Bambu Lab A1 Mini vs Creality K2 Plus: Which One Should You Buy?
A large-format multi-color printer and a spare PTFE tube for the A1 Mini, compared on what each listing actually states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Creality K2 Plus Combo 3D Printer9.7/10View on Amazon - 2
Ultra-Clear Tube for 1.75mm filament for Bambu Lab9.2/10View on Amazon
A maker choosing between the Bambu Lab A1 Mini and the Creality K2 Plus wants to know which machine fits the projects on the bench: small parts and prototypes, or large multi-color prints. This comparison of bambu lab a1 mini vs creality k2 plus goes through what each listing actually states, because the two listings are not the same kind of product: one side lists a large-format multi-color printer, the other a spare PTFE tube that fits the A1 Mini.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: pick the Creality K2 Plus Combo if you want the printer itself: it is the only printer listing here, with a stated 350 x 350 x 350 mm build volume, 600mm/s speed and 16-color printing with four CFS units. Pick the REDREX tube if you already own a Bambu Lab A1 Mini and need a spare 5M tube for 1.75mm filament. The tube listing states nothing about a printer, so it is a maintenance part for the A1 Mini side, not a printer rival.
Machines on the list

Creality K2 Plus Combo 3D Printer
A large-format multi-color 3D printer with a stated 350 x 350 x 350 mm build volume, 600mm/s speed, four CFS units for 16-color prints, dual AI cameras and a 1 Year warranty.
Pros
- 350 x 350 x 350 mm build volume, the only build volume stated here
- 16-color printing with four CFS units, RFID filament reading and auto relay
- 600mm/s speed with 30000mm/s² acceleration and 40mm³/s flow stated
- Two AI cameras and 18 smart sensors with full auto-leveling
Cons
- No safety certification is stated
- 16-color printing needs four CFS units hooked together
- Large stated size of 16.1 x 15.4 x 18.7 inches needs a big bench
- No TPU or flexible filament support is stated

Ultra-Clear Tube for 1.75mm filament for Bambu Lab
A transparent PTFE Bowden tube for 1.75mm filament, 2.5mm ID by 4mm OD and 5M long, that fits the Bambu Lab A1 Mini and other listed models.
Pros
- Transparent tube shows filament feeding and discharging
- 5M length cuts to the size each printer model needs
- PTFE build stated as durable and corrosion resistant, with friction under 0.1
- Fits Bambu Lab A1 and A1 Mini, plus X1C, P1P, P1S and listed Creality models
Cons
- Not a printer: it states no build volume, speed or nozzle figures
- Not for TPU or TPE flexible filaments, per the listing
- Must sit at the same level or below the printer, not top-mounted
- No warranty term is stated
Other machines to compare
Creality K2 Plus Combo 2026 Multi Color 3D Printer with CFSCheck price on Amazon
Creality K2 Plus Combo 3D PrinterCheck price on Amazon
Creality K2 Plus Combo 3D Printer Multi Color Printing withCheck price on Amazon
Bambu Lab A1 Mini ComboCheck price on Amazon
Creality PLA Plus 3D Printer Filament Multicolor ChristmasCheck price on Amazon
Creality K2 Plus Build Plate Epoxy Resin Coating 370x370mmCheck price on Amazon
Bambu Lab A1 Mini vs Creality K2 Plus side by side
| Spec | Creality K2 Plus Combo | REDREX PTFE Tube 5M | |
|---|---|---|---|
| HQ Score | 70 | 40 | |
| Type | 3D printer, multi-color combo | PTFE Bowden tube for 1.75mm filament | |
| Build volume | 350 x 350 x 350 mm (13.78 x 13.78 x 13.78 in) | Not stated | |
| Print speed | 600mm/s stated | Not stated | |
| Multi-color | 16 colors with four CFS units | Not stated | |
| Nozzle | High-temp nozzle, up to 350°C, hardened steel tip | Not stated | |
| Cameras | Two AI cameras | Not stated | |
| Warranty | 1 Year | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 9 November 2026. The K2 Plus listing states a 1 Year warranty; the tube listing states none.
Build volume and size
The Creality K2 Plus Combo states a 350 x 350 x 350 mm build volume, given as 13.78 x 13.78 x 13.78 in in the listing title, and the listing says large models do not require partitions. The listing gives the machine size as 16.1 x 15.4 x 18.7 inches, so it needs a large bench. The tube listing states no build volume: it is a tube, not a printer.
Speed and motion
The K2 Plus Combo states 600mm/s printing speed with FOC step-servo motors, 30000mm/s² acceleration and 40mm³/s flow. The tube listing states a friction coefficient under 0.1, but that figure describes filament feeding through the tube, not print speed, so the two figures are not comparable.
Multi-color printing
Only the K2 Plus Combo states multi-color printing. With four CFS units hooked together it delivers 16-color prints, with automatic filament selection, switching and relay, and RFID reading for color and type. The tube listing states no color printing.
Materials and filament
The K2 Plus Combo states a chamber of up to 60°C for ASA and PPA, and a high-temp nozzle with a hardened steel tip that supports up to 350°C for high-melting-point, wear-resistant engineering filaments. The tube listing states it suits PLA, PLA+, ABS and PETG, withstands up to 220°C, and is not for TPU or TPE flexible filaments. The 220°C figure describes the tube and the 350°C figure the K2 Plus nozzle, so they describe different parts.
Cameras and automation
The K2 Plus Combo states two AI cameras, one on the chamber side watching for spaghetti failure and idling, and one on the toolhead for flow rate optimization. It also states 18 smart sensors, full auto-leveling, and two independently motorized Z-axis units that adjust bed tilt before auto leveling. The tube listing states no cameras, sensors or leveling.
Support and warranty
Creality states a 1 Year warranty on the K2 Plus Combo listing, and the tube listing states no warranty term. The K2 Plus listing also states a matrix frame of aerospace-grade aluminum alloy die-casting, with a dual Z-axis and four linear rods for steady bed movement.
Choose the Creality K2 Plus Combo if
- You want large multi-color prints: 350 x 350 x 350 mm build volume and 16 colors from four CFS units.
- You print ASA or PPA and want a chamber stated up to 60°C with a nozzle stated up to 350°C.
- You want cameras and sensors watching the print: two AI cameras and 18 smart sensors stated.
Choose the REDREX tube if
- You already own a Bambu Lab A1 Mini and need a spare tube for 1.75mm filament.
- You print PLA, PLA+, ABS or PETG and want a transparent tube that shows the filament feeding.
- You want a 5M length you can cut to the size your printer model needs.
The REDREX tube is not for TPU or TPE flexible filaments, per the listing, and it must sit at the same level or below the printer, not top-mounted, to avoid feeding issues. Keep bends gentle, since the listing says the tube is slightly stiffer. Ventilate the room when printing ASA or PPA.
Project Match
| Project | Pick | Why, from the listings |
|---|---|---|
| Large multi-color prints | Creality K2 Plus Combo | 350 x 350 x 350 mm build volume, 16 colors with four CFS units |
| High-temperature engineering filaments | Creality K2 Plus Combo | Chamber up to 60°C for ASA and PPA, nozzle up to 350°C |
| Replacing the feed tube on an A1 Mini | REDREX PTFE Tube 5M | Spare tube for 1.75mm filament, suits PLA, PLA+, ABS and PETG |
| Flexible filament prints | Neither | Tube listing excludes TPU and TPE; K2 Plus listing states none |
FAQ: lasers and CNC
Is the REDREX tube a 3D printer?
No. It is a 5M PTFE Bowden tube for 1.75mm filament that fits the Bambu Lab A1 Mini and other listed models; it feeds filament, it does not print.
Which side prints in multiple colors?
The Creality K2 Plus Combo: with four CFS units hooked together it delivers 16-color prints, with automatic filament selection, switching and relay. The tube listing states no color printing.
What build volume does the K2 Plus state?
The listing states 350 x 350 x 350 mm, given as 13.78 x 13.78 x 13.78 in in the title. The tube listing states no build volume.
Can the tube handle TPU filament?
No. The listing states it is not for TPU or TPE flexible filaments, and not for Bowden extruders requiring a larger than 2.5mm ID.
Which listing states a warranty?
The Creality K2 Plus Combo states a 1 Year warranty. The REDREX tube listing states no warranty term.
Related: Bambu Lab A1 vs Creality K1 Max, Qidi Plus4 vs Creality K2 Plus, Creality K2 Plus vs Ender 3 V3, Bambu Lab A1 Mini vs Flashforge Adventurer 5M and the FDM 3D printers guides.




