Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best 3D Printer Lubricant and Grease Kit (2026)

4 lubricant and grease kits for FDM printers compared by oil, grease, cleaning tools, kit size and warranty for Bambu Lab printers.

Best 3D Printer Lubricant and Grease Kit (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Intarsio TK011Best OverallIntarsio TK0119.6/10View on Amazon
  2. 2TuTune PSLO6KBest 56-Piece KitTuTune PSLO6K9.5/10View on Amazon
  3. 3SIKEZHAN Lube KitBest Oil and Grease PairSIKEZHAN Lube Kit9.4/10View on Amazon
  4. 4Moxikison 16PCSBest Grease Value PackMoxikison 16PCS9.4/10View on Amazon

A printer that squeaks on every travel move or leaves layer lines across a print is asking for maintenance, and the best 3d printer lubricant and grease kit puts oil and grease where the rails, screws and gears need them. The kits below cover full tool cases, pen sets, oil-and-grease pairs and grease-only value packs, and each one is compared on what it lubricates, what it cleans and what warranty it states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Intarsio TK011: 113-piece kit with oil, 20ml grease and thermal paste, 1-year warranty Check price on Amazon
  • Best 56-Piece Kit TuTune PSLO6K: 3 oil pens, 3 grease tubes and 50 wipes Check price on Amazon
  • Best Oil and Grease Pair SIKEZHAN Lube Kit: 2 oil sticks for XY rails, 2 grease syringes for Z screws Check price on Amazon
  • Best Grease Value Pack Moxikison 16PCS: 6 10g grease tubes and 10 cleaning ropes Check price on Amazon

Machines on the list

113Pcs 3D Printer Tool Kit and Accessories

113Pcs 3D Printer Tool Kit and Accessories

Intarsio9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

113-piece tool kit with lubricating oil, 20ml grease, thermal paste and nozzle coating for FDM and SLA printers.

Pros

  • 113-piece kit covers removal, finishing and maintenance
  • Oil for XY rails and 20ml grease for Z screws and gears
  • Thermal paste at 10-12 W/m·K for the hotend
  • 1-year warranty stated

Cons

  • Lubricant is one part of a large kit, not a dedicated lube set
  • Oil tube size is not stated
  • No cleaning ropes or wipes are stated
  • Kit weight is not stated
3D Printer Lubrication Kit

3D Printer Lubrication Kit

TuTune9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

56-piece pen-style kit with 3 oil pens, 3 grease tubes and 50 wipes for lead screws and rails.

Pros

  • 3 oil pens and 3 grease tubes in the pen set
  • 50 lint-free wipes included
  • Two configurations: pen set and bottle set
  • PTFE-infused oil for lead screws, rails and bearings

Cons

  • No warranty term is stated
  • Bottle-style set is 53 pieces, not 56
  • Oil pen size is not stated
  • Grease tube size is not stated
SIKEZHAN 3D Printer Lubrication Kit

SIKEZHAN 3D Printer Lubrication Kit

SIKEZHAN9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Lubrication kit with 2 oil sticks for XY rails and 2 grease syringes for Z-axis lead screws.

Pros

  • Separate oil sticks for XY rails and grease syringes for Z screws
  • Brush tips on the oil sticks for a thin, even layer
  • Needle tips place grease in narrow areas
  • Oil and grease kept separate for their own axes

Cons

  • No warranty term is stated
  • No cleaning wipes or ropes are included
  • No oil or grease quantities are stated
  • Small kit: 2 oil sticks and 2 grease syringes only
3D Printer Grease & Cleaning Kit

3D Printer Grease & Cleaning Kit

Moxikison9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

6-pack of 10g grease tubes with 10 cleaning ropes for lead screws, gears and moving parts.

Pros

  • 6 10g grease tubes, 60g total, for repeated maintenance
  • 10 cleaning ropes for removing old grease first
  • Precision nozzle on each tube for controlled application
  • Compatible with Bambu Lab, Creality Ender and Anycubic

Cons

  • No warranty term is stated
  • Grease only; no oil for XY rails
  • No wipes are included
  • No needle tips for narrow areas are stated

Other machines to compare

Specs compared

Kit HQ Score Oil Grease Extras Warranty
Intarsio TK011 9.6/10 Oil tube 20ml grease tube Thermal paste, nozzle coating 1 year
TuTune PSLO6K 9.5/10 3 oil pens 3 grease tubes 50 wipes Not stated
SIKEZHAN Lube Kit 9.4/10 2 oil sticks 2 grease syringes 2 plungers, 2 needle tips Not stated
Moxikison 16PCS 9.4/10 Not stated 6 10g tubes 10 cleaning ropes Not stated

Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026.

Buying guide: best 3d printer lubricant and grease kit

Oil for rails, grease for screws

Oil and grease have different jobs on a printer. The SIKEZHAN kit keeps them separate: oil sticks for XY-axis linear rails and guide rods, and grease syringes for Z-axis lead screws and compatible bearing areas, with a note that the two lubricants should not be used interchangeably. The Intarsio kit follows the same split, with a lubricating oil tube for X-Y axis linear rails and bearings and a 20ml grease tube for Z-axis lead screws and extruder gears. The TuTune kit pairs PTFE-infused oil pens with grease tubes, and the listing says non-drying grease suits gears and high-load parts while the oil penetrates to reduce friction and noise. The Moxikison kit is grease only, for lead screws, gears, threaded rods and other grease-compatible moving parts. Always follow your printer manufacturer’s lubrication instructions, as the Moxikison and SIKEZHAN listings state.

Clean first, then lubricate

Fresh grease works best on a clean surface. The Moxikison kit pairs its 6 grease tubes with 10 cleaning ropes that remove old grease, dust and debris from lead screws, threaded rods and grooves before fresh grease goes on. The TuTune kits include 50 lint-free wipes for the same job, and the Intarsio kit adds an 8ml brush-on nozzle coating and a 20mm open-end spanner for hotend care. For more on cleaning the hotend, see the best 3D printer nozzle cleaning kit guide and the best tool for cleaning filament tubes guide.

Kit size and the full tool case

Kit size runs from the SIKEZHAN pair of oil sticks and grease syringes to the Moxikison 16-piece grease and rope kit, the TuTune 56-piece pen set and the Intarsio 113-piece tool kit. The Intarsio case holds scrapers, pliers, files, a deburring tool, a 48-in-1 screwdriver set and the maintenance items, so it suits a maker who wants one case for removal, finishing and maintenance. The TuTune pen set suits clean, controlled application, while the bottle set suits fast work across printers. For a wider look at printer tool cases, see the best 3D printer accessory kit guide.

Compatibility: Bambu Lab, Creality, Anycubic, Prusa

All 4 kits list Bambu Lab printers. The Intarsio kit lists Bambu Lab X1C, P1S and A1, plus FLASH FORGE and FDM and resin printers. The Moxikison kit lists Bambu Lab X1, P1 and A1 series, Creality Ender series and Anycubic Kobra series. The SIKEZHAN kit lists Bambu Lab A1, A1 Mini, P1S, P1P and X1 series, plus Creality and Prusa machines. The TuTune kit lists Bambu printers. Check the listing against your own printer model before buying, and follow your printer manufacturer’s lubrication instructions.

Safety

Follow your printer manufacturer’s lubrication instructions before applying oil or grease. Use the oil sticks on XY rails and the grease syringes on Z-axis lead screws, as the SIKEZHAN listing states, and keep the two lubricants separate.

Project Match

  • Routine rail and screw maintenance: SIKEZHAN oil sticks and grease syringes, or the TuTune pen set with 3 oil pens and 3 grease tubes.
  • Print farm maintenance: Moxikison 6-pack with 60g of grease and 10 cleaning ropes for repeated jobs.
  • Full workshop in one case: Intarsio 113-piece kit with tools, oil, grease and thermal paste.
  • Hotend care: Intarsio 8ml brush-on nozzle coating and thermal paste at 10-12 W/m·K.

How the scores add up

Each kit is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Intarsio TK011 9.6 32 21 21 0 2
TuTune PSLO6K 9.5 30 20 20 0 0
SIKEZHAN Lube Kit 9.4 29 20 19 0 0
Moxikison 16PCS 9.4 28 19 20 0 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.

FAQ: lasers and CNC

Should I use oil or grease on a 3D printer?

Use oil on XY-axis linear rails and guide rods, and grease on Z-axis lead screws, gears and bearings. The SIKEZHAN and Intarsio kits split the two lubricants that way, and the SIKEZHAN listing says they should not be used interchangeably.

Do I clean the rails before lubricating?

Yes. The Moxikison kit uses cleaning ropes to remove old grease, dust and debris from lead screws and grooves before fresh grease goes on. The TuTune kits include 50 lint-free wipes for the same job.

How much grease comes in these kits?

The Moxikison kit holds 60g of grease in 6 10g tubes. The Intarsio kit holds a 20ml grease tube. The TuTune pen set holds 3 grease tubes and the SIKEZHAN kit holds 2 grease syringes, with no size stated for either.

Do these kits fit Bambu Lab printers?

Yes. All 4 kits list Bambu Lab printers, including the X1, P1 and A1 series across the listings. The Moxikison kit also lists Creality Ender and Anycubic Kobra series, and the SIKEZHAN kit also lists Creality and Prusa machines.

Which kit has a warranty?

Only the Intarsio kit states a warranty term: all products are covered by a 1-year warranty. The Moxikison, SIKEZHAN and TuTune listings state no warranty term.

Related: best 3D printer nozzle cleaning kit, best tool for cleaning filament tubes, best 3D printer accessory kit and the 3D printer hub. Also see best isopropyl alcohol for 3D printing.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.