Best Heat Press Inserts (2026): 4 Kits Compared
Four brass heat-set insert kits for 3D printing, compared by size range, piece count, knurling, lead-free brass and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFFVRVSS 600-Piece Kit9.7/10View on Amazon - 2
Longest WarrantyKadrick 520-Piece Kit9.5/10View on Amazon - 3
Best Assortment Boxruthex 270-Piece Box9.5/10View on Amazon - 4
Best 400-Piece KitKtehloy 400-Piece Kit9.5/10View on Amazon
A printed part with a screw hole that strips after a few uses is a part that needs a thread that lasts. A brass insert, pressed in hot with a soldering iron, gives the part a metal thread that holds up to repeated assembly. The best heat press inserts for that job are heat-set threaded inserts in the sizes your parts use, with knurling that grips the plastic and a case that keeps sizes apart. We compared four brass kits by size range, piece count, knurling, lead-free brass and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall FFVRVSS 600-Piece Kit: 600 inserts in M2 to M6, 6 tips and 1 adapter, lead-free brass Check price on Amazon
- Longest Warranty Kadrick 520-Piece Kit: 520 inserts in M2 to M5, heights 3 to 12 mm, 24-month warranty stated Check price on Amazon
- Best Assortment Box ruthex 270-Piece Box: 270 inserts in M2 to M5, lead free, per-size counts in a box Check price on Amazon
- Best 400-Piece Kit Ktehloy 400-Piece Kit: 400 inserts in M2 to M6, 45-degree knurling, heat or ultrasonic install Check price on Amazon
Machines on the list

FFVRVSS 600+7Pcs Brass Threaded Inserts M2 M2.5 M3
A 600-piece lead-free brass kit in M2 to M6 with 6 heat-set tips, 1 soldering iron adapter and a labeled case.
Pros
- 600 inserts across M2, M2.5, M3, M4, M5 and M6
- 6 heat-set tips and 1 soldering iron adapter included
- Lead-free brass withstands above 300°C / 572°F
- Labeled case keeps each size in its own compartment
Cons
- No warranty term is stated
- Soldering iron is not included
- No per-size piece counts are listed
- The kit covers six sizes, so a single-size job still buys the full set

KADRICK M2-M5 Heat Set Insert Kit,520PCS Thread
A 520-piece brass kit in M2 to M5 with heights from 3 to 12 mm, labeled compartments and a 24-month warranty.
Pros
- 520 inserts across M2, M3, M4 and M5
- Heights range from 3 mm to 12 mm
- Each size has its own labeled compartment
- 24-month after-sales warranty service is stated
Cons
- No M2.5 or M6 size is listed
- No soldering iron tips are included
- No per-size piece counts are listed
- No heat resistance figure is stated

ruthex Threaded Inserts M2 + M3 + M4 + M5
A 270-piece lead free brass box in M2 to M5 with per-size counts, a guide and reusable inserts.
Pros
- Per-size counts are listed: 70 M2, 100 M3, 50 M4 and 50 M5
- Lead free brass with a practical assortment box
- Inserts can be removed and reused
- Installs by heat or ultrasound into blind or through holes
Cons
- No warranty term is stated
- No M2.5 or M6 size is listed
- No heat-set tips are included
- No heat resistance figure is stated

Ktehloy 400Pcs Metric Heat Set Insert
A 400-piece brass kit in M2 to M6 with 45-degree knurling and a guide, for heat or ultrasonic install.
Pros
- 400 inserts across M2, M2.5, M3, M4, M5 and M6
- 45-degree knurling adds torque resistance and tensile strength
- Installs by heat or ultrasound, or during molding
- Brass withstands above 300°C / 572°F
Cons
- No warranty term is stated
- No tips, adapter or case is listed
- No lead-free claim is stated
- No per-size piece counts are listed
Other machines to compare
100Pcs #10-24 * 5 * 7.1 Threaded InsertsCheck price on Amazon
KUJIETOOL M3X5X4 Brass Heat-Set Threaded InsertsCheck price on Amazon
10 pcs Stainless Steel Threaded Insert D2.9 x L3.3 x M1.6 xCheck price on Amazon
Specs compared
| Insert Kit | HQ Score | Count | Sizes | Lead-free | Warranty |
|---|---|---|---|---|---|
| FFVRVSS 600-Piece Kit | 9.7/10 | 600 inserts | M2 to M6 | Stated | Not stated |
| Kadrick 520-Piece Kit | 9.5/10 | 520 inserts | M2 to M5 | Not stated | 24 months |
| ruthex 270-Piece Box | 9.5/10 | 270 inserts | M2 to M5 | Stated | Not stated |
| Ktehloy 400-Piece Kit | 9.5/10 | 400 inserts | M2 to M6 | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 3 November 2026. Counts are inserts per kit; tips and adapters are listed separately where included.
What the listings tell you, and what they leave out
We read four brass insert kits for this guide. All four list M2 to M5 sizes, and two of them add M2.5 and M6. Only one states a warranty term, and only two state lead-free brass. Only ruthex lists a per-size piece count: 70 M2, 100 M3, 50 M4 and 50 M5 pieces. Two list a heat resistance figure above 300°C, and the other two do not.
How to choose the best heat press inserts
Match the sizes to your parts
Sizes run from M2 to M6 across these kits. The FFVRVSS and Ktehloy kits cover M2, M2.5, M3, M4, M5 and M6, while the ruthex and Kadrick kits cover M2, M3, M4 and M5. Check the screws your parts use before you buy. If your parts use M2.5, only the FFVRVSS and Ktehloy kits list it.
Count pieces, then check what else is in the box
Counts run from 270 inserts in the ruthex box to 600 inserts in the FFVRVSS kit, with the Ktehloy kit at 400 and the Kadrick kit at 520. A bigger count suits a maker with many parts, while a smaller box suits a single project. Only the FFVRVSS kit lists heat-set tips and a soldering iron adapter in the box: 6 tips and 1 adapter. The other three list no tips, so check your own soldering iron tips before you start.
Knurling and the guide
All four kits list knurled brass inserts. Three of them list a guide that removes the need for countersinking: the FFVRVSS, Ktehloy and ruthex kits. The FFVRVSS and Ktehloy kits list 45-degree spiral or angled knurling, which the listings tie to torque resistance and pull-out strength. The ruthex kit lists opposing spiral knurling with a guide, and the Kadrick kit lists knurled threads that grip stronger than straight-thread inserts, per the maker. Press the insert in straight with a soldering iron, then let the plastic cool and harden around the sleeve before use.
Lead-free brass and heat
Two kits state lead-free brass: the FFVRVSS kit and the ruthex box. The Ktehloy and Kadrick kits list brass without a lead-free claim. Two kits state a heat resistance figure above 300°C: the FFVRVSS kit and the Ktehloy kit, both at above 300°C / 572°F. The ruthex and Kadrick kits list no heat resistance figure. A stated figure tells you the brass withstands that heat. If your shop also runs a press, see our best handheld heat press guide.
These inserts install hot: heat with a soldering iron and press in, then let the plastic cool and harden around the sleeve before handling the part. Work where air moves.
Project Match
- Electronics housings and laptop shells: the FFVRVSS kit, with M2 to M6 sizes and tips.
- Parts that need repeated assembly: the ruthex box, with reusable inserts in M2 to M5.
- Automotive casings and furniture parts: the Ktehloy kit, with 400 inserts in M2 to M6.
- Parts in M2 to M5 with a stated warranty: the Kadrick kit, with a 24-month warranty.
How the scores add up
Each kit is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. For an insert kit, safety means lead-free brass where the listing states it; the FFVRVSS and ruthex kits state lead-free brass, and the other two do not. Only the Kadrick kit states a warranty term, at 24 months.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| FFVRVSS 600-Piece Kit | 9.7 | 32 | 22 | 21 | 7 | 0 |
| Kadrick 520-Piece Kit | 9.5 | 29 | 20 | 21 | 0 | 3 |
| ruthex 270-Piece Box | 9.5 | 28 | 21 | 20 | 5 | 0 |
| Ktehloy 400-Piece Kit | 9.5 | 30 | 21 | 21 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What sizes do these heat-set inserts come in?
The FFVRVSS and Ktehloy kits cover M2, M2.5, M3, M4, M5 and M6, while the ruthex and Kadrick kits cover M2, M3, M4 and M5. The Kadrick kit lists heights from 3 mm to 12 mm, and the ruthex box lists RX-M2x4, RX-M3x5.7, RX-M4x8.1 and RX-M5x9.5 inserts.
How do you install a heat-set insert?
Heat the insert with a soldering iron and press it into the hole in the plastic part, then let the plastic cool and harden around the sleeve. The FFVRVSS kit includes 6 heat-set tips and 1 soldering iron adapter, and the Ktehloy and ruthex kits also list ultrasonic install.
Which plastics work with brass heat-set inserts?
Three of the four kits list PLA, PETG, ABS, PPS and PP: the FFVRVSS, Ktehloy and ruthex kits. The FFVRVSS kit also lists TPU, and the Kadrick kit lists no specific plastics. Check your part material against the listing first.
Do any of these kits include heat-set tips?
Only the FFVRVSS kit lists tips in the box: 6 heat-set tips in M2 to M6 and 1 soldering iron adapter. The other three kits list no tips.
What is the difference between knurled and straight-thread inserts?
Knurled inserts have angled ridges that grip the plastic as it cools. The FFVRVSS and Ktehloy listings tie 45-degree knurling to torque resistance and pull-out strength, and the Kadrick listing says its knurled threads grip stronger than straight-thread inserts.
Related: the craft machines hub, heat presses and sublimation, and the 3D printers hub. Also see our best heat press vinyl transfers. Also see our best 3D printer unclogging tool.




