Best UV Resin: 5 Picks for Jewelry and Craft Casting
5 hard-type UV resin kits for jewelry and craft casting, compared on hardness, shrinkage, viscosity and time under the lamp.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallLET’S RESIN 500g9.6/10View on Amazon - 2
Best for Fine DetailLET’S RESIN 300g9.6/10View on Amazon - 3
Best Bulk KitKISREL 1000g9.6/10View on Amazon - 4
Best Small BatchKISREL 100g9.5/10View on Amazon - 5
Best Sunlight OptionMR. RESIN 500g9.2/10View on Amazon
A pendant mold filled with clear resin, a keychain charm waiting under the lamp, a small casting that needs to set hard and stay clear: that is the work the best uv resin does. This guide compares 5 hard-type UV resin kits for jewelry and craft casting, using only what each listing states: size, hardness, shrinkage, viscosity and time under the lamp.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall LET’S RESIN 500g: 85D hardness, less than 2% shrinkage and a refractive index over 1.5 times higher, in a 500 g bottle. Check price on Amazon
- Best for Fine Detail LET’S RESIN 300g: A 2000cps low-viscosity resin that flows into tiny molds, with 85D hardness and less than 2% shrinkage. Check price on Amazon
- Best Bulk Kit KISREL 1000g: 1000 g across 4 bottles with cups, a mixing stick and a mixing spoon, hardening in 1-3 minutes under a 36W lamp. Check price on Amazon
- Best Small Batch KISREL 100g: A 100 g hard-type kit that hardens in 1-3 minutes under a 36W UV lamp, with a non-stick finish. Check price on Amazon
- Best Sunlight Option MR. RESIN 500g: A 500 g resin that hardens under a UV lamp, LED or sunlight, for pieces made away from a lamp. Check price on Amazon
Machines on the list

LET'S RESIN UV Resin, 500g Hard Ultraviolet Epoxy
A 500 g hard-type UV resin with 85D hardness, less than 2% shrinkage and a refractive index the maker lists as more than 1.5 times higher.
Pros
- 85D hardness with less than 2% shrinkage, for durable pieces that hold their shape
- Refractive index listed as more than 1.5 times higher, for a clear finish that resists yellowing
- Low-viscosity formula for bonding glass and crystal crafts and for drawing 3D designs
- Low odor with reduced VOC volatile components, per the listing
Cons
- No lamp time is stated, so the hardening time under a lamp is not given
- No warranty term is stated
- No viscosity figure is stated, only that the formula is low viscosity
- The 1-year shelf life means the bottle does not keep indefinitely

LET'S RESIN UV Resin, 300g Hard Resin Kit
A 300 g hard-type UV resin with 85D hardness, less than 2% shrinkage and a 2000cps low-viscosity flow for tiny molds.
Pros
- 2000cps low viscosity that flows into tiny molds and fine detail
- 85D hardness with less than 2% shrinkage, for scratch-resistant pieces
- Hardens in minutes under UV light with no mixing required
- Low odor with anti-yellowing properties, for a clear finish that stays bright
Cons
- No warranty term is stated
- No lamp wattage is stated, so the minutes figure has no lamp size attached
- At 300 g it holds less resin than the 500 g and 1000 g picks
- The listing gives no shelf life

KISREL UV Resin 1000g, Upgraded Hard Crystal Clear
A 1000 g UV resin kit in 4 bottles with cups, a mixing stick and a mixing spoon, hardening in 1-3 minutes under a 36W lamp.
Pros
- 1000 g across 4 bottles, the largest amount in this guide
- Hardens in 1-3 minutes on both sides under a 36W UV lamp
- Includes 1 mixing stick, 1 mixing spoon and 2 silicone cups
- Self-leveling and self-degassing, with an anti-scratch, non-stick finish
Cons
- No hardness figure is stated
- No shrinkage figure is stated
- No warranty term is stated; the warranty line only points to the instruction manual
- No viscosity figure is stated

KISREL UV Resin 100g, Hard Type UV Resin Kit
A 100 g hard-type UV resin kit of polyurethane acrylic resin, hardening in 1-3 minutes under a 36W UV lamp.
Pros
- Hardens in 1-3 minutes under a 36W UV lamp
- Polyurethane acrylic resin formula, per the listing
- Hard, non-stick finish that stays crystal clear and resists yellowing
- Self-leveling and self-off-gassing, with greatly reduced odor
Cons
- No hardness figure is stated
- No shrinkage figure is stated
- No warranty term is stated; the warranty line only points to the instruction manual
- At 100 g it is the smallest bottle in this guide

MR. RESIN UV Resin 500g Crystal Clear UV Epoxy
A 500 g crystal clear UV resin for crafts, jewelry, keychains, molds and doming, hardening with a UV lamp, LED or sunlight.
Pros
- Hardens with a UV lamp, LED or sunlight, the widest hardening choice in this guide
- 500 g bottle for jewelry, keychains, molds, doming and rock painting
- Crystal clear finish, per the listing
- A 500 g bottle, the same size as the top pick
Cons
- The listing gives almost no detail: 1 bullet line and a spec table only
- No hardness, shrinkage or viscosity figure is stated
- No lamp time is stated
- No warranty term and no safety statement are given
Other machines to compare
LET'S RESIN UV ResinCheck price on Amazon
YOBTOP UV Resin 2000g BulkCheck price on Amazon
LEOBRO Silicone Mat for Resin MoldsCheck price on Amazon
Sakolla 5 Pieces Christmas Silicone Resin Molds 3D SnowflakeCheck price on Amazon
YIEHO 300g UV Resin Glue Crystal ClearCheck price on Amazon
Specs compared
| Resin | HQ Score | Size | Hardness | Shrinkage | Viscosity | Lamp time | Safety statement |
|---|---|---|---|---|---|---|---|
| LET’S RESIN 500g | 9.6/10 | 500 g | 85D | Less than 2% | Low viscosity | Not stated | Low odor, low VOC stated |
| LET’S RESIN 300g | 9.6/10 | 300 g | 85D | Less than 2% | 2000cps | Minutes under UV light | Low-odor, green materials stated |
| KISREL 1000g | 9.6/10 | 1000 g (35.3 oz) | Not stated | Not stated | Not stated | 1-3 minutes, both sides, 36W lamp | Non-toxic material stated |
| KISREL 100g | 9.5/10 | 100 g | Not stated | Not stated | Not stated | 1-3 minutes, 36W lamp | Non-toxic materials stated |
| MR. RESIN 500g | 9.2/10 | 500 g | Not stated | Not stated | Not stated | UV lamp, LED, sunlight | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 13 November 2026. Hardness, shrinkage and viscosity figures appear only where the listing states them.
What the listings tell you, and what they leave out
5 listings were read for this guide. 2 of the 5 list 85D hardness, and the same 2 list shrinkage below 2%. Only 1 states a viscosity figure, 2000cps on the 300 g LET’S RESIN kit. 2 state a lamp time, 1-3 minutes under a 36W lamp on both KISREL kits. None of the 5 states a warranty term, and the 2 KISREL listings point to the instruction manual instead of giving one.
The thin listing is the MR. RESIN 500 g bottle, whose bullets carry 1 line. Its title and spec table still state the size, the clear color and the hardening choices, so it stays in the guide with the lowest score.
Buying guide: choosing the best uv resin
Size and batch
Match the bottle to the run. A 100 g bottle suits a small run of jewelry pieces, a 500 g bottle suits steady making, and the 1000 g KISREL kit suits a maker who goes through resin quickly. The 1000 g kit also brings 1 mixing stick, 1 mixing spoon and 2 silicone cups, so the extras arrive with the resin.
Hardness and shrinkage
Hardness and shrinkage are the 2 figures that say how a piece holds up. Both LET’S RESIN kits list 85D hardness and shrinkage below 2%, and the 300 g kit adds that the hardened piece resists scratches and stains. The KISREL kits and the MR. RESIN bottle state neither figure, so their finish is described in words only: hard, non-stick and clear.
Viscosity and molds
Low viscosity suits fine detail. The 300 g LET’S RESIN kit is the only kit with a viscosity figure, 2000cps, and the listing ties that flow to tiny molds, 3D heart charms and fine texture on coasters. The 500 g LET’S RESIN kit describes its formula as low viscosity without a figure. For silicone molds, see the hard vs flexible UV resin guide.
Lamp time and sunlight
2 kits state a lamp time: both KISREL kits harden in 1-3 minutes under a 36W UV lamp, with the 1000 g kit stating 1-3 minutes on both sides. The MR. RESIN bottle is the only pick that lists sunlight alongside a UV lamp and LED, so pieces can harden away from a lamp. The 300 g LET’S RESIN kit states minutes under UV light without naming a lamp size.
What UV resin will not do
UV resin hardens only where ultraviolet light reaches it, so thick pours and opaque molds need care: the listings describe thin jewelry, keychains, pendants and small castings, not deep pours. If a piece stays sticky, the listings point to the same fixes: more time under the lamp, and hands off until the piece has cooled. For pieces that need a lamp, see the UV resin for 3D prints picks.
UV resin hardens under ultraviolet light, so keep the bottle in a cool place, keep the surface clean and dry when bonding, and wait for the piece to cool before touching it. Several makers here describe their resins as low odor and non-toxic. Gloves made for resin work are listed in the UV resin gloves guide.
Project Match
Match the project to the pick, using only what each listing states:
- Jewelry and pendants: the LET’S RESIN 500 g kit, with 85D hardness and a clear, yellow-resistant finish.
- Tiny molds and fine detail: the LET’S RESIN 300 g kit, with 2000cps flow into small molds.
- Big batches and coatings: the KISREL 1000 g kit, with 4 bottles and cups and stirrers in the box.
- A small run: the KISREL 100 g kit, hardening in 1-3 minutes under a 36W lamp.
- Pieces hardened in sunlight: the MR. RESIN 500 g bottle, which lists sunlight alongside a UV lamp and LED.
How the scores add up
Each resin is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A figure the listing does not publish scores nothing, and no resin here states a warranty term, so every warranty score is zero.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| LET’S RESIN 500g | 9.6 | 32 | 21 | 21 | 5 | 0 |
| LET’S RESIN 300g | 9.6 | 30 | 21 | 21 | 5 | 0 |
| KISREL 1000g | 9.6 | 29 | 20 | 22 | 5 | 0 |
| KISREL 100g | 9.5 | 28 | 20 | 20 | 5 | 0 |
| MR. RESIN 500g | 9.2 | 23 | 15 | 18 | 0 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
Why is my UV resin sticky after drying?
A sticky finish usually means the piece needs more time under the lamp, or it was touched before it cooled. The KISREL listings state 1-3 minutes under a 36W UV lamp and warn against touching the piece right after the lamp, before it has cooled.
Is UV resin flammable?
None of the listings in this guide states a flammability rating. The makers’ tips say to store the resin in a cool place, so check the bottle label for storage guidance.
Is UV resin the same as gel nail polish?
No. The listings here describe UV resin for jewelry, craft decorations, castings and coatings, not for nails, so treat them as different products with different uses.
Is UV resin safe for fish tanks?
None of the listings in this guide states aquarium or fish-tank use. The makers list jewelry, craft decorations, castings, coatings and sculptures, so use the resin only for the uses its listing states.
Related: the resin art hub, hard vs flexible UV resin, UV resin for 3D prints and the UV resin gloves guide. Also see our epoxy vs acrylic resin. Also see our rotary tool vs oscillating tool. Also see our uv resin vs epoxy resin for jewelry. Also see our silicone molds vs plastic molds for resin. Also see our how to remove epoxy resin. Also see our epoxy resin kits for beginners. Also see our how to use epoxy resin. Also see our polymer clay vs uv resin.




