Epoxy Resin Kits for Beginners: What to Buy
Four epoxy resin kits for beginners compared by size, mix ratio, working time and hardening time, from a 32 oz starter kit to a 3 gallon deep pour kit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Superclear Deep Pour Epoxy Resin 3 Gallon Kit9.6/10View on Amazon - 2
Promise Epoxy Table Top Epoxy Resin Kit 1 Gallon9.6/10View on Amazon - 3
LET'S RESIN Resin Epoxy Kit9.6/10View on Amazon - 4
JANCHUN Epoxy Resin Kit 32oz9.5/10View on Amazon
A first resin project starts with a simple idea: a coaster, a pendant, a small mold. Epoxy resin kits for beginners bundle the resin and the hardener in one box, and some add the measuring cups, sticks and gloves as well. This guide walks through what to look for, how the pour works, and which kit fits which first project.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
We have not poured these kits ourselves, so this guide compares what each listing publishes.

Superclear Deep Pour Epoxy Resin 3 Gallon Kit
A 3 gallon deep pour epoxy resin kit for 2 to 4 in single lifts, with a zero-VOC formula and a food-safe finish after fully hardening.
Pros
- Pours 2 to 4 in in a single lift
- Zero-VOC, low-odor formula
- Food-safe after fully hardening
- Low-viscosity Liquid Glass formula for a bubble-free finish
Cons
- 3 gallon size is the largest here, more than a first small project needs
- No working time is stated
- No mix ratio is stated
- 27.0 lb stated weight, the heaviest stated here

Promise Epoxy Table Top Epoxy Resin Kit 1 Gallon
A 1 gallon table top epoxy resin kit with a 1:1 mix ratio, a self-leveling finish and 21 CFR 175.300 food-contact compliance.
Pros
- 1 gallon kit with a 1:1 mix ratio
- Complies with 21 CFR 175.300 for qualifying food-contact surfaces
- Self-leveling, crystal-clear, high-gloss finish
- Water-resistant and durable for daily use
Cons
- 1 gallon size, smaller than the 3 gallon Superclear
- No working time is stated
- Not intended for cutting surfaces, cookware, or direct exposure to high heat
- No measuring cups, sticks or gloves are stated as included

LET'S RESIN Resin Epoxy Kit
A 1.5 gallon epoxy resin kit with a 1:1 mix ratio, measuring cups, stir sticks and gloves for mold casting, jewelry and craft.
Pros
- 1.5 gallon kit with resin, hardener, cups, sticks and gloves
- Bubbles disappear within an hour
- 1:1 mix ratio, easy for a first pour
- Self-leveling, crystal clear, high gloss finish
Cons
- No warranty term is stated
- Hardening takes 8 to 24 hours in summer and longer in winter
- 1-year shelf life stated
- No droppers are included in the kit

JANCHUN Epoxy Resin Kit 32oz
A 32 oz epoxy resin kit with a 1:1 mix ratio, a 45-minute working time and a starter set of cups, sticks, droppers and gloves.
Pros
- 32 oz starter kit with cups, sticks, droppers and gloves
- 45-minute working time for detailed designs
- Demolds in 8 hours and fully hardens in 24 hours
- Anti-UV formula, no yellowing within 5 years
Cons
- 32 oz is the smallest kit here
- No warranty term is stated
- No deep pour depth is stated
- No larger size is stated
What to look for in a kit
Start with the mix ratio. The LET’S RESIN, JANCHUN and Promise kits all mix 1:1 by volume, one part resin to one part hardener. The Superclear kit states no mix ratio, so check its directions before you buy it. Match the kit size to the project: the JANCHUN kit holds 32 oz for small molds and jewelry, the Promise kit holds 1 gallon for bar tops and coatings, the LET’S RESIN kit holds 1.5 gallons for molds, jewelry and coasters, and the Superclear kit holds 3 gallons for river tables and large molds.
Working time and hardening time decide how much room you have. The JANCHUN kit gives a 45-minute working time, demolds in 8 hours and fully hardens in 24 hours. The LET’S RESIN kit hardens in 8 to 24 hours in summer and longer in winter. Look at what comes in the box: the LET’S RESIN kit includes cups, sticks and gloves, and the JANCHUN kit adds droppers. The Promise and Superclear kits name no included measuring tools, so plan for cups and sticks of your own.
How a first pour works
Measure the resin and hardener in the ratio the kit states, then mix them together. The 1:1 ratio holds for the LET’S RESIN, JANCHUN and Promise kits. Pour the mixed resin into the mold or over the surface and leave it to harden. The LET’S RESIN kit is self-leveling, and its bubbles disappear within an hour; the JANCHUN kit is self-leveling too, with a mirror effect after hardening.
Hardening takes time, so plan the pour around it. The JANCHUN kit demolds in 8 hours and fully hardens in 24 hours. The LET’S RESIN kit hardens in 8 to 24 hours in summer and longer in winter, and the maker suggests warming the resin by water bath in winter. Try a small pour first, and read the manual before you start.
Choosing epoxy resin kits for beginners
Match the kit to the first project, not to the biggest size. The JANCHUN 32 oz kit fits jewelry, tumblers and small molds. The LET’S RESIN 1.5 gallon kit fits coasters, jewelry and molds. The Promise 1 gallon kit fits bar tops, tables and serving boards, with food-contact compliance. The Superclear 3 gallon kit fits river tables and large molds, with a 2 to 4 in single lift. See the best epoxy resin for beginners guide for ready-made kit picks.
Safety and workspace
Two kits include gloves: 4 with the LET’S RESIN kit, and 2 pairs with the JANCHUN kit. The LET’S RESIN resin has low volatility and is virtually odorless, and the Superclear formula is zero-VOC with a low odor for indoor pours. The Promise kit complies with 21 CFR 175.300 for qualifying food-contact surfaces when mixed and hardened per directions, and it is not intended for cutting surfaces, cookware, or direct exposure to high heat.
The gear: epoxy resin kits for beginners
Each kit below supplies the resin for the measuring, mixing and pouring steps above, with the size and hardening time matched to a first project.
FAQ: lasers and CNC
How much resin do I need for a first project?
The JANCHUN kit holds 32 oz, the Promise kit holds 1 gallon, the LET’S RESIN kit holds 1.5 gallons, and the Superclear kit holds 3 gallons.
What mix ratio do epoxy resin kits use?
The LET’S RESIN, JANCHUN and Promise kits all mix 1:1 by volume, one part resin to one part hardener. The Superclear kit states no mix ratio.
How long does epoxy resin take to harden?
The JANCHUN kit demolds in 8 hours and fully hardens in 24 hours. The LET’S RESIN kit hardens in 8 to 24 hours in summer and longer in winter.
Can I use epoxy resin on a bar top that touches food?
The Promise kit complies with 21 CFR 175.300 for qualifying food-contact surfaces when accurately measured, thoroughly mixed and fully hardened per directions. The Superclear formula is food-safe after fully hardening. The Promise kit is not intended for cutting surfaces, cookware, or direct exposure to high heat.
Related: the resin crafts hub, best epoxy resin for beginners and best resin kit for beginners. Also see our best bar top epoxy resin and best silicone for mold making.




