Best Nozzle for Bambu Lab A1 (2026): 5 Hotends Compared
Five hotend and nozzle kits for the Bambu Lab A1, A1 Mini and A2L, compared by size, material, temperature and pack size.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHzdaDeve 4-Pack Hotend9.7/10View on Amazon - 2
Best High-TempCreatryLab 2-Pack9.7/10View on Amazon - 3
Best Wide FitREDREX Wide-Fit 2-Pack9.6/10View on Amazon - 4
Best StainlessUniTak3D Stainless 0.49.6/10View on Amazon
A print that should be crisp comes out stringy, or a nozzle clogs halfway through a long job, and the fix is often the hotend itself. This guide covers the best nozzle for Bambu Lab A1, comparing five hotend kits for the A1, A1 Mini and A2L on nozzle size, material, temperature and pack size.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall HzdaDeve 4-Pack Hotend: 4 nozzle sizes in hardened steel, rated to 350°C. Check price on Amazon
- Best High-Temp CreatryLab 2-Pack: Detachable 0.4 mm nozzle rated to 380°C, with 4 silicone socks and 2 brushes. Check price on Amazon
- Best Wide Fit REDREX Wide-Fit 2-Pack: Fits A1, A1 Mini, A2L, P2S, X2D and H2D printers in one kit. Check price on Amazon
- Best Stainless UniTak3D Stainless 0.4: Stainless steel 0.4 mm hotend with a 0.02 mm diameter tolerance. Check price on Amazon
Machines on the list

4‑Pack 0.2/0.4/0.6/0.8mm A1 Hotend for Bambu Lab
A 4-pack of A1 hotends with four sizes of hardened steel nozzles, a titanium alloy throat tube and a 350°C maximum.
Pros
- 4 nozzle sizes in one kit, starting at 0.2 mm
- Hardened steel nozzles for abrasive and fiber-filled filaments
- Rated to 350°C for PLA, PETG, ABS, ASA, PA, PC, TPU and fiber-filled filaments
- Replaceable threaded nozzle, so a worn nozzle swaps in minutes
Cons
- No warranty term is stated
- No silicone cover is listed in the kit
- No safety listing is stated
- No weight or dimensions are stated for the kit

CreatryLab A1/A1 Mini/A2L 0.4mm Hardened Steel
A 2-pack of 0.4 mm hardened steel hotends with a detachable nozzle, magnetic quick-swap and a 380°C maximum for the A1, A1 Mini and A2L.
Pros
- Rated to 380°C, the highest here
- Detachable nozzle: replace only the tip, not the whole hotend
- Kit includes 4 silicone socks, 2 silicone brushes and 1 tool
- Magnetic quick-swap with a snug fit and no wobble
Cons
- No warranty term is stated
- Only 0.4 mm nozzles; no other size is offered
- No safety listing is stated
- Only 2 hotends in the kit, where the HzdaDeve kit holds 4

2PCS Nozzle for Bambu Lab A1/A1
A 2-pack of 0.4 mm hardened steel hotends with a silicone sleeve and tool-free quick-change, fitting the A1, A1 Mini, A2L, P2S, X2D and H2D printers.
Pros
- Fits A1, A1 Mini, A2L, X2D, H2D, H2S, H2C and P2S
- Hardened steel nozzle for PLA-CF, PETG-CF, PLA, PETG and TPU
- Tool-free quick-change with a latch
- Silicone sleeve included
Cons
- No warranty term is stated
- No maximum temperature is stated
- Only 0.4 mm nozzles; no other size is offered
- No safety listing is stated

Upgrade A1/A1 Mini/A2L Hotend 0.4mm Hardened Steel
A 2-pack of 0.4 mm hardened steel hotends with a silicone cover, magnetic quick-swap and a 300°C maximum for the A1, A1 Mini and A2L.
Pros
- Hardened steel nozzle with no burrs
- Nozzle diameter tolerance of less than 0.02 mm
- Rated to 300°C for PLA, ABS, PETG, PC and PVA
- Magnetic quick-swap with a silicone cover
Cons
- No warranty term is stated
- Only 0.4 mm nozzles; no other size is offered
- No safety listing is stated

Upgrade A1/ A1 Mini/ A2L Quick-Swap Hotend 0.4mm
A single 0.4 mm stainless steel hotend with a silicone cover, magnetic quick-swap and a 300°C maximum for the A1, A1 Mini and A2L.
Pros
- Stainless steel nozzle with no burrs
- Nozzle diameter tolerance of less than 0.02 mm
- Rated to 300°C for PLA, ABS, PETG, PC and PVA
- Magnetic quick-swap with a silicone cover
Cons
- No warranty term is stated
- Single hotend only; no spare is included
- Stainless steel, not hardened steel, for abrasive filaments
- No safety listing is stated
Other machines to compare
Upgraded 0.2MM P1S/P1P Hotend Full AssemblyCheck price on Amazon
Genuine Bambu Lab Hotend with Nozzle for P1S P1P X1C X1Check price on Amazon
2‑Pack 0.4mm P2S Nozzle for Bambu Lab 3D Printer CompatibleCheck price on Amazon
CNZTHDY 4PCS 3D Printer H2D/H2S Silicone Nozzle Brush forCheck price on Amazon
Specs compared
| Nozzle | HQ Score | Sizes | Material | Max temp | Pack | Swap |
|---|---|---|---|---|---|---|
| HzdaDeve 4-Pack Hotend | 9.7/10 | 4 sizes from 0.2 mm | Hardened steel | 350°C | 4 | Quick swap, plug-and-play |
| CreatryLab 2-Pack | 9.7/10 | 0.4 mm | Hardened steel | 380°C | 2 | Magnetic quick-swap |
| REDREX Wide-Fit 2-Pack | 9.6/10 | 0.4 mm | Hardened steel | Not stated | 2 | Tool-free quick-change |
| REDREX 2-Pack Hardened | 9.6/10 | 0.4 mm | Hardened steel | 300°C | 2 | Magnetic quick-swap |
| UniTak3D Stainless 0.4 | 9.6/10 | 0.4 mm | Stainless steel | 300°C | 1 | Magnetic quick-swap |
Specs are what each manufacturer publishes as its rating on the listing, collected 4 November 2026.
What the listings tell you
We read 5 hotend listings for the Bambu Lab A1. Only 1 offered more than one nozzle size, with 4 sizes in one kit. Only 2 stated a maximum temperature above 300°C, at 350°C and 380°C. None stated a warranty term.
Buying guide: choosing a best nozzle for Bambu Lab A1
Nozzle size
Size sets detail against speed. The HzdaDeve listing states the 0.2 mm nozzle suits small and intricate models, the 0.4 mm suits everyday use, and the larger nozzles suit large structural parts. The other four kits offer only a 0.4 mm nozzle, which the listings describe as the everyday size.
Hardened steel or stainless steel
Material sets which filaments the nozzle can handle. The HzdaDeve, CreatryLab and both REDREX kits use hardened steel, which the listings tie to abrasive and fiber-filled filaments. The UniTak3D kit uses stainless steel, and its listing names PLA, ABS, PETG, PC and PVA, with no fiber-filled filament named.
Temperature
Maximum temperature sets which filaments the hotend can run. The CreatryLab lists 380°C, the HzdaDeve lists 350°C, and the UniTak3D and the REDREX 2-pack list 300°C. The REDREX wide-fit kit states no maximum temperature, so check it before printing high-temperature filaments.
Quick swap and spares
All five kits swap without tools or complicated wiring. The CreatryLab and the HzdaDeve kits go further: the CreatryLab nozzle tip detaches, so only the tip needs replacing, and the HzdaDeve nozzle is a replaceable threaded part. The CreatryLab kit includes 4 silicone socks, 2 silicone brushes and 1 tool, and the other kits include a silicone cover or sleeve.
Use as directed. Cool the print head completely before swapping a hotend, and avoid touching the heating block to prevent scalding, per the REDREX listing. Never print filaments the listing does not name for the hotend.
Project Match
- Small and intricate models: the HzdaDeve 0.2 mm nozzle, per its listing.
- Everyday PLA and PETG prints: the 0.4 mm nozzles in all five kits.
- Large structural parts: the larger HzdaDeve nozzles, per its listing.
- Fiber-filled filaments: the hardened steel nozzles in the HzdaDeve, CreatryLab and both REDREX kits.
- A second printer, such as a P2S or H2D: the REDREX wide-fit kit, which lists A1, A1 Mini, A2L, X2D, H2D, H2S, H2C and P2S.
How the scores add up
Each hotend is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a safety listing or a warranty term, so every hotend here scores zero on those two criteria; the ranking comes from nozzle sizes, material, temperature and pack size.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HzdaDeve 4-Pack Hotend | 9.7 | 33 | 22 | 22 | n/a | 0 |
| CreatryLab 2-Pack | 9.7 | 32 | 21 | 21 | n/a | 0 |
| REDREX Wide-Fit 2-Pack | 9.6 | 29 | 21 | 21 | n/a | 0 |
| REDREX 2-Pack Hardened | 9.6 | 29 | 20 | 21 | n/a | 0 |
| UniTak3D Stainless 0.4 | 9.6 | 28 | 20 | 20 | n/a | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
What nozzle size should I use on the Bambu Lab A1?
Match the size to the print. The HzdaDeve listing states the 0.2 mm nozzle suits small and intricate models, the 0.4 mm suits everyday use, and the larger nozzles suit large structural parts. All five kits here include a 0.4 mm nozzle.
Do these hotends fit the A1 Mini?
Yes. All five listings name the Bambu Lab A1, A1 Mini and A2L, and the REDREX wide-fit kit also names the P2S, X2D, H2D, H2S and H2C. Each kit is listed as a direct plug-and-play or quick-swap replacement.
What temperature can these hotends reach?
The CreatryLab lists 380°C, the HzdaDeve lists 350°C, and the UniTak3D and the REDREX 2-pack list 300°C. The REDREX wide-fit kit states no maximum temperature, so check it before printing high-temperature filaments.
Can I replace just the nozzle instead of the whole hotend?
On two kits, yes. The CreatryLab nozzle tip detaches, so only the tip needs replacing, and the HzdaDeve nozzle is a replaceable threaded part. The UniTak3D and both REDREX kits are integrated hotends, so the whole hotend swaps as one part.
Related: the best 3D printing nozzle guide, 3D printer nozzle size and our 3D printers hub. Also see our best 3D PLA filament. Also see our 3D printer maintenance. Also see our best filament for Christmas ornaments.




