Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Xtool D1 vs F1: Which One Should You Buy?

A lens pack for D1 modules and a slide extension for F1 machines, compared on stated area, clamps, compatibility and warranty.

Xtool D1 vs F1: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1xTool Slide Extension for F2/F1/F1 LitexTool Slide Extension for F2/F1/F1 Lite9.5/10View on Amazon
  2. 2Copkim 10 Pcs 14 mm Laser Protective LensesCopkim 10 Pcs 14 mm Laser Protective Lenses9.4/10View on Amazon

A maker planning signs, tumblers, leather patches and cut parts wants a laser setup that stays clear and steady across a long run of work. When a lens clouds or a work area feels cramped, the project slows and the finish suffers. The choice here is not between machines, but between the small parts that keep a setup running and the parts that stretch what a setup can hold.

xtool d1 vs f1 compares a lens pack linked to D1 modules with a slide extension linked to F1 machines. The lens pack keeps spare protection on hand for a diode module, while the slide extension widens the working area and holds material with clamps for batch work. Neither listing is a complete engraver.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Verdict: pick the slide extension for batch work across a wider stated area with clamps holding material in place. Pick the lens pack for spare diode module lenses in a stated pack size, with a housing diameter to confirm before ordering. Neither listing states a laser class, so neither side wins on safety here.

Machines on the list

xTool Slide Extension for F2/F1/F1 Lite

xTool Slide Extension for F2/F1/F1 Lite

xTool9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A slide extension for F1, F2 and F1 Lite machines that expands the working area to 115*400mm and holds material with 5 clamps.

Pros

  • Expands the working area to 115*400mm for batch work
  • 5 clamps hold edges and shapes in place
  • Manual and auto focus plus outline and frame preview with XCS software
  • Auto-switch between diode and infrared lasers for wider material work

Cons

  • No laser class, safety certification or eye protection figure is stated
  • No cut depth or speed figure is stated for the extension itself
  • Needs an F1, F2 or F1 Lite machine; it is an extension, not a complete engraver
  • Material claim is generic at 300+ materials, with no specific material list stated
Copkim 10 Pcs 14 mm Laser Protective Lenses

Copkim 10 Pcs 14 mm Laser Protective Lenses

Copkim9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pack of 10 silicon dioxide protective lenses, 14 mm in diameter, for D1, D1 Pro and M1 Series diode modules.

Pros

  • 10 pieces give spare lenses on hand
  • Silicon dioxide lenses resist scratches and breakage, per the listing
  • Double sided 450 nm transmittance enhancement film for light transmittance
  • Fits modules with a 14 mm lens housing, including D1, D1 Pro and M1 Series models named in the title

Cons

  • Not compatible with the D1 Pro 40W module or carbon dioxide laser engraving machines
  • No warranty term is stated
  • No laser class, OD or eye protection claim is stated; this is a module lens, not stated eyewear

Other machines to compare

xtool d1 vs f1 Side by Side

Product HQ Score Laser type Workspace Warranty
xTool Slide Extension 9.5/10 Diode and infrared 115*400mm 1 Year
Copkim 14 mm Lens Pack 9.4/10 Diode Not stated Not stated

Specs are what each manufacturer publishes as its rating on the listing, collected 4 November 2026.

Laser power and cutting

The Copkim listing names 10W and 20W diode modules in its title and says the lenses are not compatible with the D1 Pro 40W module. The lenses carry a double sided 450 nm transmittance enhancement film for light transmittance. The slide extension listing states no watt figure for the extension itself, so no power claim is made for it here. It describes auto-switch between diode and infrared lasers as part of the host machine workflow. Neither listing gives a cut depth, so cut depth is Not stated for both sides.

Workspace

The slide extension expands the working area to 115*400mm for larger engraving and bigger project cutting in batches, holding material with 5 clamps for edges and shapes. The lens pack has no workspace of its own. Its stated size is a lens diameter of 0.55 inch / 14 mm and a thickness of 0.04 inch / 1 mm, a fit check against the module housing.

Materials

The slide extension listing claims engraving and cutting across 300+ materials, with no specific material list stated, so no single work material is promised here. The lens pack listing states a lens material, silicon dioxide, and no work material list. The extension is about holding and covering work, while the lens pack is about keeping a module lens clear. Never laser PVC or vinyl. For background on diode machines, see the diode vs CO2 guide.

Software and ecosystem

The slide extension listing names XCS software, with scale rulers to assist placement, manual and auto focus, and outline and frame preview, described as working the same way as on the host F1 machine. The lens pack listing states no software, which fits a spare part. A buyer planning batch work should weigh that software workflow against the lens pack, which adds no workflow beyond a replacement part.

Safety and enclosure

Neither listing states a laser class, an interlock, an e-stop, flame detection, or a filtered window. The Copkim listing describes a protective lens for the laser module, not eyewear, and states no OD and no wavelength range for eye protection. The slide extension clamps hold material in place but are not a safety certification. Stay with the machine while it runs and keep smoke moving away from the work area.

Ventilation

Neither listing states ventilation or fume guidance, so ventilation is Not stated for both sides. Engraving still makes smoke, so plan venting or extraction before a long batch. See the fume extractor guide.

Add-ons and growth

The slide extension listing includes extension mini USB cables, 5 material clamps, a screwdriver and a manual, so the pack covers fitting and holding work from the start. Its growth path is batch size: a wider area and clamped material for repeated pieces. The lens pack grows through spares: 10 pieces on hand means a clouded lens can be swapped without waiting for a fresh order. The listing notes that protective lenses require regular cleaning.

Support and warranty

The slide extension listing states a 1 Year warranty. The lens pack listing states no warranty term, so warranty is Not stated for that side. That contrast is the whole support story the listings publish.

Choose the xTool Slide Extension if

  • You want batch work across a stated 115*400mm area.
  • You want material held by 5 clamps while pieces run.
  • You want XCS framing and focus support from the extension listing.

Choose the Copkim 14 mm Lens Pack if

  • You want spare lenses for a diode module with a 14 mm lens housing.
  • You value silicon dioxide lenses with a 450 nm film, per the listing.
  • You want a pack of 10 pieces on hand for replacements.
Safety

Neither listing states a laser class, so treat enclosure and eye protection as unstated and check the host machine listing before running work. Never laser PVC or vinyl. Stay with the machine while it runs, keep smoke moving away from the work area, and keep a fire extinguisher nearby.

Project Match

  • Batch engraving across a wider area: the slide extension, with a stated 115*400mm area and 5 clamps.
  • Spare lens stock for a diode module: the lens pack, with 10 pieces and a 14 mm diameter.
  • Work across diode and infrared lasers: the slide extension listing, which describes auto-switch between diode and infrared lasers.
  • Specific work materials: Not stated beyond the slide claim of 300+ materials.

FAQ: lasers and CNC

Can the Copkim lenses fit a D1 Pro 40W module?

No. The listing says the lenses are not compatible with the D1 Pro 40W module or with carbon dioxide laser engraving machines. Confirm the 14 mm lens housing before ordering.

Does the slide extension enlarge the F1 work area?

Yes, per the listing. It expands the working area to 115*400mm and is described as suited to batch work with clamped material.

Does either listing state eye protection?

No. The Copkim listing describes a protective lens for the laser module, not eyewear, and neither listing states an OD or a wavelength range for eye protection.

Which accessory suits batch work?

The slide extension suits batch work, with a wider stated area and 5 clamps. The lens pack suits keeping spares on hand, with 10 pieces for replacement.

What warranty does each listing state?

The slide extension listing states a 1 Year warranty. The lens pack listing states no warranty term, so warranty is Not stated for the lens pack.

Related: how to choose a laser engraver and best laser engraver for beginners.

More buying guides

Laser Engravers ·

Xtool M2 vs P2: Which One Should You Buy?

The P2 side lists a complete 55W machine bundle while the M2 side lists accessories only, compared on power, work area, fume parts and…