags for dies and stamps.
Pros
- 12 magnetic sheets plus 12 clear storage bags in one set
- Two faces: black magnetic surface, white writing board
- 0.8 mm thick sheets of ferrite powder and rubber
- 7.0 x 5.0 in sheets suit card making, stamps and stencils
Cons
- No Cricut compatibility or blade setting is stated
- Sold for die and stamp storage, not for cutting shapes
- 7.0 x 5.0 in sheets are smaller than the 8 x 10 in ones
- No warranty term is stated

Copkim 2 Pcs 9''W 12.5''L Magnetic Cutting Shim
Two magnetic shims, 9 in wide and 12.5 in long, with a marked grid and built-in ruler, made to hold dies in a die-cut machine.
Pros
- Made for die-cut machines, holding dies in place
- Marked grid and built-in ruler in inches and cm
- 12.5 in long, the longest stated length here
- Strong attraction, no movement during cutting
Cons
- No Cricut compatibility or blade setting is stated
- A shim that holds dies, not a sheet to cut into shapes
- Only 2 shims in the pack, the smallest count here
- Black shims only, per the color stated
Can cricut cut magnet sheets: what the sheets state
Some sheets here are sold for cutting into shapes: the Mr. Pen sheets are cuttable magnets, and the Bright Creations sheets are easy to cut. The Copkim shims sit in a die-cut machine and hold dies in place, and the UNIMEIX sheets (on Amazon) are made for die and stamp storage. For the die-cut side, see how to use a die-cutting machine.
The makers state 0.03 in for the Copkim shims, 0.8 mm for the UNIMEIX sheets, and 0.04 in for the Mr. Pen sheets, while no sheet thickness is stated for the Bright Creations sheets. Size runs from 5 x 7 in to 9 x 12.5 in, with the Mr. Pen sheets at 8 x 10 in and the UNIMEIX sheets at 7.0 x 5.0 in. Count runs from 2 shims to 24 sheets.
Follow the cutting machine manual, and measure the sheet before cutting.
The magnet sheets
The sheets below are the ones to measure and match to the job: each card states the size and count the maker lists, and the thickness where the maker states one.
Match size, thickness and count to the job
Start with size: the sheets run from 5 x 7 in to 9 x 12.5 in, so pick the sheet that covers the shape. Then check thickness: the stated figures are 0.03 in, 0.8 mm and 0.04 in, and no thickness is stated for the Bright Creations sheets. Then check count and backing: packs run from 2 shims to 24 sheets, the Mr. Pen sheets are adhesive, and the Bright Creations sheets are non-adhesive.
- For shapes to cut out: the Mr. Pen and Bright Creations sheets.
- For holding dies in place: the Copkim shims, made for die-cut machines.
- For storing dies and stamps: the UNIMEIX set, with 12 sheets and 12 bags.
FAQ: lasers and CNC
Can a Cricut cut magnet sheets?
The Mr. Pen sheets are cuttable magnets, and the Bright Creations sheets are easy to cut, but no maker here states Cricut compatibility or a Cricut blade setting. The other 2 sheets are made to hold or store dies, not to be cut into shapes.
How thick are the magnet sheets in this guide?
The Copkim shims state 0.03 in, with 0.8 mm given alongside, the UNIMEIX sheets state 0.8 mm, and the Mr. Pen sheets state 0.04 in. No thickness is stated for the Bright Creations sheets.
Which magnet sheet is adhesive?
The Mr. Pen sheets carry adhesive backing to hold photos and artwork, with the magnetic side for metal surfaces, and the Bright Creations sheets are non-adhesive. No adhesive backing is stated for the other two sheets.
What sizes do the magnet sheets come in?
The Mr. Pen sheets are 8 x 10 in, the UNIMEIX sheets are 7.0 x 5.0 in, the Copkim shims are 9 x 12.5 in, and the Bright Creations sheets are 5 x 7 in.
How many sheets come in each pack?
The Mr. Pen pack holds 4 sheets, the UNIMEIX set holds 12 sheets plus 12 bags, the Copkim pack holds 2 shims, and the Bright Creations pack holds 24 sheets.
Related: the craft machines hub, best blade for Cricut Explore and best die-cut machine for card making.




