UV Resin vs Epoxy Resin for Jewelry: Which One Should You Buy?
UV resin hardens fast under a lamp and suits small jewelry, while the Shabebe epoxy gives 40 minutes of work time for bigger pours, and this comparison puts four listings side by side.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
KISREL UV Resin Kit with Light9.5/10View on Amazon - 2
Shabebe Epoxy Resin, 32OZ Epoxy Resin Crystal9.5/10View on Amazon - 3
300g UV Resin Crystal Clear,Fast Curing (100 g*3)9.4/10View on Amazon - 4
Vigor Jeweler's Epoxy 2 Step 12.04519.3/10View on Amazon
A pair of earrings that stays soft in the mold, a pendant that yellows in the window. UV resin and epoxy resin both make jewelry, but they harden in different ways and suit different benches. This comparison puts uv resin vs epoxy resin for jewelry side by side, and the short answer is this: pick UV resin for small pieces you want to harden fast under a lamp, and pick epoxy resin for bigger pours, where the Shabebe kit gives 40 minutes of working time.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: UV resin wins for small jewelry pieces that must harden fast under a lamp, with the KISREL kit giving resin and lamp in one box. Epoxy resin wins for bigger pours, with the Shabebe kit giving 40 minutes of working time and resin, hardener and tools in one box.
Machines on the list

KISREL UV Resin Kit with Light
A 200g hard UV resin kit with a 48W lamp, 22 beads and a full set of cups, sticks and gloves for jewelry.
Pros
- 200g resin and a 48W lamp with 22 beads in one kit
- Hardness reaches 84D after hardening
- Low odor and low shrinkage, with antioxidants against yellowing
- Timer runs up to 5 minutes on the lamp
Cons
- Needs a DC 5V/2A power adapter, which is not included
- 200g suits small pieces, not large pours
- Only 10 plastic cups and 10 wood rods in the box
- No warranty term is stated

Shabebe Epoxy Resin, 32OZ Epoxy Resin Crystal
A 32 oz epoxy kit with a 1:1 mix, 40 minutes of work time and a hardness of up to 75 for jewelry and molds.
Pros
- 32 oz kit with resin, hardener, sticks and gloves
- 40 minutes of work time for placing pieces
- Hardness up to 75 with a crystal clear, high gloss finish
- Mixes with pigments, mica and glow pigments
Cons
- Needs measuring and mixing at a 1:1 ratio by volume
- 40 minutes of work time sets a clock on the pour
- No warranty term is stated
- The kit weighs 2.0 lb, the heaviest stated weight here

300g UV Resin Crystal Clear,Fast Curing (100 g*3)
A 300g UV resin in three 100g bottles that hardens in minutes with a 36W lamp, with no measuring or stirring.
Pros
- 300g of resin in three 100g bottles
- Hardens in minutes with a 36W UV lamp
- Self-leveling and self-degassing for a smooth finish
- Odorless after hardening, with low shrinkage
Cons
- Needs a 36W UV lamp to harden
- Darker colors need a longer hardening time
- Hardens only under UV light
- 100g bottles suit small pours, not large ones

Vigor Jeweler's Epoxy 2 Step 12.0451
A 2-step jeweler's epoxy that is clear and colorless, sets in 24 hours and applies with a brush or roller.
Pros
- Sets in 24 hours for quick project completion
- Clear and colorless with a smooth finish
- Ceramic compatible for versatile use
- Applies with a brush or roller
Cons
- Sets in 24 hours, the longest stated set time here
- 2-step resin and hardener needs mixing before the pour
- Made for jeweler's work, not large pours
- The listing leaves the amount unclear
Other machines to compare
Bsrezn 400g UV Resin Crystal ClearCheck price on Amazon
OSBANG Crystal Clear Hard UV ResinCheck price on Amazon
Sakolla 5 Pieces Christmas Silicone Resin Molds 3D SnowflakeCheck price on Amazon
YIEHO 300g UV Resin Glue Crystal ClearCheck price on Amazon
JDiction UV ResinCheck price on Amazon
WIKIMO Resin Molds for BowlCheck price on Amazon
Side by side
| Spec | KISREL UV Resin Kit | Shabebe Epoxy Resin | TQELFSS UV Resin | Vigor Jeweler’s Epoxy |
|---|---|---|---|---|
| HQ Score | 60 | 58 | 57 | 49 |
| Resin type | UV resin | Epoxy resin | UV resin | Epoxy resin |
| Amount | 200g resin | 32 oz kit | 300g resin | Not stated |
| Hardening | Under a UV lamp | Mix 1:1, 40 minutes work time | Under a UV lamp, in minutes | Sets in 24 hours |
| Hardness | 84D | Up to 75 | Not stated | Not stated |
| UV lamp | 48W, 22 beads | Not stated | 36W | Not stated |
| In the box | Resin, lamp, cups, sticks, pad, gloves | Resin, hardener, sticks, gloves | 3 bottles of resin | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 14 November 2026.
UV resin vs epoxy resin for jewelry
UV resin hardens under ultraviolet light, and the two UV listings here harden in minutes with a lamp. Epoxy resin hardens when resin and hardener mix, and the Shabebe kit gives 40 minutes of work time before it starts to set, while the Vigor epoxy sets in 24 hours. UV resin waits for the lamp, and epoxy resin starts its clock at the mix.
What the UV side gives
The KISREL kit is the complete start: 200g of hard UV resin and a 48W lamp with 22 beads, plus cups, sticks, a pad and gloves. The lamp runs on a timer of up to 5 minutes, and the resin reaches a hardness of 84D after hardening. The resin is low odor and low shrinkage, with antioxidants against yellowing.
The TQELFSS resin is the refill: 300g in three 100g bottles, crystal clear, with self-leveling and self-degassing. It hardens in minutes with a 36W UV lamp, needs no measuring or stirring, and has a nozzle for squeezing the resin out. It is odorless after hardening, with low shrinkage and yellowing resistance. A 36W lamp is the piece to buy with it.
What the epoxy side gives
The Shabebe kit is the complete epoxy start: 32 oz in all, with 16 oz of resin and 16 oz of hardener, mixed 1:1 by volume, plus sticks, gloves and instructions. It gives 40 minutes of work time, self-levels, and hardens to a crystal clear, high gloss finish with a hardness of up to 75. It suits jewelry making, molds, river tables and coatings, and it mixes with pigments, mica and glow pigments.
The Vigor epoxy is the small jeweler’s epoxy: a 2-step resin and hardener that is clear and colorless, sets in 24 hours, and works with a brush or roller. It is ceramic compatible and suits water-based projects. The listing leaves the amount unclear, so confirm the size before ordering.
Choose UV resin if
- You make small jewelry pieces and want them to harden in minutes under a lamp.
- You want a kit with resin and lamp in one box.
- You want no measuring or stirring before the pour.
Choose epoxy resin if
- You want 40 minutes of work time to place pigments and pieces.
- You pour bigger pieces, molds or river tables.
- You want a jeweler’s epoxy that sets in 24 hours.
For more resin options, see best UV resin.
Wear gloves and eye protection, work with ventilation, and keep resin off skin. Read the instructions in the kit before you start.
Project Match
- Earrings and small pendants. KISREL UV resin kit, with lamp and cups.
- Keychains and small castings. TQELFSS UV resin, with a nozzle for squeezing resin out.
- Molds, river tables and coatings. Shabebe epoxy resin, 32 oz kit with a 1:1 mix.
- Small jewelry work and ceramic pieces. Vigor jeweler’s epoxy, applied with a brush or roller.
FAQ: lasers and CNC
Does UV resin need a lamp?
Yes. The UV resin here hardens under ultraviolet light: the KISREL kit brings a 48W lamp with 22 beads, and the TQELFSS resin hardens in minutes with a 36W UV lamp. Epoxy resin hardens by mixing resin and hardener.
How long does epoxy resin take to set?
The Shabebe epoxy gives 40 minutes of work time before it starts to set, and the Vigor epoxy sets in 24 hours. Work time is the window for mixing in pigments and placing pieces.
Which resin is better for small jewelry?
UV resin, for pieces that fit under a lamp and must harden fast. The KISREL kit covers earrings and keychains with resin and lamp in one box. Epoxy resin suits bigger pours, molds and river tables.
Can I mix mica powder into these resins?
Yes, for three of the four. The KISREL kit mixes with mica powder, colorants, glitter and sequins, the TQELFSS resin mixes with mica powder, colorants and glitters, and the Shabebe epoxy mixes with pigments, mica and glow pigments.
Related: best UV resin, hard vs flexible UV resin, epoxy vs acrylic resin, and the resin crafts hub.




