Best Wine Bottle Glass Cutter (2026)
Five glass bottle cutter kits for wine bottles, compared by cutting heads, backstop design, kit contents and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGodora Bottle Cutter Kit9.6/10View on Amazon - 2
Best for Long BottlesOAIEGSD Bottle Cutter Kit9.5/10View on Amazon - 3
Best for Square BottlesCamdios Bottle Cutter Kit9.5/10View on Amazon - 4
Best Metal BaseHaroKing Bottle Cutter Kit9.5/10View on Amazon
Empty wine bottles pile up fast when you turn them into candle holders, vases and drinking glasses. A best wine bottle glass cutter turns those bottles into straight, repeatable cuts instead of the rough breaks you get from scoring freehand. This guide compares cutter kits on the parts that decide the result: the cutting heads, the backstop, the scales that repeat a cut length, and what comes in the box.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Godora Bottle Cutter Kit: Three carbide cutting heads for 3-6 mm and 6-12 mm glass, dual reference scales and the fullest accessory kit in this guide. Check price on Amazon
- Best for Long Bottles OAIEGSD Bottle Cutter Kit: Five support wheels and length adjustment up to 19.5 inch, with two cutting heads the maker rates at over 400,000 cuts. Check price on Amazon
- Best for Square Bottles Camdios Bottle Cutter Kit: The only pick here that covers square bottles, with the included handheld glass cutter for the flat sides. Check price on Amazon
- Best Metal Base HaroKing Bottle Cutter Kit: A stable metal base, adjustable supports and knobs, and a stated 1 year warranty. Check price on Amazon
Machines on the list

Godora Glass Bottle Cutter Kit
A wooden-base glass bottle cutter kit with three carbide heads for 3-6 mm and 6-12 mm glass, dual reference scales and a full accessory set.
Pros
- Three carbide cutting heads: one general head plus heads for 3-6 mm and 6-12 mm glass
- Dual reference scales and an adjustable position block for repeatable cut lengths
- Thickened steel backstop secured with 3 screws and replaceable non-slip pads
- Full kit: handheld glass cutter, glass drill bit, 3 sandpaper sheets, 4 rubber rings, gloves, oil dropper and wrench
Cons
- Cutting oil is not included
- For round bottles only; check size and wall thickness before scoring
- No warranty term is stated
- Gloves are included but safety glasses are not; the maker says to wear your own

Glass Bottle Cutter Tool Kit
A metal-base glass bottle cutter kit for round wine, beer, whiskey and champagne bottles, with adjustable supports and a stated 1 year warranty.
Pros
- Cuts round wine, beer, liquor, whiskey, alcohol and champagne bottles
- Stable metal base with adjustable supports and knobs for bottles of various sizes
- Complete 13-piece kit with screwdriver, scoring tool, safety gloves, rubber rings, sandpaper sheets, cleaning brush and twine
- Stated 1 year warranty
Cons
- The 13.0 inch base needs more table space than the shorter cutters here
- No spare cutting head is included
- No glass drill bit is in the kit
- Only round bottles are named

Glass Bottle Cutter Kit, Upgraded Bottle Cutting
A glass bottle cutter kit with five support wheels, two diamond carbide heads and length adjustment up to 19.5 inch.
Pros
- Two cutting heads the maker rates at over 400,000 cuts
- Five support wheels with a removable backstop and multi-dimension adjustment holes
- Adjustable length up to 19.5 inch for longer bottles
- Full kit with spare blade, glass cutter, 6 rubber rings, drill bit, screwdriver, oil dropper, sponge and gloves, plus an E-book and video tutorials
Cons
- No warranty term is stated
- For round bottles only
- The kit includes 2 sandpaper sheets, fewer than the 3 sheets in the Godora and Camdios kits
- One spare cutting blade is included; a second spare is not

Smasener Glass Bottle Cutter,Upgrade Glass
A stainless steel base glass bottle cutter with a brass head, tungsten carbide blade and a stated 1 Year Manufacturer warranty.
Pros
- Stainless steel base plate with a double baffle design for stability
- Brass cutter head with a tungsten carbide blade
- Calibrated guides and dual positioning stops for consistent scoring
- Stated 1 Year Manufacturer warranty
Cons
- The 11.8 inch base gives the shortest support length of the five cutters
- For round bottles only
- No removable backstop is named
- No square-bottle option is named

Camdios Glass Bottle Cutter
A wooden-base glass bottle cutter kit with dual scales, two extra heads for 3-6 mm and 6-12 mm glass, and a handheld cutter for square bottles.
Pros
- Two extra cutting heads for 3-6 mm and 6-12 mm glass
- Two marked scales for repeatable cut lengths
- Thickened steel backstop secured with three screws and replaceable non-slip sponge pads
- Covers square bottles too, with the included handheld glass cutter for the flat sides
Cons
- No glass drill bit or oil dropper is in the kit
- Cutting oil is not named in the kit
- Square bottles need the handheld cutter and extra steps
- No E-book or video tutorials are included
Specs compared
| Model | HQ Score | Cutting heads | Backstop | Adjustable length | Kit extras | Safety | Warranty |
|---|---|---|---|---|---|---|---|
| Godora Bottle Cutter Kit | 9.6/10 | 3 heads: general, 3-6 and 6-12 mm | Steel, 3 screws | Dual scales, position block | Drill bit, oil dropper, gloves | Gloves included | Not stated |
| HaroKing Bottle Cutter Kit | 9.5/10 | 1 scoring wheel | Metal base, adjustable supports | Adjustable supports and knobs | 13-piece kit | Safety gloves | 1 year |
| OAIEGSD Bottle Cutter Kit | 9.5/10 | 2 heads, over 400,000 cuts | Removable, 5 wheels | Up to 19.5 inch | Spare blade, drill bit, oil dropper | Gloves included | Not stated |
| Smasener Bottle Cutter | 9.5/10 | 1 tungsten carbide blade | Double baffle, stainless base | Calibrated guides, dual stops | Not stated | Not stated | 1 year |
| Camdios Bottle Cutter Kit | 9.5/10 | 2 extra heads: 3-6 and 6-12 mm | Steel, 3 screws | Dual scales | Handheld cutter, gloves | Gloves included | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 21 November 2026. Cutting head ranges are the glass wall thicknesses each maker states.
What the listings tell you, and what they leave out
Five glass bottle cutter listings were compared for this guide. Only two stated a warranty term with a concrete length: the Smasener and the HaroKing, each at 1 year. Four kits name gloves in the box, and one maker advises wearing your own safety glasses. Two kits name extra cutting heads for 3-6 mm and 6-12 mm glass, and one rates its heads at over 400,000 cuts.
Only the Godora kit names an oil dropper, and it states that cutting oil is not included. The other kits name no cutting oil in their box contents, so plan on buying oil separately. The Smasener kit names a complete set of accessories without itemizing them, so its box contents are the least detailed here.
Score once and separate with hot and cold water, then wet sand the cut edge, as the Godora instructions describe. The Smasener maker gives the same warning in other words: rotate the bottle once, with no back-and-forth cuts to deepen the scratch.
Buying guide: the best wine bottle glass cutter
Cutting heads and wall thickness
Two kits in this guide include extra heads for 3-6 mm and 6-12 mm glass: the Godora and the Camdios. Match the head to the wall thickness of the bottle you plan to cut. The OAIEGSD kit takes a different approach, with two diamond carbide heads the maker rates at over 400,000 cuts. The Smasener and HaroKing kits name a single blade each: tungsten carbide in a brass head for the Smasener, and a precision scoring wheel for the HaroKing.
Backstop and scales
A backstop holds the bottle steady while you rotate it. The Godora and Camdios kits use a thickened steel backstop secured with 3 screws, and both add dual reference scales so you can return to the same cutting position. The OAIEGSD kit uses 5 support wheels with a removable backstop and multi-dimension adjustment holes, and adjusts in length up to 19.5 inch. The Smasener uses a double baffle design on a stainless steel base plate with calibrated guides and dual positioning stops. The HaroKing uses adjustable supports and knobs on a metal base.
What comes in the box
Kit contents decide how much else you need to buy. The Godora kit is the fullest: a handheld glass cutter, glass drill bit, 3 sandpaper sheets, 4 rubber rings, gloves, 2 spare non-slip pads, an oil dropper, a wrench and instructions, with cutting oil not included. The HaroKing kit counts 13 pieces, including a screwdriver, scoring tool, safety gloves, rubber rings, sandpaper sheets, cleaning brush and twine. The OAIEGSD kit adds an E-book and video tutorials beside a spare blade, drill bit, screwdriver and oil dropper. The Camdios kit includes a handheld glass cutter, three sandpapers, four rubber rings, gloves, a wrench and two spare base pads.
Round bottles, and the square exception
Four of the kits are for round bottles: wine, beer and liquor bottles, with the HaroKing also naming whiskey, alcohol and champagne. The Camdios kit is the exception: it scores round bottles on the wooden base and covers suitable square bottles with the included handheld glass cutter on the flat sides. Check the size and wall thickness of your bottles against the head ranges before you buy.
Glass cutting leaves sharp edges and glass dust. Wear safety glasses and the gloves from the kit, score once and separate the bottle with hot and cold water, then wet sand the cut edge. Work on a stable table and keep the cutter steady while you rotate the bottle.
Project Match
- Candle holders and vases from standard wine bottles: the Godora kit, with dual scales for matching cut lengths.
- Drinking glasses from long bottles: the OAIEGSD kit, with length adjustment up to 19.5 inch.
- Planters and lamps from square bottles: the Camdios kit, with the handheld cutter for flat sides.
- Whiskey and champagne bottles: the HaroKing kit, which names those bottle types.
- A first kit with a stated warranty: the Smasener or the HaroKing, each with a 1 year term.
How the scores add up
Each cutter is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Godora Bottle Cutter Kit | 9.6 | 30 | 21 | 21 | 5 | 0 |
| HaroKing Bottle Cutter Kit | 9.5 | 26 | 20 | 20 | 4 | 2 |
| OAIEGSD Bottle Cutter Kit | 9.5 | 30 | 20 | 21 | 5 | 0 |
| Smasener Bottle Cutter | 9.5 | 26 | 21 | 18 | 3 | 2 |
| Camdios Bottle Cutter Kit | 9.5 | 28 | 20 | 20 | 5 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What is the best wine bottle glass cutter in this guide?
The Godora Glass Bottle Cutter Kit ranks first, with three carbide heads for 3-6 mm and 6-12 mm glass, dual reference scales and the fullest accessory kit in this guide. The HaroKing kit follows it, with a metal base and a stated 1 year warranty.
How do you use a glass cutter on a wine bottle?
Add cutting oil, score once around the bottle, separate it with hot and cold water, then wet sand the cut edge. The Godora instructions describe exactly that sequence, and the maker advises wearing your own safety glasses.
Which bottles can these cutters cut?
Four of the five kits are for round bottles: wine, beer and liquor bottles, with the HaroKing also naming whiskey, alcohol and champagne. The Camdios kit also covers suitable square bottles with its included handheld glass cutter.
What is the difference between the 3-6 mm and 6-12 mm cutting heads?
Each head matches a glass wall thickness range. The Godora and Camdios kits include both heads, so you choose the head that matches the bottle wall thickness you are cutting.
Do these kits include everything needed to start?
Cutting oil is not in the Godora kit, which states it plainly, and no other kit names cutting oil in its box contents. Four kits include gloves, and the Godora kit advises wearing your own safety glasses, which are not in the box.
Related: the glass crafts hub, best laser engraver for wine glasses, best glass paint for wine glasses, best blank wine glasses for laser engraving, and pottery and glass hub.




