Best Resin Filter for 3d Printer (2026): 5 Picks Compared
Five resin filters for 3D printer resin compared by material, mesh size, bottle neck fit, pack size and cleaning.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGnellkoor Steel Funnel9.6/10View on Amazon - 2
Best Reusable SteelELEGOO Steel Funnel9.5/10View on Amazon - 3
Best Double-StrainerSovol Double-Strainer9.5/10View on Amazon - 4
Best 100-Pack KitDAOKI Paper Strainers9.4/10View on Amazon - 5
Best Disposable3DMaterials Filter9.4/10View on Amazon
A fresh resin print comes off the build plate dripping, and the bottle of leftover resin on the shelf holds bits and dust from the last pour. The best resin filter for 3d printer work is the funnel and strainer that catch those bits before the resin goes back in the bottle. We compared the resin filters in this roundup by material, mesh size, bottle fit, pack size and cleaning, using only what each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Gnellkoor Steel Funnel: 304 stainless steel funnel with strainer and brush, glove warning stated Check price on Amazon
- Best Reusable Steel ELEGOO Steel Funnel: 304 stainless steel, fits bottle necks more than 16 mm Check price on Amazon
- Best Double-Strainer Sovol Double-Strainer: Double strainer with cleaning kit, 15 mm bottle neck Check price on Amazon
- Best 100-Pack Kit DAOKI Paper Strainers: 100 strainers, collapsible silicone funnel, hook and clean tool Check price on Amazon
- Best Disposable 3DMaterials Filter: 100 disposable 125 micron nylon mesh strainers Check price on Amazon
Machines on the list

Gnellkoor Resin Filter Funnel
A 304 stainless steel funnel with a strainer and brush for filtering and recycling SLA/DLP/LCD resin back into the bottle.
Pros
- 304 stainless steel funnel and strainer, food grade and corrosion resistant
- Strainer filters agglomeration and pollutants from the resin
- Cleaning brush included; wipe with a paper towel, then wash with isopropyl alcohol
- Filters: SLA/DLP/LCD photosensitive resins, for recycling into the bottle
Cons
- No bottle neck width is stated
- No warranty term is stated
- Funnel must not be reused for food filtration after resin use
- Only one funnel in the box, with no spare strainer stated

ELEGOO 3D Stainless Steel Funnel
A 304 stainless steel funnel with a strainer filter for recycling MSLA/DLP/LCD resin, sized for bottle necks more than 16 mm wide.
Pros
- 304 stainless steel funnel and strainer, durable, easy to clean and reusable
- Fits all conventional resin bottles with a bottle neck width of more than 16 mm
- Strainer filters foreign chunks of resin for a smooth, consistent flow
- Filters: MSLA/DLP/LCD resins, plus paints and varnishes
Cons
- No warranty term is stated
- No funnel dimensions or weight are stated
- No cleaning method is stated beyond easy to clean
- No mesh size is stated for the strainer

Sovol 3D Printer Stainless Steel Funnel Resin
A stainless steel double-strainer filter funnel with a cleaning kit for SLA/DLP/LCD resin, sized for a 15 mm bottle neck.
Pros
- Double strainer filters contaminants while resin is poured into the bottle
- Cleaning kit included; wipe out after use and clean with isopropanol
- Fits all conventional resin bottles with bottle neck width in 15 mm
- Filters: SLA/DLP/LCD resins, plus paints and varnishes for spray guns
Cons
- No warranty term is stated
- No mesh size is stated for either strainer
- Stainless steel grade is not stated

DAOKI 100 Pcs Paper Paint Filters 100 Micron
A kit of 100 disposable 100 micron paper strainers with a collapsible silicone funnel, a hook and a clean tool for resin and paint.
Pros
- 100 strainers in the box, each with a fine 100 micron filter
- Collapsible silicone funnel folds for storage, with a hook hole for hanging
- Clean tool included for resin removal without scratching the FEP film
- Filters: resins, paints, varnishes and stains
Cons
- No warranty term is stated
- Paper strainers are disposable, so each pour uses a fresh one
- No bottle neck width is stated
- Silicone funnel size is not stated

SuperFilter 3D Printer Resin Disposable and Paint
A pack of 100 disposable blue nylon mesh strainers with a 125 micron opening, made in Korea, for resin and paint.
Pros
- 100 strainers in the box for repeated filtering
- 125 micron blue nylon mesh with a thick paperboard rim
- Lint free mesh, designed to reduce bleed through
- Filters: 3D printer resin and paint
Cons
- No warranty term is stated
- No funnel is included, so a funnel must come from elsewhere
- No bottle neck width is stated
Specs compared
| Filter | HQ Score | Material | Mesh / strainer | Bottle neck | Pack | Cleaning |
|---|---|---|---|---|---|---|
| Gnellkoor Steel Funnel | 9.6/10 | 304 stainless steel | Strainer and brush | Not stated | 1 | Wipe, then wash with isopropyl alcohol |
| ELEGOO Steel Funnel | 9.5/10 | 304 stainless steel | Strainer filter | More than 16 mm | 1 | Not stated |
| Sovol Double-Strainer | 9.5/10 | Stainless steel | Double strainer | 15 mm | 1 | Wipe, then clean with isopropanol |
| DAOKI Paper Strainers | 9.4/10 | Paper and nylon | 100 micron | Not stated | 100 strainers, 1 funnel | Not stated |
| 3DMaterials Filter | 9.4/10 | Nylon mesh, paperboard | 125 micron | Not stated | 100 | Disposable |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026. Only the Gnellkoor listing states a safety warning, and none of the five states a warranty term.
What the listings tell you, and what they leave out
We read five resin filter listings for this guide. Three are stainless steel funnels with strainers, and two are disposable strainer packs of 100. Only two state a bottle neck width: the ELEGOO fits necks more than 16 mm wide, and the Sovol fits a 15 mm neck. Only the two disposable packs state a mesh size in microns: 100 micron on the DAOKI and 125 micron on the 3DMaterials. None of the five states a warranty term.
The 3DMaterials listing contradicts itself on pack size: the title and bullets state 100 strainers, while the spec table lists NumberOfItems as 1. We follow the title and bullets. The Gnellkoor listing is the only one that states a safety warning: wear gloves during filtration and cleaning, avoid direct skin contact with resin, and never reuse a resin funnel for food filtration.
Buying guide: choosing the best resin filter for 3d printer
Steel funnel or disposable strainer
Three picks are stainless steel funnels: the Gnellkoor, the ELEGOO and the Sovol. Steel funnels are reusable: wipe them out after use and wash them, and the Gnellkoor even includes a brush. Two picks are disposable strainer packs of 100: the DAOKI paper strainers and the 3DMaterials nylon mesh strainers. A disposable strainer suits a print run where the resin is dirty enough that cleaning a steel funnel after every pour is more work than a fresh strainer.
Mesh size: 100 micron or 125 micron
Only the disposable packs state a mesh size. The DAOKI strainers have a 100 micron filter, and the 3DMaterials strainers have a 125 micron opening. The steel funnels state no micron size: the Sovol listing says only that the mesh is the right size for filtering resin, and the Gnellkoor and ELEGOO listings describe the strainer without a number. If the mesh size matters to your workflow, pick a disposable pack with a stated size.
Bottle neck fit
Two listings state a bottle neck width. The ELEGOO fits all conventional resin bottles with a bottle neck width of more than 16 mm, and the Sovol fits bottles with a bottle neck width in 15 mm. The Gnellkoor, DAOKI and 3DMaterials listings state no neck width, so check the funnel against your bottle before ordering. For the printers behind these filters, the resin based filter hub is the starting point, and our 3D printing resins picks cover what goes in the bottle.
Cleaning and reuse
Steel funnels clean with a wipe and a wash. The Gnellkoor listing says to wipe with a paper towel, then wash with isopropyl alcohol, alcohol or soap water with the cleaning brush. The Sovol listing says to wipe the strainers out after use and clean them with isopropanol. The ELEGOO listing says only that the funnel is easy to clean and reusable, with no method stated. Disposable strainers need no cleaning at all: use one, then throw it away.
The Gnellkoor listing states the rule plainly: wear gloves during filtration and cleaning, avoid direct skin contact with resin, and never reuse a funnel that filtered resin for food filtration. Keep resin work away from food and drink. See our UV resin gloves picks for gloves sized for resin work.
Project Match
- Resin printing with SLA/DLP/LCD resin: the Gnellkoor, ELEGOO or Sovol steel funnels, all three listings name those resin types.
- Filtering paint or varnish for a spray gun: the ELEGOO or Sovol strainers, or the DAOKI kit, all three listings name paints and varnishes.
- High-volume filtering with disposables: the DAOKI or 3DMaterials packs, each with 100 strainers.
- Cleaning a resin vat without scratching the FEP film: the DAOKI clean tool, stated for resin removal without scratching the FEP film.
- Stated bottle neck fit: the ELEGOO for necks more than 16 mm wide, the Sovol for a 15 mm neck.
How the scores add up
Each filter is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For a resin filter, safety means a stated safety warning or safety-relevant material claim on the listing; only the Gnellkoor listing states one. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Gnellkoor Steel Funnel | 9.6 | 30 | 21 | 20 | 5 | 0 |
| ELEGOO Steel Funnel | 9.5 | 30 | 21 | 21 | 0 | 0 |
| Sovol Double-Strainer | 9.5 | 29 | 21 | 20 | 0 | 0 |
| DAOKI Paper Strainers | 9.4 | 28 | 20 | 21 | 0 | 0 |
| 3DMaterials Filter | 9.4 | 28 | 20 | 19 | 0 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
What micron filter do I need for 3D printer resin?
The DAOKI strainers state a 100 micron filter, and the 3DMaterials strainers state a 125 micron opening. The three steel funnels state no micron size, so pick a disposable pack if the mesh size matters to you.
Can I reuse a stainless steel resin funnel?
Yes. The Gnellkoor, ELEGOO and Sovol funnels are stainless steel and reusable. The Gnellkoor listing says to wipe with a paper towel, then wash with isopropyl alcohol, alcohol or soap water with the cleaning brush.
What bottle neck width fits these funnels?
The ELEGOO fits bottle necks more than 16 mm wide, and the Sovol fits a 15 mm neck. The other three listings state no neck width.
Can I use a resin filter funnel for food?
No. The Gnellkoor listing warns not to use a funnel that filtered resin for other food filtration, and to wear gloves during filtration and cleaning.
Do disposable resin strainers need a funnel?
The 3DMaterials strainers ship without a funnel, so a funnel must come from elsewhere. The DAOKI kit includes a collapsible silicone funnel, a hook and a clean tool with its 100 strainers.
Related: the resin 3D printer hub, 3D printer accessories, and the FEP film picks. Also see our best UV resin gloves. Also see our best tools to clean up 3D prints. Also see our SLA vs DLP 3D printer. Also see our carbon filter vs HEPA for 3D printer.




