Best Glass Bottle Cutter (2026): 5 Picks for Glass Craft Projects
5 bottle cutter kits with support wheels, carbide heads and cutting oil, compared by base, bottle fit and finishing tools for glass craft projects.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGodora Bottle Cutter9.6/10View on Amazon - 2
Best for Repeatable LengthsCamdios Bottle Cutter9.6/10View on Amazon - 3
Best for Wide BottlesKalawen Bottle Cutter9.5/10View on Amazon - 4
Best for Long BottlesReonite Bottle Cutter9.5/10View on Amazon
A bottle that held wine or beer can become a vase, a candle holder or a lamp, but only if the cut runs clean around the glass. A glass bottle cutter scores a line around the bottle so the top lifts away, and this guide compares the best glass bottle cutter kits for that job, from wheels and cutting heads to base, bottle fit and kit contents.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you.
Quick picks
- Best Overall Godora Bottle Cutter: 3 carbide heads for 3-6 mm and 6-12 mm glass, cutting oil and a dropper, and a steel backstop on a wooden base. Check price on Amazon
- Best for Repeatable Lengths Camdios Bottle Cutter: 2 marked scales and a reinforced backstop for repeatable cut lengths, with 2 extra heads and cutting oil in the kit. Check price on Amazon
- Best for Wide Bottles Kalawen Bottle Cutter: Adjustable width from 3.1 to 11 in, 5 support wheels and a stainless steel base. Check price on Amazon
- Best for Long Bottles Reonite Bottle Cutter: A position block for bottles up to 18 in long, with a spare blade and 6 rubber rings in the kit. Check price on Amazon
Machines on the list

Glass Bottle Cutter Kit, Glass Cutter for Bottles
A wooden-base bottle cutter kit with 3 carbide heads for 3-6 mm and 6-12 mm glass, cutting oil and a dropper, a steel backstop and a handheld glass cutter.
Pros
- 3 carbide heads: a pre-installed general head plus extras for 3-6 mm and 6-12 mm glass
- Cutting oil and a dropper included in the kit
- Steel backstop with 3 screws and non-slip pads for a steady base
- Handheld glass cutter, glass drill bit and cut-resistant gloves in the kit
Cons
- Made for round wine, beer and liquor bottles; check size and wall thickness before ordering
- No warranty term is stated
- Oil, sandpaper and rubber rings are consumables to replace with use
- The wooden base and steel backstop need more bench space than a handheld cutter

Camdios Glass Bottle Cutter with Cutting Oil
A scale-guided wooden-base kit with 2 extra cutting heads for 3-6 mm and 6-12 mm glass, cutting oil, a dropper, a reinforced backstop and a handheld cutter.
Pros
- 2 marked scales help plan repeatable cut lengths
- 2 extra heads for 3-6 mm and 6-12 mm glass
- Cutting oil and a dropper included in the kit
- Handheld cutter included for the flat sides of suitable square bottles
Cons
- The round-bottle cutter needs the handheld cutter for square bottles
- No warranty term is stated
- 3 sandpapers and 4 rubber rings are consumables to replace with use
- The wooden base measures 12.6 x 5.6 x 2.9 in, so it needs bench space

Glass Bottle Cutter, Upgrade Bottle Cutter & Glass
A 5-wheel bottle cutter with a stainless steel base, adjustable width from 3.1 to 11 in, a spare blade and an e-book and video tutorials.
Pros
- 5 support wheels steady the bottle for a precise cut
- Adjustable width from 3.1 to 11 in fits beer, liquor, whiskey and champagne bottles
- Spare blade included; the maker rates the blade at more than 400,000 cuts
- E-book and video tutorials included for beginners
Cons
- No cutting oil listed in the kit
- For round and oval bottles only
- The 400,000-cut figure is the maker's claim, with no detail on how it was counted
- 2 sandpaper sheets and 1 cleaning sponge are consumables to replace with use

Reonite 16 PCS Upgraded Glass Bottle Cutter Kit
A 16-piece bottle cutter kit with 5 support wheels, a tungsten carbide wheel, a spare blade and a position block for bottles up to 18 in long.
Pros
- 5 support wheels keep the bottle steady while it turns
- Tungsten carbide cutting wheel with a spare blade included
- Position block fits bottles up to 18 in long
- 16-piece kit with 6 rubber rings, 2 sandpaper sheets, brush, hemp rope, gloves and a glass drill bit
Cons
- No cutting oil listed in the kit
- Only 2 sandpaper sheets in the kit
- The base measures 12.5 x 5.6 x 2.7 in, so it needs bench space
- Made for round bottles; tapered or square bottles are not a fit

Glass Bottle Cutter Kit, Bottle Cutter for Round
A stainless steel base kit with 5 support wheels, 2 carbide blades and 6 adjustment points, for round bottles from 1.7 to 7 in in diameter.
Pros
- 5 support wheels and 6 adjustment points for bottles from 1.7 to 7 in in diameter
- 2 carbide blades, including a spare, in the kit
- Glass drill bit, screwdriver, wrench and oil dropper in the kit
- Clear method in the listing: score once, separate with hot and cold water, then wet sand
Cons
- Cutting oil is not included; a dedicated glass cutting oil is sold separately
- For round bottles only; not for square, rectangular or tapered bottles
- 6 rubber rings and 2 sandpaper sheets are consumables to replace with use
- The 2 spare screws and position block are small parts to keep track of
Other machines to compare
Electric Bottle CutterCheck price on Amazon
Deruilong Electric Bottle CutterCheck price on Amazon
Red Devil 106370 DIY Glass CutterCheck price on Amazon
Toyo Custom-Grip SupercutterCheck price on Amazon
Twotrees TTS-20 Max 20000mW Laser Engraver and Cutter MachineCheck price on Amazon
Specs compared
| Model | Base | Bottle fit | Cutting heads | Oil included | Kit extras |
|---|---|---|---|---|---|
| Godora Bottle Cutter | Wooden base, steel backstop | Round wine, beer and liquor bottles | Pre-installed general head plus 2 extra heads for 3-6 mm and 6-12 mm glass | Included, with dropper | Handheld cutter, glass drill bit, 3 sandpaper sheets, 4 rubber rings, cut-resistant gloves |
| Camdios Bottle Cutter | Wooden base, steel backstop | Round bottles; handheld cutter for square bottles | 2 extra heads for 3-6 mm and 6-12 mm glass | Included, with dropper | Handheld cutter, 3 sandpapers, 4 rubber rings, 2 spare base pads |
| Kalawen Bottle Cutter | Stainless steel base | Round and oval bottles, 3.1 to 11 in wide | Spare blade included | Not stated | Glass cutter, 6 rubber rings, 2 sandpaper, sponge, gloves, glass drill bit |
| Reonite Bottle Cutter | Stainless steel base | Round bottles, up to 18 in long | Spare blade included | Not stated | 6 rubber rings, 2 sandpaper sheets, brush, hemp rope, gloves, glass drill bit |
| Glass Bottle Cutter Kit | Stainless steel base | Round bottles, 1.7 to 7 in in diameter | 2 carbide blades | Not included | 6 rubber rings, 2 sandpaper sheets, sponge, gloves, glass drill bit |
Size and performance figures are the brand’s ratings quoted from listings on 14 November 2026. Base is the base each kit uses, and bottle fit is the bottle shape and size each listing states.
What the listings tell you, and what they leave out
This guide compares 5 listings. 2 of the 5 kits include cutting oil with a dropper, and 3 of the 5 kits use a stainless steel base while 2 use a wooden base with a steel backstop. None of the 5 listings states a warranty term, so warranty scores nothing across the guide.
The listings are strongest on kit contents: every kit names its wheels or heads, its base and its finishing tools. They are thinnest on safety: gloves appear in each kit, but no listing states a laser class or a safety certification, which fits a hand tool with no power source. Wall limits beyond the head ranges the Godora and Camdios kits state are left out, so check size and wall thickness before ordering.
How to choose the best glass bottle cutter
Support wheels and a steady base
3 of the 5 kits use 5 support wheels to cradle the bottle while it turns, each paired with a stainless steel base. The other 2 kits use a wooden base with a thickened steel backstop held by 3 screws and non-slip pads. Either layout works when the bottle sits level and turns without wobble, so match the base to the bench space the kit needs.
Cutting heads and glass thickness
The Godora kit includes a pre-installed general head plus 2 extra heads for 3-6 mm and 6-12 mm glass, and the Camdios kit includes 2 extra heads for the same 3-6 mm and 6-12 mm ranges. The other 3 kits ship a spare blade in the box. Match the head to wall thickness: 3-6 mm heads suit thinner walls, 6-12 mm heads suit thicker walls, and cutting oil on the wheel supports a controlled score.
Bottle fit: diameter, length and shape
The Glass Bottle Cutter Kit fits round bottles from 1.7 to 7 in in diameter, the Kalawen cutter adjusts from 3.1 to 11 in wide, and the Reonite position block fits bottles up to 18 in long. All 5 kits are made for round bottles, and the Camdios kit adds a handheld cutter for the flat sides of suitable square bottles. Tapered bottles are a poor fit for wheel jigs, since the wheels need a smooth round surface to roll against.
Oil, finishing tools and the kit
2 of the 5 kits include cutting oil and a dropper, and the Glass Bottle Cutter Kit states that oil is not included. Every kit includes sandpaper and gloves, and 4 of the 5 kits include a glass drill bit. Rubber rings appear in every kit: 6 rings in 3 kits and 4 rings in 2 kits.
Cut glass has a sharp edge until it is sanded. Wear safety glasses and gloves during the process, and wet sanding helps reduce glass dust.
Project Match
Match the project to the pick:
- Vases and candle holders from wine bottles, cut to matching lengths: Godora, Camdios
- Champagne and liquor bottles, wide or long: Kalawen, Reonite
- Thick and thin glass walls in the same kit: Godora, Camdios
- A kit with oil, a drill bit and gloves in the box: Godora
- Square bottles: Camdios, with the handheld cutter on the flat sides
How the scores add up
Each cutter is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing, and a warranty scores only where the listing states a term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Godora Bottle Cutter | 9.6 | 30 | 21 | 21 | 5 | 0 |
| Camdios Bottle Cutter | 9.6 | 30 | 21 | 20 | 5 | 0 |
| Kalawen Bottle Cutter | 9.5 | 29 | 21 | 20 | 4 | 0 |
| Reonite Bottle Cutter | 9.5 | 28 | 20 | 20 | 4 | 0 |
| Glass Bottle Cutter Kit | 9.5 | 28 | 20 | 19 | 4 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What is the best glass bottle cutter?
The Godora kit leads this guide, with a pre-installed general head plus 2 extra heads for 3-6 mm and 6-12 mm glass, cutting oil and a dropper, a steel backstop and a handheld cutter. The Camdios kit is close behind, with the same head ranges and a scale-guided wooden base.
How do you use a glass bottle cutter?
Remove the label, then clean and dry the glass. Add 1-2 drops of cutting oil, then rotate the bottle 1 full turn with even pressure to create a continuous score line, and avoid scoring the same line twice. Alternate hot and cold water directly along the line until the glass separates, then sand the cut edge. Wear safety glasses and gloves during the process.
Can a glass bottle cutter cut square bottles?
Most wheel jigs cannot: the Glass Bottle Cutter Kit states it is not for square, rectangular or tapered bottles, because the wheels need a smooth round surface to roll against. The Camdios kit includes a handheld glass cutter for the flat sides of suitable square bottles.
Do you need cutting oil for a glass bottle cutter?
Oil helps lubricate the wheel and support a controlled score. 2 of the 5 kits include cutting oil and a dropper, while the Glass Bottle Cutter Kit states that cutting oil is not included and a dedicated glass cutting oil is sold separately.
Related: the glass crafts hub, the best stained glass grinder picks, best glass paint for finished pieces, and the best diamond tip drill bit set for tile and glass.




