Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Acrylic Cutter Machine Price: What Affects the Cost

A plain guide to what sets acrylic cutter machine price, and the sheets that suit a cutting project.

Acrylic Cutter Machine Price: What Affects the Cost
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Wesiti 10 Pieces Clear Acrylic Sheets CastWesiti 10 Pieces Clear Acrylic Sheets Cast9.5/10View on Amazon
  2. 2MAITROVA Colored Cast Acrylic Sheets 7 Pack 8x8MAITROVA Colored Cast Acrylic Sheets 7 Pack 8x89.5/10View on Amazon
  3. 312 Piece 1/8 Thick 8 x 8 Inch 3mm Color Casting12 Piece 1/8 Thick 8 x 8 Inch 3mm Color Casting9.4/10View on Amazon

A clear acrylic sign, a set of keychains or a small batch of gift tags all start the same way: a design, a sheet of acrylic and a machine that cuts it cleanly. Acrylic cutter machine price is the question most makers ask, and the answer depends on the laser type, the power, the work area and the features. This guide explains what sets the cost, then shows the sheets to cut.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Wesiti 10 Pieces Clear Acrylic Sheets Cast

Wesiti 10 Pieces Clear Acrylic Sheets Cast

Wesiti9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

10 clear cast acrylic sheets, 12 x 16 inches and 1/8 inch thick, with protective film.

Pros

  • Clear cast acrylic with a smooth, transparent surface and neat edges
  • 12 x 16 inch sheets suit larger signs and frames
  • 10 pieces cover display work as well as practice cuts
  • Protective film and double bubble rolls guard each sheet

Cons

  • No laser type is stated in the listing
  • No warranty term is stated
  • The film must come off before use, per the listing
MAITROVA Colored Cast Acrylic Sheets 7 Pack 8x8

MAITROVA Colored Cast Acrylic Sheets 7 Pack 8x8

Maitrova9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

7 colored cast acrylic sheets, 8 x 8 inches and 1/8 inch thick, for CO2 laser cutting.

Pros

  • Smooth work with CO2 lasers, engraving machines and hand tools
  • 7 bright colors for signs, badges, keychains and gift tags
  • Smooth, uniform cast acrylic with clean, crisp cuts
  • Double-sided protective film guards each sheet in shipping

Cons

  • 8 x 8 inch sheets suit small projects only
  • No warranty term is stated
  • No power or speed guidance is stated for the cut
  • 7 sheets in the pack, so a large batch needs extra packs
12 Piece 1/8 Thick 8 x 8 Inch 3mm Color Casting

12 Piece 1/8 Thick 8 x 8 Inch 3mm Color Casting

Ailaimiya9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

12 colored acrylic sheets, 8 x 8 inches, in 12 colors, with double-sided protective sheets.

Pros

  • 12 colors, including white, black, clear, red, yellow, blue, green, orange, purple, cyan, pink and rose
  • 12 pieces give the largest pack count in this guide
  • Double-sided kraft paper protects each board in transit
  • The film can stay on during laser cutting, per the listing

Cons

  • No laser type is stated in the listing
  • No warranty term is stated
  • 8 x 8 inch sheets suit small projects only

What Sets Acrylic Cutter Machine Price

Laser type leads the price. CO2 machines are the usual choice for cutting acrylic, and the Maitrova listing states its colored sheets work smoothly with CO2 lasers. Check the machine listing for the materials it cuts before comparing prices, since the material decides the type before the price does.

Power is another driver. A higher stated power cuts thicker sheet in fewer passes, while a lower stated power suits engraving and thin sheet. Compare the stated power against the sheet thickness before paying for power the work does not need.

Work area sets the sheet size the machine can take. The sheets in this guide measure 8 x 8 inches and 12 x 16 inches, so a bed that fits the larger sheet handles both. Bigger beds cost more, so match the bed to the work. For a closer look, see how much a laser cutter machine costs and the cost of a CO2 laser.

Features add the rest. An enclosed bed, air assist, autofocus and a rotary each add cost, so compare what ships in the box.

Match the Machine to the Work

Start from the project, not the machine. Signs, gift tags, keychains and small decor all cut well from the sheets in this guide, and the sheet size decides the bed size. Wedding signs from 12 x 16 inch sheets need a bed that fits that sheet, while keychains from 8 x 8 inch sheets fit a smaller bed.

Sheet thickness matters too. The Maitrova and Wesiti sheets (on Amazon) state 1/8 inch thick, or 3 mm, while the Ailaimiya bullets state 0.1 inch, or 2.7 mm to 3.0 mm. The acrylic thickness comparison shows how a small change in thickness changes the cut. The sheets here are cast acrylic, and the Maitrova listing states its cast sheets work smoothly with CO2 lasers.

Acrylic Sheets to Cut With Your Machine

Once the price question is settled, the cutting starts with the sheet. The Maitrova and Wesiti packs state 1/8 inch thick sheets, and the Ailaimiya bullets state 0.1 inch, so the choice comes down to sheet size, color range and pack count.

Cutting Acrylic Cleanly

Acrylic cutting makes smoke and fine dust, so ventilation matters as much as the machine. Vent the fumes outdoors or through a filter made for laser fumes, and keep a suitable extinguisher within reach. Never leave a running job unattended, and never laser PVC, vinyl, PVC-based faux leather, polycarbonate or ABS.

Protective film needs a decision per pack. The Wesiti listing asks for the film to come off before use, while the Ailaimiya listing states the film can stay on during laser cutting and come off after the job. Follow the listing for the sheets in hand.

FAQ: lasers and CNC

What sets acrylic cutter machine price?

Laser type, stated power, work area and included features set the price. Compare them against the material and the sheet size the work needs.

What sheet sizes do the packs in this guide come in?

The packs come in 8 x 8 inches and 12 x 16 inches: Maitrova and Ailaimiya are 8 x 8 inches, and Wesiti is 12 x 16 inches.

How thick are the sheets?

The Maitrova and Wesiti packs state 1/8 inch thick, or 3 mm. The Ailaimiya title states 1/8 inch, but its bullets state 0.1 inch, or 2.7 mm to 3.0 mm, while its spec table states 1.32 inches, so measure a sheet before cutting.

How many sheets come in each pack?

The Maitrova pack holds 7 sheets, the Ailaimiya pack holds 12 sheets, and the Wesiti pack holds 10 sheets.

Do the sheets arrive with protective film?

Yes. Each sheet in every pack arrives covered to guard against scratches in shipping. Maitrova and Ailaimiya state covering on both sides, while the Wesiti listing states a protective film.

Do these sheets cut on a CO2 laser?

The Maitrova listing states its sheets work smoothly with CO2 lasers. The other listings state no laser type, so check the machine listing before cutting.

Related: how much a laser cutter machine costs, the cost of a CO2 laser and acrylic sheets for laser projects. Also see acrylic vs wood for laser cutting.

More buying guides

Engraving Materials ·

Can You Cut Acrylic With a Laser Cutter?

Yes, acrylic sheets cut cleanly with a laser, and this guide shows which sheets to pick, how to keep the cut clean and what…