Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Spray for 3d Scanning Under $40 (2026): 5 Sprays Compared

Five 3D scanning sprays compared by can size, coating, drying time and the surfaces each listing states.

Best Spray for 3d Scanning Under $40 (2026): 5 Sprays Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1HXOGYUB 500ml SprayBest OverallHXOGYUB 500ml Spray9.5/10View on Amazon
  2. 2Revopoint Blue 400mlBest Vanishing CoatRevopoint Blue 400ml9.5/10View on Amazon
  3. 3AESUB Blue 3DMakerproBest for Large ObjectsAESUB Blue 3DMakerpro9.5/10View on Amazon
  4. 4AESUB Blue EinScanBest Pigment-FreeAESUB Blue EinScan9.4/10View on Amazon

A shiny part, a dark part, a clear part: the scanner sees a hole where the surface should be, and the scan comes back with gaps. A scanning spray lays a thin matte coat over the surface so the scanner can read it, and the best spray for 3d scanning under $40 is the one that coats evenly, vanishes or wipes off cleanly, and fits the surfaces you scan.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall HXOGYUB 500ml Spray: A 500ml can that covers up to 15 sq ft, with 6 tracking marker sheets and a safety material claim. Check price on Amazon
  • Best Vanishing Coat Revopoint Blue 400ml: An ultra-thin 8-15µm coating that disappears within 4 hours, with no cleaning needed. Check price on Amazon
  • Best for Large Objects AESUB Blue 3DMakerpro: A 400ml can that supports medium and large objects, with a pigment-free coat that evaporates within 4 hours. Check price on Amazon
  • Best Pigment-Free AESUB Blue EinScan: A pigment-free 400ml can for laboratories and production sites, with no cleaning required. Check price on Amazon

Machines on the list

Revopoint 3D Scanning Spray for 3D Scanners AB-P

Revopoint 3D Scanning Spray for 3D Scanners AB-P

Revopoint9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 500 ml semi-permanent spray with a thin coat of about 4.5 microns, made for reflective, transparent, black and highly textured surfaces.

Pros

  • Thin coat of about 4.5 microns preserves surface detail
  • 500 ml can, the largest size in this guide
  • Names the widest surface list here: textiles, wood, glass, painted surfaces, metal, plastic, stone, mortar and paper
  • Semi-permanent coat stays on the surface until wiped or washed off

Cons

  • Coat must be wiped or washed off after scanning
  • Listing warns all scanning sprays contain solvents
  • No scan window is stated
  • No warranty term is stated
3D Scanning Spray, with 3D Tracking Dot Marker

3D Scanning Spray, with 3D Tracking Dot Marker

HXOGYUB9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 500ml scanning spray with 6 tracking marker sheets, covering up to 15 sq ft on reflective, transparent and textured surfaces.

Pros

  • 500ml can covering up to 15 sq ft
  • 6 tracking marker sheets included
  • Listing states safety material that is skin friendly and odorless
  • Covers glass, acrylic, stainless steel and metal

Cons

  • No coating thickness stated
  • No drying time stated
  • No application distance stated
  • No warranty term in the listing
Revopoint 3D Scanning Spray for 3D Scanners

Revopoint 3D Scanning Spray for 3D Scanners

Revopoint9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 400ml blue scanning spray with an ultra-thin 8-15µm coating that disappears within 4 hours, for transparent, reflective and textured surfaces.

Pros

  • Ultra-thin 8-15µm coating for precise detail capture
  • Disappears within 4 hours with no cleaning needed
  • Works on textiles, wood, glass, metal, plastic, stone, mortar and paper
  • Made for transparent, reflective and dark objects that fail scanning

Cons

  • Contains solvents; check material compatibility before use
  • No coverage area stated
  • No application distance stated
  • No warranty term in the listing
AESUB Blue Spray for 3DMakerpro 3D Scanner

AESUB Blue Spray for 3DMakerpro 3D Scanner

3DMakerpro9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pigment-free 400ml AESUB Blue spray that evaporates within 4 hours, applied from 15-20 cm for reflective, transparent and textured surfaces.

Pros

  • Pigment-free formula for delicate equipment and laboratories
  • Evaporates within 4 hours; no cleaning required
  • Apply from 15-20 cm with even, back and forth strokes
  • 400ml volume supports medium and large objects

Cons

  • No coating thickness stated
  • No coverage area stated
  • No weight stated in the listing
  • No warranty term in the listing
AESUB Blue Spray for Einstar 3D scanner

AESUB Blue Spray for Einstar 3D scanner

EinScan9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pigment-free 400ml AESUB Blue spray for Einstar scanners that evaporates within a few hours, with no cleaning required.

Pros

  • Pigment-free formula, no pigment contamination in laboratories and production sites
  • No cleaning required; evaporates within a few hours
  • Apply from 15-20 cm with even, back and forth strokes
  • 400ml can supports medium and large objects

Cons

  • Drying time is a few hours, not a stated number of hours
  • No coating thickness stated
  • No coverage area stated
  • No warranty term in the listing

Other machines to compare

Specs compared

Model HQ Score Can size Coating Drying Surfaces Warranty
HXOGYUB 500ml Spray 9.5/10 500ml Not stated Not stated Reflective, transparent, textured Not stated
Revopoint Blue 400ml 9.5/10 400ml 8-15µm Within 4 hours Textiles, wood, glass, metal, plastic, stone Not stated
AESUB Blue 3DMakerpro 9.5/10 400ml Not stated Within 4 hours Reflective, transparent, textured Not stated
AESUB Blue EinScan 9.4/10 400ml Not stated Within a few hours Reflective, transparent Not stated
Revopoint AB-P 500ml 9.6/10 500ml Semi-permanent until wiped Not stated Reflective, transparent, black, textured Not stated

Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026.

What the spray listings tell you

This guide covers 5 scanning spray listings. Only 1 states a coverage area, and only 1 states a safety material claim. Two state that the coating disappears within 4 hours, while a third gives only a few hours with no number. None of the five states a warranty term, and two cans share the AESUB Blue name and a 400ml size while carrying different scanner branding.

Buying guide: best spray for 3d scanning under $40

Volatile or semi-permanent

Three of the five sprays vanish on their own: the Revopoint Blue and the AESUB Blue for 3DMakerpro disappear within 4 hours, and the AESUB Blue for Einstar evaporates within a few hours. The HXOGYUB states no drying time. The Revopoint AB-P is different: it is semi-permanent until wiped and non-volatile, so the coat stays until you remove it. Pick a vanishing spray when you want no cleanup after the scan, and a semi-permanent spray when you want the coat to stay put until wiped.

Can size and coverage

Can sizes here are 400ml and 500ml. The HXOGYUB and the Revopoint AB-P are 500ml cans, and the other three are 400ml cans. Only the HXOGYUB states a coverage area: up to 15 sq ft. The other listings state no coverage area, so compare cans by size and by the surfaces each listing states.

Coating and surfaces

Only the Revopoint Blue states a coating thickness: an ultra-thin 8-15µm coating. The other listings state no coating thickness. Match the spray to the surface: the Revopoint Blue lists textiles, wood, glass, painted surfaces, metal, plastic, stone, mortar and paper, the HXOGYUB lists glass, acrylic, stainless steel and metal, and both AESUB Blue cans are made for reflective, transparent and highly textured surfaces. The Revopoint AB-P adds black surfaces to that list.

Application

Both AESUB Blue cans give an application distance of 15-20 cm, with even, back and forth strokes at a steady pace. The other listings state no application distance. All scanning sprays contain solvents, per the Revopoint listing, so check material compatibility before use.

Spray safety

All scanning sprays contain solvents, per the Revopoint listing, so check material compatibility before use. The HXOGYUB listing states its spray is made of safety material that is skin friendly and odorless.

Project Match

  • Scanning a clear or reflective part: the Revopoint Blue and both AESUB Blue cans are made for reflective and transparent surfaces.
  • Scanning textiles, wood, stone or paper: the Revopoint Blue lists those surfaces.
  • Scanning stainless steel or metal: the HXOGYUB lists stainless steel and metal.
  • Scanning in a laboratory or production site: both AESUB Blue cans are pigment-free.
  • Keeping the coat on until you wipe it off: the Revopoint AB-P is semi-permanent until wiped.

How the scores add up

Each spray is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. For scanning sprays, safety points come from stated safety material, and no pick here states a warranty term.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
HXOGYUB 500ml Spray 9.5 29 20 21 4 0
Revopoint Blue 400ml 9.5 30 21 20 0 0
AESUB Blue 3DMakerpro 9.5 29 21 20 0 0
AESUB Blue EinScan 9.4 29 20 20 0 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.

FAQ: lasers and CNC

What does 3D scanning spray do?

It lays a matte coat over transparent, reflective or highly textured surfaces so a scanner can read them. The Revopoint Blue uses an ultra-thin 8-15µm coating, and the HXOGYUB covers transparent and reflective areas so the scanner captures the appearance details of the item.

How long does the coating last?

The Revopoint Blue and the AESUB Blue for 3DMakerpro disappear within 4 hours, and the AESUB Blue for Einstar evaporates within a few hours. The Revopoint AB-P is semi-permanent until wiped, and the HXOGYUB states no drying time.

Can I use scanning spray on glass and metal?

The Revopoint Blue lists glass and metal among its surfaces, and the HXOGYUB lists glass, acrylic, stainless steel and metal. Check material compatibility before use, since all scanning sprays contain solvents.

Do I need tracking markers with scanning spray?

The HXOGYUB can includes 6 tracking marker sheets. The other listings do not mention markers.

Which spray states a coverage area?

The HXOGYUB states coverage of up to 15 sq ft from a 500ml can. The other listings state no coverage area.

Related: photogrammetry vs 3d scanner, best tools to clean up 3d prints under 15, best hand tools for cleaning up 3d prints and sla vs dlp 3d printer.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.