Best Grease for 3D Printer Z Axis Under 10 (2026)
5 greases for 3D printer Z-axis lead screws, from official Creality paste to a Bambu Lab listed 10g tube pack, compared by pack, size and fit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCreality Official Lube9.5/10View on Amazon - 2
Best High ViscosityCreality Grease 2-Pack9.5/10View on Amazon - 3
Best for Bambu LabMTLEE 10g 2-Pack9.5/10View on Amazon - 4
Best 4-PackRealth 10g 4-Pack9.5/10View on Amazon
A tall print that shifts a layer halfway up, or a Z screw that squeaks on the way down, often comes back to a dry lead screw. A dab of grease on the Z axis keeps the screw turning smooth and quiet, and the best grease for 3D printer Z axis under 10 is a paste that stays where it is put, quiets the motion and suits the parts on the machine. This guide compares greases by pack, size, form and the parts each listing names, using only what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Creality Official Lube: Official Creality paste in a 2-pack, colorless and odorless, with Z-axis lead screws and guide rails listed. Check price on Amazon
- Best High Viscosity Creality Grease 2-Pack: High viscosity paste in a 2-pack that stays where applied, for lead screws, rails and bearings. Check price on Amazon
- Best for Bambu Lab MTLEE 10g 2-Pack: 2 tubes of 10g with Bambu Lab X1C, A1, A1 Mini, P1S, P1P, K1 and K1 Max listed. Check price on Amazon
- Best 4-Pack Realth 10g 4-Pack: 4 tubes of 10g for lead screws and linear rails, for FDM printers. Check price on Amazon
Machines on the list

Creality Official Lubricant Grease
Official Creality lubricant grease in a 2-pack, a colorless and odorless paste for Z-axis lead screws, guide rails and linear rods.
Pros
- Official Creality grease, made for 3D printers
- Paste form that adheres and is not easy to dry or flow
- Colorless, odorless and non-toxic, per the listing
- Meets certified environmental standards, per the listing
Cons
- No warranty term is stated
- No safety listing is stated
- No size is stated
- No applicator is listed

Creality 3D Printer Lubricant Grease, Non-Toxic
Creality lubricant grease in a 2-pack, a high viscosity paste for linear rods, lead screws and Z-axis lead screws.
Pros
- High viscosity paste that stays where applied
- Noise reducing and anti-wear, per the listing
- Non-toxic and odorless, per the listing
- Protects against dust and rust, per the listing
Cons
- No warranty term is stated
- No safety listing is stated
- No size is stated
- No weight is stated

MTLEE 2 Pcs Grease Oil Compatible with Bambu Lab
MTLEE grease in 2 tubes of 10g, listed for Bambu Lab X1C, A1, A1 Mini, P1S, P1P, K1 and K1 Max.
Pros
- Lists Bambu Lab X1C, A1, A1 Mini, P1S, P1P, K1 and K1 Max
- 2 tubes of 10g with a tube design for easy application
- Non-toxic and odorless, per the listing
- Noise and friction reduction stated
Cons
- No warranty term is stated
- No safety listing is stated
- Only Bambu Lab models are listed for compatibility
- No weight is stated

3D Printer Grease Lubricant for Lead Screw
Realth grease in a 4-pack of 10g tubes, made for FDM lead screws, linear rails and Z-axis screws.
Pros
- 4-pack of 10g, the most tubes here
- Made for FDM 3D printers, per the listing
- Z-axis screws named among the parts
- Long-lasting lubrication stated, unlike thin oils
Cons
- No warranty term is stated
- No safety listing is stated
- No non-toxic claim is stated
- No odor claim is stated

3D Printer Grease Lubricant
EzyAce grease in a 2-pack, a low odor paste for gears, guide rails and lead screws on FDM printers.
Pros
- Low odor formula stated
- Paste stays where applied for better control
- Suits gears, guide rails, lead screws and bearings
- Made for routine maintenance of most FDM printers
Cons
- No warranty term is stated
- No safety listing is stated
- No size is stated
- No Z-axis use is stated by name
Other machines to compare
Creality Thermal GreaseCheck price on Amazon
Creality High-Temperature Thermal GreaseCheck price on Amazon
Specs compared
| Model | HQ Score | Pack | Size | Form | Z-axis listed | Non-toxic | Warranty |
|---|---|---|---|---|---|---|---|
| Creality Official Lube | 9.5/10 | 2 pack | Not stated | Paste | Yes | Yes | Not stated |
| Creality Grease 2-Pack | 9.5/10 | 2 pack | Not stated | Paste | Yes | Yes | Not stated |
| MTLEE 10g 2-Pack | 9.5/10 | 2 pack | 10g tubes | Paste, tube | Yes | Yes | Not stated |
| Realth 10g 4-Pack | 9.5/10 | 4 pack | 10g | Paste | Yes | Not stated | Not stated |
| EzyAce Grease 2-Pack | 9.4/10 | 2 pack | Not stated | Paste | Not stated | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026. Where a listing contradicts itself, both figures are shown.
How the picks were scored
Each grease is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Creality Official Lube | 9.5 | 32 | 22 | 21 | 0 | 0 |
| Creality Grease 2-Pack | 9.5 | 30 | 21 | 21 | 0 | 0 |
| MTLEE 10g 2-Pack | 9.5 | 30 | 21 | 20 | 0 | 0 |
| Realth 10g 4-Pack | 9.5 | 29 | 21 | 20 | 0 | 0 |
| EzyAce Grease 2-Pack | 9.4 | 28 | 20 | 20 | 0 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
What the listings tell you
5 grease listings were read for this guide. 4 of the 5 name Z-axis lead screws, and all 5 name lead screws, guide rails or linear rods. 2 of the 5 state a 10g size, and 1 states a 4-pack. None of the 5 states a warranty term or a safety listing.
Buying guide: the best grease for 3D printer Z axis under 10 for your printer
Paste that stays put
All 5 picks are a paste, not a thin oil. The Creality listings state a high viscosity formula that stays where applied, and the EzyAce listing states a paste that adheres firmly without drying or flowing. The Realth listing states its grease outlasts thin oils, which evaporate or need frequent application.
Pack size: 2-pack or 4-pack
4 of the 5 picks come in a 2-pack, and the Realth pick comes in a 4-pack. A 4-pack suits a maker with more than one printer to maintain, while a 2-pack suits a single machine.
Size: 10g tubes
2 of the 5 picks state a 10g size: the Realth 4-pack and the MTLEE 2-pack, both in tubes. The Creality picks and the EzyAce pick state no size, so the pack count is the only guide to how much grease is in the box.
Z-axis lead screws
4 of the 5 picks name Z-axis lead screws or Z-axis screws. The EzyAce pick names lead screws without the Z-axis label, so the Z-axis fit is stated for 4 picks and not for 1.
Non-toxic and odorless
The Creality picks and the MTLEE pick state non-toxic and odorless. The EzyAce pick states a low odor formula, and the Realth pick states neither a non-toxic claim nor an odor claim. The Creality Official pick also states it meets certified environmental standards.
Bambu Lab compatibility
Only the MTLEE listing names printer models: Bambu Lab X1C, A1, A1 Mini, P1S, P1P, K1 and K1 Max. The Creality picks state wide compatibility with all 3D printers, and the Realth and EzyAce picks name FDM printers.
Project Match
- Z-axis lead screws: 4 of the 5 picks name them, including both Creality packs, the Realth 4-pack and the MTLEE tubes.
- Bambu Lab machines: only the MTLEE listing names X1C, A1, A1 Mini, P1S, P1P, K1 and K1 Max.
- FDM printers: the Realth and EzyAce listings name FDM printers, and the Creality listings name all 3D printers.
- Gears and rails: all 5 picks list gears, guide rails or linear rods among the parts they suit.
- Quiet running: the Creality picks and the MTLEE listing state noise reduction, and the Realth listing states reduced friction and noise.
FAQ: lasers and CNC
What grease goes on a 3D printer Z axis?
Lead screw grease in paste form. 4 of the 5 picks name Z-axis lead screws or Z-axis screws among the parts they suit, and all 5 are pastes.
Can I use the same grease on rails and lead screws?
All 5 listings name rails, rods or lead screws among the parts they suit, so one paste covers both jobs on the picks here. Check the parts list on the listing for the machine you own.
Does printer grease dry out?
The Creality Official listing states its paste is not easy to dry or flow, and adheres tightly to the surface. The Realth listing states its grease outlasts thin oils, which evaporate or need frequent application.
Is 3D printer grease non-toxic?
The Creality picks and the MTLEE pick state non-toxic, and the EzyAce pick states a low odor formula. The Realth pick states neither a non-toxic claim nor an odor claim.
How much grease comes in a pack?
4 of the 5 picks come in a 2-pack, and the Realth pick comes in a 4-pack. A 10g tube size is stated for the Realth and MTLEE picks, and no size is stated for the other 3.
Related: 3D printer maintenance, 3D printer filament types, ball screw vs lead screw CNC and the 3D printer hub. Also see our 3D printer nozzle size.




