Best Blank Patches (2026): 5 Picks for Laser and Iron-On Work
Blank patches for laser engraving and iron-on projects, compared by size, shape, material and stated warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OveralliFForce 60 PU Patches9.5/10View on Amazon - 2
Best ValueGadjica 60 Mixed Shapes9.5/10View on Amazon - 3
Best Large PatchiFForce 40 Large Patches9.5/10View on Amazon - 4
Best Hat PatchesWaydress 30 Hat Patches9.4/10View on Amazon
A blank patch turns a plain hat, jacket or backpack into a piece with a name, a logo or a picture on it. Some patches take a laser engraved mark on PU leather, while most take a sublimated print pressed on with heat, and the right blank depends on the machine on the bench and the garment it will sit on. This best blank patches roundup compares the listings below on pack size, shape, material and stated settings, and marks what each listing leaves out.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall iFForce 60 PU Patches: The only pick made for CO2 laser engraving as well as iron-on, with 60 PU leather patches in 5 colors and 3 shapes. Check price on Amazon
- Best Value Gadjica 60 Mixed Shapes: 60 mixed-shape sublimation patches with clear press settings and a stated 30-day warranty. Check price on Amazon
- Best Large Patch iFForce 40 Large Patches: A 2.37 x 3.94 in rectangle with a black embroidered border, sized for big logos and photos. Check price on Amazon
- Best Hat Patches Waydress 30 Hat Patches: 30 patches in 3 shapes with a white frame, made for hats, caps and small garments. Check price on Amazon
Machines on the list

iFForce 60pcs Blank Patches for Laser Engraving
A 60-piece set of PU leather patches in 5 colors and 3 shapes, made for CO2 laser engraving and iron-on use on hats, jeans, backpacks, bags and jackets.
Pros
- Made for CO2 laser engraving and iron-on, with no sewing needed
- 60 patches in 5 colors: 20 rectangles, 20 rounded rectangles and 20 rounds
- Rectangle and rounded rectangle patches are 3 x 2 in; rounds are 2.5 x 2.5 in
- Hot melt glue back bonds with a household iron
Cons
- No sublimation use is stated, so it suits engraving rather than printed photos
- Colors stay in khaki and brown tones
- Rounds come in 2.5 x 2.5 in only
- No care or wash guidance is stated

60 PCs Sublimation Patches
A 60-piece set of mixed-shape sublimation patches in woven cloth, with rectangle, rounded rectangle and round shapes for hats, caps, backpacks and uniforms.
Pros
- 60 patches in mixed shapes, with rectangle and rounded rectangle at 3.94 x 2.37 in and rounds at 3 in
- Sublimation settings are stated: 200°C (400°F) for 30s
- Iron-on settings are stated: 140°C (285°F) for 30s, then iron again for 10-20 seconds
- Sewable by machine or by hand where ironing does not suit the fabric
Cons
- Sublimation only: no laser engraving use is stated
- Woven cloth, not leather, so it suits printed designs rather than engraved marks
- Mixed shapes mean the pack splits across shapes with no per-shape count stated
- No border or frame color is stated

iFForce Sublimation Blanks Patches
A 40-piece set of large rounded-corner rectangle sublimation patches with a black embroidered border, sized 2.37 x 3.94 in for hats, backpacks and shirts.
Pros
- Large 2.37 x 3.94 in size suits pictures and big logos
- Black embroidered border frames the design
- Polyester fabric with a sublimation coating for vibrant colors
- Sublimation and iron-on settings are stated: 400°F/200°C for 30s, then 285°F/140°C for 30s
Cons
- Rounded corner rectangles only, with no other shape in the pack
- Sublimation only: no laser engraving use is stated
- No per-patch weight or thickness is stated
- The protective backing film must stay on during sublimation, so follow the listed order

Waydress 30 Pcs Sublimation Hat Patches Blank
A 30-piece set of sublimation hat patches in 3 shapes with a white frame, sized for hats, caps, clothes and bags.
Pros
- 30 patches in 3 shapes, with 10 pieces of each shape
- White frame suits hat and cap fronts
- Rectangle at 10 x 6 cm / 3.9 x 2.36 in and round at 7.5 cm / 3 in diameter
- Sewable as well as iron-on, with high temperature glue on the back
Cons
- No warranty term is stated
- The size of the remaining shape is not stated
- Sublimation only: no laser engraving use is stated
- Iron-on range is 380-395°F for 40-60 seconds, a wider range than the other listings

15 PCs Sublimation Patches
A 15-piece set of rectangle sublimation patches at 1.97 x 3.15 in, made of polyester with a stitched edge for hats, caps, backpacks and uniforms.
Pros
- Common rectangle size at 1.97 x 3.15 in / 5 x 8 cm
- Sublimation and iron-on settings are stated: 400°F for 30s, then 285°F for 30s
- Stitched edge that does not spread, with a fine finish
- Sewable by machine or by hand for heavy fabrics
Cons
- No warranty term is stated: the spec table reads Warranty Description 2, with no unit
- Sublimation only: no laser engraving use is stated
- 15 pieces, the smallest pack in this guide
Other machines to compare
Gadjica Sublimation PatchesCheck price on Amazon
M METERXITY 6Pcs Solid Black Flag Blank Patch 3.1"x2"Check price on Amazon
100 Pcs Blank PU Leather Patches for Hats with AdhesiveCheck price on Amazon
[Red] Leather/Leatherette Patches/Sheets for Laser EngravingCheck price on Amazon
SmallCat 10 PCS Hexagonal Leather Patches for HatsCheck price on Amazon
Specs compared
| Patch | HQ Score | Pack | Material | Sizes | Attach | Warranty |
|---|---|---|---|---|---|---|
| iFForce 60 PU Patches | 9.5/10 | 60 pcs | PU leatherette | 3 x 2 in; 2.5 x 2.5 in round | Laser and iron-on | 30 days |
| Gadjica 60 Mixed Shapes | 9.5/10 | 60 pcs | Woven cloth | 3.94 x 2.37 in; 3 in round | Sublimation and iron-on | 30 days |
| iFForce 40 Large Patches | 9.5/10 | 40 pcs | Polyester | 2.37 x 3.94 in | Sublimation and iron-on | 30 days |
| Waydress 30 Hat Patches | 9.4/10 | 30 pcs | Polyester | 3.9 x 2.36 in; 3 in round | Sublimation and iron-on | Not stated |
| Gadjica 15-Pc Rectangle | 9.3/10 | 15 pcs | Polyester | 1.97 x 3.15 in | Sublimation and iron-on | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 3 November 2026. Pack is the piece count in the listing, and sizes are the patch sizes the listing states.
What the listings tell you, and what they leave out
We read 5 blank patch listings for this guide. Only the iFForce PU leather set states CO2 laser engraving, while the other listings are sublimation and iron-on blanks. Only 3 listings state a warranty term, with each reading 30 days. The Gadjica 15-piece listing disagrees with itself on count, with the title saying 15 pieces and the spec table part number saying 18 pieces.
Every listing states a pack size and a patch size, and every listing states iron-on settings except the iFForce PU leather set, which states iron-on use with a household iron and no temperature. Treat every temperature and time as the listing states it: sublimation runs at 400°F for 30s on the listings that state it, while the Waydress set presses at 380-395°F for 40-60 seconds.
Buying guide: choosing the best blank patches
Laser engraving or sublimation
Only the iFForce PU leather set states CO2 laser engraving, and it is the pick for a maker who wants an engraved mark on a patch. The other listings are sublimation blanks: print the design with sublimation ink, press it on with heat, and the patch carries a photo or full-color artwork. Pick the blank that matches the machine on the bench, not the other way round.
Patch size and shape
Patch sizes here run from 1.97 x 3.15 in on the Gadjica 15-piece set to 3.94 x 2.37 in on the Gadjica 60-piece set, with rounds at 2.5 x 2.5 in or 3 in. Rectangles suit logos and text, rounds suit badges and small marks, and mixed-shape packs suit makers who dress several kinds of garment. Measure the space on the garment before choosing a size.
Iron-on temperatures and times
Sublimation listings state 400°F for 30s, then a press at 285°F for 30s, with a short repeat iron of 10-20 seconds to fix the patch. The Waydress set states a wider press range of 380-395°F for 40-60 seconds. Keep the backing film on during sublimation where the listing says so, cover the front with a cloth before pressing, and let the patch cool before moving it.
Sewing and repairs
Every listing here carries hot melt glue on the back, so heat bonds the patch and sewing is optional on most fabrics. The Gadjica listings and the Waydress set state sewing by machine or by hand for heavy fabrics that cannot take an iron. The iFForce PU leather set also suits repair work, hiding tears and stains on hats, jeans, backpacks, bags and jackets.
Pressing runs hot: keep hands clear of the iron and the press plate, work on a heat-safe surface, and vent the area when pressing printed designs. Never press PVC or vinyl patches, and keep the patch flat until it cools.
Project Match
- Laser engraved logos on PU leather: the iFForce 60 PU leather set, made for CO2 laser engraving and iron-on.
- Team merch and uniforms: the Gadjica 60 mixed-shape set and the iFForce 40 large patches, with sublimation prints for hats, caps and shirts.
- Hat patches in a mix of shapes: the Waydress 30-piece set, with 3 shapes and a white frame.
- Small runs of rectangle patches: the Gadjica 15-piece set at 1.97 x 3.15 in.
- Repair work on hats, jeans and jackets: the iFForce 60 PU leather set, which the listing names for hiding tears and stains.
How the scores add up
Each patch set is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| iFForce 60 PU Patches | 9.5 | 30 | 21 | 21 | 0 | 2 |
| Gadjica 60 Mixed Shapes | 9.5 | 29 | 21 | 21 | 0 | 2 |
| iFForce 40 Large Patches | 9.5 | 28 | 20 | 20 | 0 | 2 |
| Waydress 30 Hat Patches | 9.4 | 27 | 19 | 19 | 0 | 0 |
| Gadjica 15-Pc Rectangle | 9.3 | 26 | 19 | 18 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What is a blank patch?
A blank patch is an unmarked patch sold for custom work: a PU leather patch for laser engraving, or a polyester or cloth patch with a sublimation coating for printed designs. Iron it on with heat, or sew it on where the listing allows.
Can I laser engrave a blank patch?
Only the iFForce PU leather set in this guide states CO2 laser engraving. The other listings are sublimation blanks with no laser use stated, so use them for printed designs pressed on with heat.
How do I iron on a sublimation patch?
Print the design with sublimation ink at 400°F for 30s, then press the patch at 285°F for 30s with a cloth over the front, and iron the surface again for 10-20 seconds to fix it. The Waydress set states a press of 380-395°F for 40-60 seconds instead.
Can I sew a blank patch on?
The Gadjica listings and the Waydress set state sewing by machine or by hand, and the iFForce PU leather set states no sewing is needed for a lasting bond. Sewing suits heavy fabrics that cannot take an iron.
What size blank patch fits a hat?
Hat patches here run from 1.97 x 3.15 in to 3.94 x 2.37 in, with rounds at 2.5 x 2.5 in or 3 in. The Waydress set is framed for hats, with a rectangle at 10 x 6 cm and a round at 7.5 cm. Measure the hat panel before choosing.
Related: the engraving materials hub, veg tan vs PU leather for laser engraving, how to laser engrave leather without burning, best sublimation blanks, best heat press machine multi function, best iron on vinyl for weeding, sublimation vs HTV for shirts, and best mini heat press.




