Best DTG Printer Moisturizing Solution (2026)
Four DTG printer moisturizing solutions compared by size, printhead fit, use and safety claims, for daily care and long downtime.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPrintium Care Solution9.6/10View on Amazon - 2
Best with WarrantyGEVANCY Moisturizing9.5/10View on Amazon - 3
Best Small BottleAulay Moisturizer9.5/10View on Amazon - 4
Best for DowntimeQUEENPRINT Moisturizer9.4/10View on Amazon
A shirt order waits on the printer, and the printer waits on the printhead. Leave a DTF or DTG printer idle over a weekend, and ink dries in the nozzles, clogs form, and the first print back comes out streaked. The best dtg printer moisturizing solution keeps those nozzles wet during downtime, so the printer starts clean after a break, and this guide compares four fluids on size, printhead fit, use and safety claims.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Printium Care Solution: A 33.8 fl oz bottle for capping stations, dampers and ink lines, non-toxic and odorless, for all DTF and DTG systems. Check price on Amazon
- Best with Warranty GEVANCY Moisturizing: A 250ml fluid with a 1 year warranty for Epson F1080, L1800, R1390 and L805 printheads. Check price on Amazon
- Best Small Bottle Aulay Moisturizer: A 100ml fluid with safe, anti-corrosive ingredients for xTool, EPN and common Epson printheads. Check price on Amazon
- Best for Downtime QUEENPRINT Moisturizer: A 100ml wet capping fluid for weekend and holiday downtime, made to stop white ink clogs. Check price on Amazon
Machines on the list

Printium DTF Printhead Care Solution 33.8 fl oz
A 33.8 fl oz bottle of printhead care solution for capping stations, dampers and ink lines, non-toxic and odorless, for all DTF and DTG systems.
Pros
- 33.8 fl oz (1000ml) bottle built for daily production use
- Non-toxic, odorless and residue-free, with a non-corrosive moisturizing formula
- Apply to capping station pads, dampers or ink lines with a syringe or dropper
- Fits I3200, XP600, TX800, L1800, 4720, DX5, DX7, I1600 and R1390 printheads
Cons
- No warranty term in the listing
- Not a cleaning solution: it prevents clogs, it does not remove them
- Large 1000ml bottle is sized for commercial studios and high-volume shops
- Bottle weighs 2.37 pounds, so it needs a steady shelf spot

GEVANCY DTF & DTG Printhead Moisturizing Solution
A 250ml printhead moisturizing solution with a 1 year warranty, made to keep Epson printhead nozzles moist during downtime and prevent ink drying and clogging.
Pros
- 1 year warranty, the only warranty term among the four fluids
- Keeps printhead nozzles moist during downtime, preventing ink drying and clogging
- Fits Epson F1080, L1800, R1390 and L805, plus L800 and other common DTF models
- Support team replies within 24 hours
Cons
- No safety features stated in the listing
- Bullets describe DTF use, while DTG appears only in the title

DTF Printhead Moisturizing Solution Liquid 100ml
A 100ml printhead moisturizing liquid with safe, anti-corrosive ingredients for xTool, EPN and common Epson printheads, applied in drops to the capping station or printhead surface.
Pros
- Safe, anti-corrosive ingredients for printhead protection
- Fits xTool Apparel printers, EPN printheads, DX5, DX7, XP600 and I3200
- Apply a few drops to the capping station or printhead surface before powering off
- 24/7 professional support
Cons
- No warranty term in the listing
- No weight or dimensions stated in the listing
- The listing promises a perfect, streak-free nozzle check, with no stated method
- 100ml is the smallest pack here

DTF Moisturizing Solution 100ml
A 100ml wet capping fluid for weekend and holiday downtime that keeps nozzles moist and stops white ink clogs, for L1800, XP600, i3200 and all DTF and DTG printers.
Pros
- Made for weekend and holiday downtime, when printers sit idle
- Helps prevent drying, clogging and ink blockage, including white ink clogs
- Works with most DTF printers and universal printheads
- Compact 100ml size for hobby users, small studios and light-volume printers
Cons
- No warranty term in the listing
- No safety features stated in the listing
- No weight stated in the listing
- No stated amount per application
Other machines to compare
DTF Printhead Care SolutionCheck price on Amazon
DTF Printhead Moisturizing Solution Liquid 500ml for xToolCheck price on Amazon
DTF Moisturizing Solution 500mlCheck price on Amazon
500ML DTF Printhead Moisturizing Solution Liquid for DTF &Check price on Amazon
DTG Pre-Treatment SolutionCheck price on Amazon
MagicPrint4U DTF Cleaning Solution 1000ml for Printhead WetCheck price on Amazon
Specs compared
| Model | HQ Score | Size | For | Use | Safety named | Warranty |
|---|---|---|---|---|---|---|
| Printium Care Solution | 9.6/10 | 33.8 fl oz (1000ml) | All DTF and DTG | Capping station, dampers, ink lines | Non-toxic, odorless, non-corrosive | Not stated |
| GEVANCY Moisturizing | 9.5/10 | 250ml | Epson F1080, L1800, R1390, L805 | Daily maintenance | Not stated | 1 Year |
| Aulay Moisturizer | 9.5/10 | 100ml | xTool, EPN, DX5, DX7, XP600, I3200 | Capping station, printhead | Safe, anti-corrosive | Not stated |
| QUEENPRINT Moisturizer | 9.4/10 | 100ml | L1800, XP600, i3200, all DTF and DTG | Cap station, nozzle area | Not stated | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 11 November 2026. Where a listing contradicts itself, both figures are shown.
What the listings tell you
Four moisturizing solution listings went into this guide. Only one stated a warranty term, a 1 year term on the GEVANCY fluid, and none stated a safety certification. Two listings left out basics: one 100ml fluid states no weight or dimensions, and one states no safety features at all. One listing disagrees with itself on size, with the title saying 500mL and the bullets and spec table saying 250ml. Read the title and the bullets, not just the spec table.
Buying guide: the best dtg printer moisturizing solution
Size: a bottle for a weekend, or a bottle for a shop
Sizes here run from 100ml bottles to a 33.8 fl oz bottle, and the GEVANCY listing gives two sizes at once, 500mL in the title and 250ml in the bullets and spec table. A 100ml bottle suits a hobby user, a small studio or a light-volume printer. The 33.8 fl oz bottle suits a commercial studio or a high-volume print shop that uses fluid daily. Pick the size by how often the printer runs, not by the bottle alone.
Printhead fit
Every fluid here names the printheads it fits, and those names are the check before buying. The Printium fluid fits I3200, XP600, TX800, L1800, 4720, DX5, DX7, I1600 and R1390 printheads, plus ET8550, XP15000, L800 and P800 systems. The GEVANCY fluid fits Epson F1080, L1800, R1390 and L805. The Aulay fluid fits xTool Apparel printers, EPN printheads and DX5, DX7, XP600 and I3200. The QUEENPRINT fluid fits L1800, XP600, i3200 and all DTF and DTG printers. Match the printhead first, then the size.
How the fluid is used
Moisturizing fluid is a daily maintenance fluid, not a cleaning solution: it keeps nozzles moist and prevents clogs from forming, while a cleaning solution removes clogs that are already there. Apply it to the capping station pads, dampers or ink lines with a syringe or dropper, or apply a few drops directly to the capping station or printhead surface before powering off. Use it daily, before shutdown, or for long-term storage, and keep the printer’s nozzles hydrated between print jobs.
Downtime: weekends, holidays and long breaks
Downtime is when ink dries. The fluids here are made for idle periods: overnight shutdowns, weekend breaks, holiday downtime and seasonal storage. The QUEENPRINT fluid is made for weekend and holiday downtime in particular, and the Printium fluid is made for use before long breaks, overnight shutdowns and seasonal storage. A fluid that stays in the capping station keeps the ink delivery system hydrated until the next print job.
Moisturizing fluid prevents clogs; it does not remove them, so a clogged printhead still needs a cleaning solution. Keep fluid in the capping station during downtime, and follow the printer maker’s own maintenance steps for the printhead. See DTF printer for beginners for the wider setup.
Project Match
- Daily production in a commercial studio: the Printium fluid, a 1000ml bottle for capping stations, dampers and ink lines.
- A DTF printer with a warranty behind the fluid: the GEVANCY solution, with a 1 year warranty.
- Daily shutdowns on a small printer: the Aulay fluid, a few drops on the capping station before powering off.
- Weekend and holiday downtime: the QUEENPRINT fluid, a wet capping fluid made for idle days.
How the scores add up
Each fluid is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Safety points come from stated formula features such as non-toxic, odorless or anti-corrosive, and warranty points come only from a stated warranty term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Printium Care Solution | 9.6 | 32 | 22 | 21 | 5 | 0 |
| GEVANCY Moisturizing | 9.5 | 29 | 21 | 20 | 0 | 3 |
| Aulay Moisturizer | 9.5 | 28 | 20 | 20 | 4 | 0 |
| QUEENPRINT Moisturizer | 9.4 | 27 | 20 | 20 | 0 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
What is a DTG printer moisturizing solution?
It is a maintenance fluid that keeps printhead nozzles moist during downtime, preventing ink drying and clogging. It is not a cleaning solution: it prevents clogs from forming, while a cleaning solution removes clogs that are already there.
How do you use printhead moisturizing solution?
Apply it to the capping station pads, dampers or ink lines with a syringe or dropper, or apply a few drops directly to the capping station or printhead surface before powering off. Use it daily, before shutdown, or for long-term storage.
Can moisturizing solution unclog a printhead?
No. The Printium listing states it plainly: the fluid is a daily maintenance and storage fluid, not a cleaning solution. It keeps ink systems hydrated and prevents clogs from forming. A clogged printhead needs a cleaning solution.
Which printheads do these fluids fit?
It depends on the fluid. The Printium fluid fits I3200, XP600, TX800, L1800, 4720, DX5, DX7, I1600 and R1390 printheads. The GEVANCY fluid fits Epson F1080, L1800, R1390 and L805. The Aulay fluid fits xTool Apparel printers and EPN printheads. Check the listing for the printhead before buying.
Related: the craft machines hub, DTF printer for beginners, heat press for beginners and embroidery machine vs DTG printer. Also see embroidery machine vs DTF printer. Also see best heat press vinyl transfers. Also see best white heat transfer vinyl. Also see best heat gun for crafts. Also see best craft knife.




