Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Can Cricut Cut Felt Sheets? Blades and Mats Guide

Can Cricut cut felt sheets? Yes, with a fabric mat that holds the sheet flat and a Rotary Blade or Bonded-Fabric Blade, felt cuts cleanly on a Cricut Maker or Explore.

Can Cricut Cut Felt Sheets? Blades and Mats Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1REALIKE 12x12 Fabric Cutting Mat CompatibleREALIKE 12x12 Fabric Cutting Mat Compatible9.5/10View on Amazon
  2. 2Cricut FabricGrip Adhesive Cutting Mat 12inx 12inCricut FabricGrip Adhesive Cutting Mat 12inx 12in9.5/10View on Amazon

A felt sheet turns into ornaments, applique, coasters and soft toys only if the cutter holds it flat and the blade slices the fibers instead of dragging them. Can cricut cut felt sheets? Yes, with a fabric mat that grips the sheet and a blade made for fabric: the Cricut FabricGrip mat holds the sheet in place, and the maker names the Rotary Blade or Bonded-Fabric Blade for cutting fabric. The rest of this guide covers the mat, the blade and the setup that keeps felt cuts clean.

LaserEngraveHQ earns a commission when you buy through links on the product pages, at no extra cost to you. Read the affiliate disclosure.

REALIKE 12x12 Fabric Cutting Mat Compatible

REALIKE 12x12 Fabric Cutting Mat Compatible

REALIKE9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 12x12 fabric mats with grid lines and a sticky area sized 12x12 in, made for Cricut Maker and Explore machines.

Pros

  • 3 mats in the pack, so spares are on hand
  • Exact grid lines on the mat help place the felt sheet square before the cut
  • Fits Maker 4, Maker 3, Maker, Explore 4, Explore 3, Air 2, Air and One
  • Maker states non-toxic materials that are not easy to break

Cons

  • No blade is included, so the blade comes separately
  • Protective film must stay on after use or dust and scraps dull the stickiness
  • No warranty term is stated
  • Sticky area fits felt sheets up to 12x12 in only
Cricut FabricGrip Adhesive Cutting Mat 12inx 12in

Cricut FabricGrip Adhesive Cutting Mat 12inx 12in

Cricut9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The Cricut FabricGrip mat in a 12x12 in size with light adhesion for fabric, made for Cricut Maker and Explore machines.

Pros

  • Light adhesion holds fabric flat for clean cuts
  • Made for the Cricut Rotary Blade or Bonded-Fabric Blade
  • Reusable mat with a clear protective film for storage
  • Suits cotton, polyester, denim and more, per the maker

Cons

  • No blade is included, so the blade comes separately
  • No warranty term is stated
  • Cutting area is 12x12 in, so larger felt sheets do not fit
  • Clear protective film must stay on in storage or dust and scraps reach the surface

Can Cricut Cut Felt Sheets?

Felt is a fabric, and the fabric mat is the part that makes the cut work. The Cricut FabricGrip mat is built for that job: the listing describes it as an interface between the material and the machine that holds the material in place for clean cuts, with light adhesion for a wide variety of fabric materials including cotton, polyester, denim, and more.

The cut itself comes from the blade. The FabricGrip listing names the Cricut Rotary Blade or Bonded-Fabric Blade for cutting fabric, and the mat is compatible with Cricut Maker and Cricut Explore machines. That pairing, a fabric mat plus a fabric blade, is the whole answer: felt sheets cut on a Cricut when the sheet stays flat and the blade is made for fabric.

Which Blade Cuts Felt on a Cricut

The FabricGrip listing names two blades for fabric cutting: the Cricut Rotary Blade and the Bonded-Fabric Blade. Either one pairs with the FabricGrip mat, and the listing names both blades without stating which one suits felt better. Both blades are named in the same listing as the mat, so the pairing is stated by the maker rather than guessed.

What the listing does not state is a blade setting for felt, a cut pressure or a number of passes, so this guide gives none of those. Use the blade the maker names for fabric, keep the sheet flat on the mat, and check the first cut before running a full sheet of pieces.

The Gear for Cutting Felt Sheets

The cut needs two things: a mat that holds the felt sheet flat and a blade made for fabric, and the two mats below cover the holding step.

How to Cut a Felt Sheet on a Cricut

Start with a clean mat. Lay the felt sheet on the sticky area and press it down so it lies flat with no curl at the edges; the maker names the Cricut Applicator and Remover Set for applying material and for removing tiny cuts and threads. Load the mat, pick the Rotary Blade or Bonded-Fabric Blade, and cut.

After the cut, lift the pieces with a spatula and scrape away the excess pieces with a scraper, the two tools the REALIKE listing names for clearing a mat. Then put the transparent protective film back on the mat: both listings state that the film keeps dust and tiny scraps off the sticky surface when the mat is not in use.

FAQ: lasers and CNC

Can Cricut cut felt sheets?

Yes. Use a fabric mat such as the Cricut FabricGrip mat to hold the sheet flat, and cut with the Cricut Rotary Blade or Bonded-Fabric Blade, the two blades the maker names for fabric cutting.

Which Cricut mat should felt sheets go on?

A fabric mat with light adhesion, such as the Cricut FabricGrip mat or the REALIKE fabric mat. Both list a 12×12 in sticky or cutting area, and both are made for Cricut Maker and Explore machines.

Which blade cuts felt on a Cricut?

The Cricut Rotary Blade or the Bonded-Fabric Blade. The FabricGrip listing names both blades for cutting fabric on the FabricGrip mat.

Can a Cricut Explore cut felt sheets?

Yes, with a fabric mat. The FabricGrip mat is compatible with Cricut Maker and Cricut Explore machines, and the REALIKE mat lists Explore 4, Explore 3, Air 2, Air and One among the machines it fits.

What size felt sheet fits a 12×12 mat?

A sheet up to 12×12 in fits the sticky area of the REALIKE mat and the cutting area of the Cricut FabricGrip mat. A larger sheet does not fit a 12×12 in area.

How do you keep a fabric mat sticky?

Keep the transparent protective film on the mat after use. Both listings state that the film keeps dust and tiny scraps off the sticky surface when the mat is stored.

Related: the best Cricut cutting mat, can Cricut cut magnet sheets and best blade for Cricut Explore.

More buying guides