Best 20W Laser Engraver (2026): 5 Machines Compared
20W diode laser engravers compared by stated cut depth, work area, speed, rotary support and safety, from a portable galvo to a large gantry with a honeycomb table.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallLonger RAY5 Bundle9.7/10View on Amazon - 2
Best PortableRaymoto R1 Pro 20W9.6/10View on Amazon - 3
Best for CuttingLonger RAY5 Honeycomb9.6/10View on Amazon - 4
Best Safety KitATOMSTACK A20 Pro V29.6/10View on Amazon - 5
Best Large AreaTwotrees TTS-20 Pro9.6/10View on Amazon
A maker with a stack of blanks and a weekend market stall wants signs, tumblers, leather patches and cut parts that sell. A diode machine of this size sits in the middle of that wish list: strong enough to cut thin wood and acrylic, small enough for a home shop. This best 20w laser engraver roundup compares the machines below on stated cut depth, work area, speed, rotary support and safety, using only what each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Longer RAY5 Bundle: 20W RAY5 with air pump, 3-in-1 roller and lifetime support for wood, leather and acrylic Check price on Amazon
- Best Portable Raymoto R1 Pro 20W: Handheld 20W galvo at 2000 mm/s, about 3.22 lb, with OD6+ cover and child lock Check price on Amazon
- Best for Cutting Longer RAY5 Honeycomb: Cuts 15 mm pine and 8 mm acrylic in one pass, with air pump and honeycomb table Check price on Amazon
- Best Safety Kit ATOMSTACK A20 Pro V2: Class 4 with tilt sensor, limit switches, eye shield and glasses, plus 60L/min air Check price on Amazon
- Best Large Area Twotrees TTS-20 Pro: 418 x 418 mm work area at up to 30000 mm/min with offline TF card support Check price on Amazon
Machines on the list

Longer RAY5 Laser Engraver Bundle,20W Output Power
A 20W RAY5 bundle with air pump and a 3-in-1 rotary for cups, tumblers and rings, with 4 connection modes and offline use.
Pros
- Cuts 15 mm pine and 8 mm acrylic in one pass, 25 mm wood and 35 mm acrylic with multiple passes
- 3-in-1 rotary with Roller, Chuck, Sphere and Ring modules for cups, tumblers and rings
- USB, TF card, Wi-Fi and app connections with offline operation
- Lifetime technical support and 24-hour customer service stated
Cons
- No specific safety features are listed beyond safety protection in the title
- Color scale and focus figures are stated without a sample piece or method
- No honeycomb work table is included in this bundle
- No weight is stated in the listing

Raymoto R1 Pro 20W Laser Engraver Machine
A portable 20W galvo engraver at up to 2000 mm/s, about 3.22 lb, with an OD6+ cover, emergency stop and child lock.
Pros
- Up to 2000 mm/s engraving with galvanometer and field lens
- About 3.22 lb with a carry handle for handheld or desktop use
- OD6+ cover blocking 99% of harmful light, plus hall sensor cutoff and child lock
- USB, Bluetooth and 2.4G Wi-Fi with LightBurn or the Raymoto app
Cons
- Tilt and lid-opening emergency stop functions are off by default and must be enabled in software
- No cut depths are stated in the listing
- No work area is stated in the listing
- No rotary is stated in the listing

Longer RAY5 20W Laser Engraver with Air Pump
A 20W RAY5 with air pump and a 17.3 x 17.3 in honeycomb table, cutting 15 mm pine and 8 mm acrylic in one pass.
Pros
- Cuts 15 mm pine and 8 mm acrylic in one pass, 25 mm wood and 35 mm acrylic with multiple passes
- Air pump with adjustable 10-30L/min airflow and a 2 m tube
- Honeycomb table with double-layer protection for cleaner cuts
- Protective cover, safety glasses, motion protection and thermal detection with alarm
Cons
- No warranty term is stated
- No rotary attachment is stated in this bundle
- No work area is stated beyond the honeycomb table size
- The 256-bit color scale is stated without a sample piece or method

ATOMSTACK 20W Laser Engraver
A 20W open-frame diode bundled with an F80 air pump and the R8 4-in-1 rotary for rings to 200 mm tumblers.
Pros
- 20W stated as optical output, the most diode power in this guide
- R8 rotary combines roller, chuck, sphere and ring modules for 12 to 200 mm items
- 60 L/min air pump in the bundle for cleaner cuts
- Tilt sensor, limit switches, a magnetic eye shield and safety glasses, with a 1 year warranty
Cons
- Open frame: needs ventilation and supervision
- Work area is not stated in the listing
- Only one rating on this bundle
- No FDA accession number

Twotrees TTS-20 Pro Laser Engraver
A 20W open-frame diode with at least 19.5W stated optical power, a 418 x 418 mm bed and a 1 year warranty.
Pros
- States optical power directly: at least 19.5W at 450 nm
- 418 x 418 mm work area, the largest in this guide
- Wi-Fi, USB and offline TF card jobs, with auto homing before each job
- Listing table states a 1 year warranty
Cons
- No safety features named in the listing
- No one-pass cut ratings stated
- Air assist is an upgrade, not included
Other machines to compare
WECREAT Vision 20WCheck price on Amazon
Longer New Upgrade RAY5 Laser Engraver CutterCheck price on Amazon
ATOMSTACK 20W Laser Engraver A20 PRO V2 Laser CutterCheck price on Amazon
Acmer S2 20W Laser EngraverCheck price on Amazon
LONGER Ray5 Laser Engraver and Cutter MachineCheck price on Amazon
Specs compared
| Model | HQ Score | Source | Size | Rated speed | Rotary | Safety statement | Warranty |
|---|---|---|---|---|---|---|---|
| Longer RAY5 Bundle | 9.7/10 | 20W | 400 x 365 mm | Not stated | 3-in-1 included | Safety protection stated | Lifetime technical support |
| Raymoto R1 Pro 20W | 9.6/10 | 20W galvo | 6.77 x 7.0 x 11.89 in | Up to 2000 mm/s | Not stated | OD6+ cover, e-stop, tilt, child lock | 12-month warranty |
| Longer RAY5 Honeycomb | 9.6/10 | 20W | 17.3 x 17.3 in honeycomb table | Not stated | Not stated | Cover, glasses, motion, thermal | Not stated |
| ATOMSTACK A20 Pro V2 | 9.6/10 | 20W | Not stated | Up to 400 mm/s | R8 chuck included | Class 4, tilt sensor, shield, glasses | Not stated |
| Twotrees TTS-20 Pro | 9.6/10 | 20W diode, 450±5 nm | 418 x 418 mm | Up to 30000 mm/min | Not stated | Not stated | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 3 November 2026. Cut depths are for one pass unless the listing states multiple passes.
What the listings tell you, and what they leave out
The listings state a warranty term for 2 of the 5 machines: lifetime technical support on the Longer bundle and a 12-month warranty on the Raymoto. Only the Raymoto states an OD rating, OD6+ on its cover. No listing here states a laser class except the ATOMSTACK, which states Class 4.
Treat every machine here as a Class 4 laser unless the label on the machine itself says otherwise.
Buying guide: choosing the best 20w laser engraver
Cut depth and passes
A one-pass figure and a multiple-pass figure are different claims, so read which one applies to the material at hand. The Longer listings state 15 mm pine and 8 mm acrylic in one pass, and up to 25 mm wood and 35 mm acrylic with multiple passes, plus precise cutting of 0.05 mm stainless steel. The Raymoto, Twotrees and ATOMSTACK listings state no cut depths, so their cutting claims rest on the 20W module alone.
Work area
The Twotrees lists the largest work area here, 418 x 418 mm, and the Longer bundle lists 400 x 365 mm. The Raymoto lists product dimensions of 6.77 x 7.0 x 11.89 in, which describe the machine, not the work area, and the ATOMSTACK listing states no work area at all. Measure the largest blank before ordering, since a machine that cannot fit the work cannot engrave it.
Rotary for tumblers and rings
Round items need a rotary axis. The Longer bundle includes a 3-in-1 rotary with Roller, Chuck, Sphere and Ring modules, and the ATOMSTACK includes an R8 rotary chuck. The Raymoto, Twotrees and Honeycomb listings state no rotary. If tumblers are the main product, see our how to engrave a tumbler with a rotary guide.
Air assist
Air assist clears smoke and cools the cut, which keeps edges cleaner. The Longer pump adjusts from 10 to 30L/min with a 2 m tube, and the ATOMSTACK pump moves 60L/min. The Twotrees and Raymoto listings state no air assist.
What a diode laser will not do
A 20W diode cuts thin stock in one pass and thicker stock with multiple passes, and it marks coated metal. Never laser PVC, vinyl, polycarbonate or ABS. If most of the work is marking bare metal, a fiber machine fits better; see our materials you should never laser cut guide before choosing stock.
Diode lasers emit blue light at about 450 nm, and the beam reflects off metal and glass. Wear glasses rated with an optical density (OD) for 450 nm, shield the beam path, never leave a job running unattended, and vent fumes from coatings and plastics. Never mark PVC. See the FDA guidance on laser products and OSHA laser hazards.
Project Match
- Signs and cut parts in wood and acrylic: Longer RAY5 Bundle or Longer RAY5 Honeycomb, with stated cuts of 15 mm pine and 8 mm acrylic in one pass.
- Tumblers, cups and rings: Longer RAY5 Bundle with its 3-in-1 rotary, or ATOMSTACK A20 Pro V2 with its R8 rotary chuck.
- Gifts and small business runs on the move: Raymoto R1 Pro, about 3.22 lb with a carry handle.
- Large flat work: Twotrees TTS-20 Pro, with a 418 x 418 mm work area.
- Work area: not stated for the Raymoto R1 Pro and ATOMSTACK A20 Pro V2.
How the scores add up
Each machine is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Longer RAY5 Bundle | 9.7 | 32 | 22 | 22 | 3 | 3 |
| Raymoto R1 Pro 20W | 9.6 | 28 | 20 | 20 | 8 | 2 |
| Longer RAY5 Honeycomb | 9.6 | 32 | 21 | 21 | 7 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
What can a 20W laser cut?
The Longer listings state 15 mm pine and 8 mm acrylic in one pass, and up to 25 mm wood and 35 mm acrylic with multiple passes. The Raymoto, Twotrees and ATOMSTACK listings state no cut depths.
Can a 20W laser engraver cut metal?
Only thin stock. The Longer listings state precise cutting of 0.05 mm stainless steel. A 20W diode is a marking and thin-cut tool, not a sheet metal cutter.
Can a 20W laser engrave stainless steel?
The Longer listings state precise cutting of 0.05 mm stainless steel, and the Twotrees listing names coated stainless steel. The Raymoto listing names metal among its engraving materials.
Can a 20W laser engrave glass?
The Longer and Twotrees listings name glass among their materials. The Raymoto and ATOMSTACK listings do not name glass.
Can a 20W laser engrave aluminum?
None of the listings here names aluminum directly. The Longer, Raymoto and ATOMSTACK listings name metal in general, and the Twotrees listing names coated stainless steel.
Related: the diode laser engraver hub and the laser engraver hub. Also see our 10w vs 20w laser engraver. Also see our best 20w laser engraver for metal. Also see our longer ray5 vs atomstack a10 pro. Also see our atomstack a5 pro vs longer ray5. Also see our can a diode laser engrave metal. Also see our how to engrave stainless steel with a diode laser.




