Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Laser Engraver Wattage Chart: Power for Each Material

Match laser wattage to the material with a chart built from rated cut depths, then see the machines that cover each power level.

Laser Engraver Wattage Chart: Power for Each Material
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1xTool X1 55W CO2 + 20W Diode Galvo Laser EngraverxTool X1 55W CO2 + 20W Diode Galvo Laser Engraver9.7/10View on Amazon
  2. 2Dual Laser Engraver with 12W Diode & 1W IR LaserDual Laser Engraver with 12W Diode & 1W IR Laser9.6/10View on Amazon
  3. 3LASER TREE 20W Laser Engraver & CutterLASER TREE 20W Laser Engraver & Cutter9.6/10View on Amazon
  4. 4Genmitsu 1064nm Infrared Laser ModuleGenmitsu 1064nm Infrared Laser Module9.5/10View on Amazon

A sign maker staring at a blank board, a jeweler lining up metal tags, a leather worker cutting patches: each asks the same question before buying, which is how much power the job really needs. A laser engraver wattage chart answers that question by matching power to material and job, so the machine fits the work instead of the other way around. This guide builds the chart from rated cut depths and stated power figures, then shows the gear that covers each level.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

xTool X1 55W CO2 + 20W Diode Galvo Laser Engraver

xTool X1 55W CO2 + 20W Diode Galvo Laser Engraver

xTool9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 55W CO2 and 20W diode galvo machine with a 24.2 x 12.6 in bed and Class 1 safety. It covers the 55W row of the chart for large signs, decor and batch work.

Pros

  • 55W CO2 cutting plus 20W diode galvo engraving at up to 6,000 mm/s
  • 24.2 x 12.6 in work area handles larger signs and decor
  • Triple cameras position material, with smart nesting and batch fill
  • Class 1 enclosed design with multi-layer protection and fire-safety features

Cons

  • Fiber, MOPA and UV modules are optional add-ons, not included
  • 39.37 x 22.83 x 16.53 in body needs a large bench
  • The 6,000 mm/s top speed is for galvo engraving, not CO2 cutting
  • Cutting with CO2 needs ventilation and fire-safety planning
Dual Laser Engraver with 12W Diode & 1W IR Laser

Dual Laser Engraver with 12W Diode & 1W IR Laser

Carverall9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An enclosed dual-light 12W diode plus 1W infrared engraver with a 3.94 x 3.94 in bed. It covers the 12W engraving row and the 1W metal-marking row of the chart.

Pros

  • 12W blue diode plus 1W infrared covers wood, leather, acrylic, glass and bare metal
  • HD camera places designs with 0.01 mm precision
  • Fully enclosed Class 1 design with lid-open stop and tilt shutoff
  • Built-in air assist and exhaust fan for fume control

Cons

  • 3.94 x 3.94 in work area fits small items only
  • Cuts 4 mm plywood and 3 mm acrylic, so thicker stock is out of reach
  • The 1W infrared head engraves metal; it does not cut metal
  • Roller attachment for tumblers and the MD2 air purifier are optional extras
LASER TREE 20W Laser Engraver & Cutter

LASER TREE 20W Laser Engraver & Cutter

LASER TREE9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20W optical-power diode cutter with a 400 x 800 mm bed and a rated 10000 mm/min top speed. It covers the 20W cutting rows of the chart for plywood and acrylic.

Pros

  • 20W real optical power cuts 10 mm plywood and 8 mm acrylic in a single pass
  • 400 x 800 mm bed fits large signs and batch runs
  • Rated 10000 mm/min top speed
  • Air assist included, with LightBurn and LaserGRBL support

Cons

  • Class 4 open design needs more safety care than an enclosed Class 1 machine
  • 31.5 x 31.75 x 5.87 in body needs a large bench
  • Bare metal engraving is not in the stated material list
  • Open frame leaves fume control to the workspace
Genmitsu 1064nm Infrared Laser Module

Genmitsu 1064nm Infrared Laser Module

Genmitsu9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1W 1064 nm infrared module that adds direct metal marking to Genmitsu Kortek and Kiosk engravers. It covers the 1W metal-marking row of the chart.

Pros

  • 1064 nm infrared marks stainless steel, aluminum and brass directly
  • 0.05 x 0.05 mm spot with 0.01 mm accuracy for fine detail
  • Plug-and-play fit for Genmitsu Kortek and Kiosk engravers
  • Built-in cooling fan and a 10,000+ hour service life

Cons

  • A module, not a standalone engraver: it needs a Kortek or Kiosk machine
  • 1W power marks metal; it does not cut material
  • No warranty term is stated
  • Wood is not in the stated material list

Laser Engraver Wattage Chart by Material

Read the power column as optical output, the power at the material.

Material and job Power What the maker rates it to do
Plywood, cut 20W optical 10 mm in a single pass, LASER TREE K1 Mini 20W
Plywood, cut 12W diode 4 mm, Carverall A1 Pro 12W
Acrylic, cut 20W optical 8 mm in a single pass, LASER TREE K1 Mini 20W
Acrylic, cut 12W diode 3 mm, Carverall A1 Pro 12W
Bare metal, marking 1W infrared Stainless steel, aluminum and brass, Genmitsu 1064nm IR 1W and Carverall 1W infrared
Wood, leather, acrylic, glass, fabric, engraving 12W diode Carverall A1 Pro 12W, with a 3.94 x 3.94 in bed
Large signs, decor and batch work 55W CO2 plus 20W diode galvo xTool X1, 24.2 x 12.6 in bed, galvo engraving at up to 6,000 mm/s

How to Read the Chart

Always separate optical output from electrical input: the LASER TREE lists 20W real optical power, and the Genmitsu module (on Amazon) lists 1W (1000mW).

Work area and speed shape the choice as much as power does. The LASER TREE bed measures 400 x 800 mm, the xTool X1 (on Amazon) bed measures 24.2 x 12.6 in, and the Carverall bed measures 3.94 x 3.94 in. The LASER TREE lists 10000 mm/min, the Carverall lists 15000 mm/min, and the xTool X1 lists 6,000 mm/s for galvo engraving.

Cutting needs fire and ventilation planning: exhaust fumes outdoors or use a filter made for laser fumes, keep a suitable extinguisher within reach, and never leave a running job unattended. Never laser PVC, vinyl, PVC-based faux leather, polycarbonate or ABS. Eye protection only counts when the eyewear states an optical density and a wavelength range that matches the laser.

Laser Engravers That Match the Chart

Each machine below covers a row of the chart above, so match the job to the row first, then the machine.

FAQ: lasers and CNC

What wattage laser engraver do I need for plywood?

The Carverall A1 Pro 12W (on Amazon) cuts 4 mm plywood, and the LASER TREE K1 Mini 20W cuts 10 mm plywood in a single pass, both rated figures from the makers. Pick the row that matches the thickest stock the work calls for.

Can a 20W diode laser cut acrylic?

The LASER TREE K1 Mini 20W is rated to cut 8 mm acrylic in a single pass, while the Carverall A1 Pro 12W cuts 3 mm acrylic. Both figures are the makers’ rated figures for those machines.

What wattage marks bare metal?

1W infrared. The Genmitsu 1064 nm module and the Carverall 1W infrared head both mark stainless steel, aluminum and brass, and the Genmitsu spot measures 0.05 x 0.05 mm with 0.01 mm accuracy.

What is the difference between optical output and input power?

Optical output is the power of the beam at the material; input power is the electrical draw. The LASER TREE lists 20W real optical power, and a machine that gives only an input figure does not state its output.

Related: the laser engraver hub, best laser engraver for small business and best laser engraver for wood. Also see the how to choose a laser engraver guide and best laser engraver for metal.

More buying guides