Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Titanium Blank Coins (2026): 5 Picks Compared

Five coin blanks for laser engraving and hand stamping, compared by material, size, finish and pack count.

Best Titanium Blank Coins (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ElaraBerry 32mm CoinsBest OverallElaraBerry 32mm Coins9.5/10View on Amazon
  2. 2Otoolling 50mm CoinsLargest CoinsOtoolling 50mm Coins9.5/10View on Amazon
  3. 3Otoolling 40mm CoinsWidest CompatibilityOtoolling 40mm Coins9.4/10View on Amazon
  4. 4gisgfim 32mm CoinsBest for Keychainsgisgfim 32mm Coins9.4/10View on Amazon
  5. 5DISABEKI 40mm CoinsBest for GiftsDISABEKI 40mm Coins9.3/10View on Amazon

A blank coin turns a small engraving job into something a buyer keeps: a challenge coin for a team, a marker for a golf bag, a keepsake for a graduation, a token for a shop counter. The surface is flat, the edge is ready for a case, and the design carries the whole job. This roundup covers the best titanium blank coins for laser engraving and hand stamping, with each pick judged on the material, size, finish and pack the listing states.

A note before the picks: the listings state iron, 304 stainless steel or plated alloy as the coin material, and none of them state titanium. Check the material line before ordering if titanium is a hard requirement.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall ElaraBerry 32mm Coins: The largest pack in this roundup, with a black mirror finish on 304 stainless steel. Check price on Amazon
  • Largest Coins Otoolling 50mm Coins: 50 mm coins in matte black 304 stainless steel, with a no-hole design for accessories. Check price on Amazon
  • Widest Compatibility Otoolling 40mm Coins: Names diode, fiber and CO2 marking plus hand stamping, with a capsule for each coin. Check price on Amazon
  • Best for Keychains gisgfim 32mm Coins: 32 mm matte black stainless blanks, each in a protective bag, for keychains and tokens. Check price on Amazon
  • Best for Gifts DISABEKI 40mm Coins: Silver-plated 40 mm coins with an acrylic case for each coin, for gifts and awards. Check price on Amazon

Machines on the list

ElaraBerry 304 Stainless Steel Coin Blanks Bulk

ElaraBerry 304 Stainless Steel Coin Blanks Bulk

ElaraBerry9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50-pack of 32 mm black mirror-finish 304 stainless steel coin blanks for laser engraving, CNC engraving and hand stamping.

Pros

  • 50 blanks in the pack, the largest batch here, for clubs, schools and sellers
  • 304 stainless steel, black mirror finish, resists rust and fading, per the listing
  • 32 mm diameter and 3 mm thick, with the carving depth stated
  • Works with laser engraving, CNC engraving and hand stamping, per the listing

Cons

  • No weight is stated in the listing
  • No individual cases are stated; the listing describes a bulk pack
  • No warranty term is stated
  • Every blank shares the same size, so the pack offers no size choice
Otoolling 20 Pack 50 mm Black 304 Stainless Steel

Otoolling 20 Pack 50 mm Black 304 Stainless Steel

Otoolling9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20-pack of 50 mm matte black 304 stainless steel coin blanks, 3 mm thick, for laser engraving and hand stamping.

Pros

  • 50 mm diameter, the largest coin size in this roundup
  • 304 stainless steel, matte black finish, resists fingerprints and scratches, per the listing
  • Non-magnetic and corrosion resistant, stated as suitable for indoor and outdoor use
  • Names CO2 laser engraving and traditional metal stamps, plus a no-hole design

Cons

  • No warranty term is stated
  • No individual cases are stated; the listing mentions protective packaging only
  • 20 blanks is a smaller batch than the 50-pack pick here
Otoolling 15 Pack 40mm X 3mm Blank Challenge

Otoolling 15 Pack 40mm X 3mm Blank Challenge

Otoolling9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-pack of 40 mm iron coin blanks with a matte black coating, threaded edges and an acrylic capsule for each coin.

Pros

  • Lists diode, fiber and CO2 marking plus hand stamping, the widest tool compatibility here
  • Matte black coating peels away under the laser to reveal metal beneath
  • Each coin ships in a snap-tight acrylic capsule inside a plastic organizer box
  • Flat surfaces with no pre-drilled holes, for flexible design placement

Cons

  • Iron core rather than stainless steel, no corrosion resistance stated
  • 15 blanks is the smallest pack in this roundup
  • No warranty term is stated
gisgfim 24 Pack Black Challenge Coin Blanks 1-1/4"

gisgfim 24 Pack Black Challenge Coin Blanks 1-1/4"

gisgfim9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 24-pack of 32 mm matte black 304 stainless steel coin blanks, 3 mm thick, for laser engraving and hand stamping.

Pros

  • 304 stainless steel, matte black finish, resists fingerprints, scratches, rust and corrosion
  • Non-magnetic, stated as suitable for indoor and outdoor use
  • Each blank is packed in its own protective bag to guard against scratches
  • No-hole design allows flexible drilling or accessory attachment, per the listing

Cons

  • No weight is stated in the listing
  • No warranty term is stated
  • Bags rather than hard cases, so less storage protection than the cased picks
  • The listing names laser engraving and hand stamping but no specific laser type
Disabeki 24 Alloy Challenge Coin Blanks

Disabeki 24 Alloy Challenge Coin Blanks

DISABEKI9.3/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 24-pack of 40 mm silver-plated alloy coin blanks, 2 mm thick, with a smooth plated surface and an acrylic case for each coin.

Pros

  • Silver-plated finish, bright polished look, suits gifts and awards, per the listing
  • Each coin comes with its own acrylic case for storage, display and gift presentation
  • 40 mm diameter, reeded edges, sized for names, dates, initials and logos
  • The listing names laser engraving for commemorative coins, wedding favors and graduation gifts

Cons

  • 2 mm thick, thinner than the 3 mm picks in this roundup
  • Plated alloy rather than solid stainless steel, per the listing
  • Warranty field states No, so no warranty term is offered
  • The listing names no specific laser type, so engraving guidance stays general

Other machines to compare

Specs compared

Coin HQ Score Material Size Pack Finish Marking Cases
ElaraBerry 32mm Coins 9.5/10 304 stainless steel 32 mm x 3 mm 50 Black mirror Laser, CNC, stamping Not stated
Otoolling 50mm Coins 9.5/10 304 stainless steel 50 mm x 3 mm 20 Matte black CO2 laser, stamping Protective packaging
Otoolling 40mm Coins 9.4/10 Iron, black coating 40 mm x 3 mm 15 Matte black Diode, fiber, CO2, stamping Capsule each, box
gisgfim 32mm Coins 9.4/10 304 stainless steel 32 mm x 3 mm 24 Matte black Laser, stamping Bag each
DISABEKI 40mm Coins 9.3/10 Silver-plated alloy 40 mm x 2 mm 24 Silver-plated Laser engraving Case each

We give each product’s specs as its manufacturer rates them; listings read 1 November 2026. The size figures below come from the bullet size lines, since the spec tables on the Otoolling listings describe packaging rather than coins.

How the picks were scored

Each coin blank is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing, which is why every pick here scores nothing for safety and warranty: no listing states a laser class, a safety certification or a warranty term.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
ElaraBerry 32mm Coins 9.5 30 21 22 0 0
Otoolling 50mm Coins 9.5 29 21 20 0 0
Otoolling 40mm Coins 9.4 30 20 19 0 0
gisgfim 32mm Coins 9.4 28 20 20 0 0
DISABEKI 40mm Coins 9.3 27 18 19 0 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.

What the listings tell you, and what they leave out

Every listing states the coin size, thickness, material and pack count, and every listing names laser engraving as a use. The gaps sit in the same places: no listing states a warranty term, a laser class or a safety certification, and the ElaraBerry and gisgfim listings state no weight.

Size figures need a careful read. The Otoolling iron listing states a 40 mm coin in its bullets, while its spec table lists 3.94 inches by 2.36 inches by 2.36 inches, which describe the packaging. The DISABEKI spec table is consistent instead: 1.57 inches by 1.57 inches by 0.08 inches matches a 40 mm coin that is 2 mm thick.

Buying guide: choosing the best titanium blank coins

Size and thickness

Coin diameter sets how much design fits on the face. The roundup spans 32 mm, 40 mm and 50 mm coins, with the Otoolling 50 mm pick the largest and the ElaraBerry and gisgfim picks the smallest at 32 mm. Thickness runs 3 mm on the iron and stainless picks and 2 mm on the DISABEKI pick.

Material and finish

The stainless picks state 304 stainless steel, with matte black finishes that resist fingerprints and scratches and a mirror black finish on the ElaraBerry pick. The Otoolling iron pick carries a matte black coating that peels away under the laser to reveal metal beneath, while the DISABEKI pick is silver-plated alloy. None of the listings state titanium.

Laser and stamping compatibility

Every pick states laser engraving, but only the Otoolling iron pick names diode, fiber and carbon dioxide systems in the same listing, plus manual metal stamping punches. The Otoolling 50 mm pick names a CO2 laser and traditional metal stamps, the ElaraBerry pick adds CNC engraving, and the gisgfim and DISABEKI picks name no laser type.

Pack size and storage

Pack counts run 15, 20, 24 and 50 across the roundup. The ElaraBerry pack holds 50 blanks, the largest batch here, while the Otoolling iron pack holds 15, the smallest.

Safety

Marking coated metal makes fumes and fine dust, so ventilate the work area and wear eye protection rated for the laser in use. Keep the beam on the coin, and never leave a job running unattended.

Project Match

Project pairings, using only the uses each listing names:

  • Challenge coins and keepsakes: every pick names challenge coins, with the DISABEKI pick adding wedding favors and graduation gifts.
  • Keychains and tokens: the gisgfim, ElaraBerry and Otoolling 50 mm picks name keychains and custom tokens.
  • Golf ball markers: the Otoolling iron, Otoolling 50 mm and gisgfim picks name ball markers.
  • Batch runs for clubs, schools and events: the ElaraBerry 50-pack, the largest batch in this roundup.
  • Gifts and awards: the DISABEKI pick, with an acrylic case for each coin.

FAQ: lasers and CNC

Are these coins titanium?

No. The listings state iron, 304 stainless steel or plated alloy, and none of them state titanium. Check the material line before ordering if the job calls for titanium.

Can a diode laser engrave these coin blanks?

The Otoolling iron pick names diode marking in its listing, alongside fiber and carbon dioxide systems. The other picks state laser engraving without naming a laser type, except for the Otoolling 50 mm pick, which names a CO2 laser.

What size coin blank suits a design?

Diameter sets how much design fits on the face. This roundup covers 32 mm, 40 mm and 50 mm coins, and thickness is 3 mm on the iron and stainless picks and 2 mm on the DISABEKI pick.

Do the coins come with cases?

The Otoolling iron pick and the DISABEKI pick ship each coin in its own acrylic case. The gisgfim pick packs each blank in a protective bag, and the ElaraBerry listing states no individual packaging.

Is there a warranty on these coin blanks?

None of the listings state a warranty term. The DISABEKI spec table is the clearest, with its warranty field stating No.

Related: the blank metal wallet cards for laser engraving, blank patches, and the aluminum business card blanks for engraving. Also see the stainless steel thin sheets. Also see the metal business card blanks. Also see the blank aluminum license plates.

More buying guides

Engraving Materials ·

How to Cut Clear Polycarbonate Sheet

Score thin clear polycarbonate sheet with a carbide cutter and snap it along the line, or slice short pieces with a heavy-duty hand cutter.