Best Teflon Sheet for Heat Press (2026): 5 Picks Compared
Five PTFE sheets and paper for heat press work, compared by size, pack, heat resistance and reuse for HTV, sublimation and heat transfer.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best for Auto PressTransOurDream 16×209.6/10View on Amazon - 2
Best 12 x 16 in PackYRYM HT PTFE Sheets9.6/10View on Amazon - 3
Best for ReuseSelizo Teflon Sheet9.6/10View on Amazon - 4
Best Mix PackTransOurDream Mix Pack9.4/10View on Amazon
A stack of blank tees, a fresh HTV design and a heat press warmed up: the last thing the job needs is vinyl sticking to the platen or ink bleeding onto the next shirt. The best teflon sheet for heat press sits between the platen and the garment, keeping the heat even and the mess off the machine, and this guide compares PTFE sheets and paper for heat transfer, sublimation and HTV by size, pack, heat resistance and reuse.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best for Auto Press TransOurDream 16×20: 16 x 20 in sheets in a 4 pack, sized for a 15 x 15 in automatic heat press, heat resistant up to 600°F. Check price on Amazon
- Best 12 x 16 in Pack YRYM HT PTFE Sheets: 3 pack of 12 x 16 in sheets, heat resistant up to 600°F, non-stick and tear-proof. Check price on Amazon
- Best for Reuse Selizo Teflon Sheet: 4 pack of glass fiber sheets, heat resistant up to 600°F and reusable up to 1000 times. Check price on Amazon
- Best Mix Pack TransOurDream Mix Pack: 30 sheets in two sizes, 16 x 11.7 in and 8.5 x 11 in, for heat transfer, sublimation and HTV. Check price on Amazon
Machines on the list

TransOurDream PTFE Teflon Sheets, 16 x 20"
A 4 pack of 16 x 20 in PTFE sheets for a 15 x 15 in automatic heat press, heat resistant up to 600°F, reusable and washable.
Pros
- 16 x 20 in sheets fit a 15 x 15 in automatic press
- Heat resistant up to 600°F
- High-density, smooth and durable surface
- Reusable, washable and cut to any size
Cons
- No warranty term stated
- No safety listing stated
- L size only in this pack
- No weight stated in the listing

YRYM HT PTFE Teflon Sheets for Heat Press
A 3 pack of 12 x 16 in black PTFE sheets, heat resistant up to 600°F, non-stick and tear-proof for heat press, baking and ironing.
Pros
- 12 x 16 in sheets in a 3 pack
- Heat resistant up to 600°F
- Non-stick and tear-proof
- Wipes clean after glue, wax or clay
Cons
- No warranty term stated
- No safety listing stated
- Black color only in this pack
- Bullets call the sheets paper as well as PTFE

Selizo 4 Pack Teflon Sheet for Heat Press
A 4 pack of glass fiber Teflon sheets, heat resistant up to 600°F and reusable up to 1000 times, for heat press, oven liners and ironing.
Pros
- Glass fiber, heat resistant up to 600°F
- Reusable up to 1000 times
- Usable on both sides
- 4 pack, 2 sheets per roll
Cons
- Title says 12 x 16 in, a bullet says about 16 x 20 in
- No warranty term stated
- No safety listing stated
- No thickness stated in the listing

3 Pack Teflon Sheet For Heat Press
A 3 pack of 12 x 16 in fiberglass fabric sheets, heat resistant up to 600°F, thick, strong and tear-resistant, reusable on both sides.
Pros
- 12 x 16 in sheets in a 3 pack
- Heat resistant up to 600°F
- Fiberglass fabric, thick and tear-resistant
- Food grade PTFE, reusable on both sides
Cons
- No warranty term stated
- No safety listing stated
- Support within 24 hours is stated, but no warranty term is

TransOurDream 30 Pack PTFE Teflon Paper Mix Pack
A 30 pack of Teflon paper in two sizes, 20 sheets at 16 x 11.7 in and 10 sheets at 8.5 x 11 in, rated 200 to 230C for heat transfer and sublimation.
Pros
- 30 sheets in two sizes
- 20 sheets at 16 x 11.7 in, 10 sheets at 8.5 x 11 in
- Reusable up to 200 or more applications
- Cuts to any size or shape with scissors
Cons
- Teflon paper, not fabric, rated 200 to 230C only
- No warranty term stated
- No safety listing stated
Other machines to compare
White PTFE Sheet for Heat PressCheck price on Amazon
TransOurDream 3 PTFE Teflon SheetsCheck price on Amazon
HTVRONT PTFE Sheets for Heat PressCheck price on Amazon
YTFGGY 3 Pack Teflon Sheets for Heat Press 15x15 and 3 RollsCheck price on Amazon
Selizo 10 Pack PTFE Teflon Sheet for Heat Press 16" x 24" NonCheck price on Amazon
Specs compared
| Model | HQ Score | Size | Pack | Heat resistance | Material | Reusable |
|---|---|---|---|---|---|---|
| TransOurDream 16×20 | 9.6/10 | 16 x 20 in | 4 pack | Up to 600°F | High-density PTFE | Yes |
| YRYM HT PTFE Sheets | 9.6/10 | 12 x 16 in | 3 pack | Up to 600°F | PTFE | Yes |
| Selizo Teflon Sheet | 9.6/10 | 12 x 16 in | 4 pack | Up to 600°F | Glass fiber | Up to 1000 times |
| Ubrand Teflon Sheet | 9.5/10 | 12 x 16 in | 3 pack | Up to 600°F | Fiberglass fabric | Yes, both sides |
| TransOurDream Mix Pack | 9.4/10 | 16 x 11.7 in and 8.5 x 11 in | 30 pack | 200 to 230C | Teflon paper, wood pulp | 200 or more applications |
These numbers come straight from each maker’s listing and are rated, not measured by us (3 November 2026).
What the listings tell you
5 sheet listings were read for this guide. 4 are PTFE sheets or fabric rated up to 600°F, and 1 is Teflon paper rated 200 to 230C. 4 listings give a pack of 3 or 4 sheets, while the mix pack holds 30 sheets in two sizes. 2 listings contradict themselves on size, and none states a warranty term.
Buying guide: best teflon sheet for heat press
Sheet or paper
PTFE sheets and fiberglass fabric take heat up to 600°F, while Teflon paper made from wood pulp is rated 200 to 230C and suits medium and low temperature transfer. The mix pack here is paper, so match the heat limit to the press setting before the first run.
Size the sheet to the press
A 16 x 20 in sheet covers a 15 x 15 in automatic press with room to spare, while a 12 x 16 in sheet suits smaller presses and shirts. Cut any sheet to size with scissors, and trim the mix pack sheets to the shape of the transfer.
Reuse and cleaning
All five picks are reusable: the Selizo is rated up to 1000 times and the mix pack up to 200 or more applications, while the others state reuse without a count. Wipe glue, wax or clay off with a damp cloth after each use, and cut off a stained corner of paper rather than throwing the sheet away.
What to watch in the listing
Two listings in this guide contradict themselves on size, so read the title and the bullets before the spec table. The Selizo title says 12 x 16 in while a bullet says about 16 x 20 in, and the mix pack title says 16 x 11.7 in while the spec table says 11 x 17 in. When the numbers disagree, measure the sheet on arrival and cut to fit.
A heat press runs hot enough to burn skin and scorch fabric, so keep hands clear of the platen, let the press cool before moving it, and work in a ventilated space. Keep the sheets away from an open flame, and follow the press maker’s guidance for the material on the platen.
Project Match
- T-shirts and HTV: the TransOurDream 16 x 20 in sheets cover a 15 x 15 in automatic press, and the YRYM HT, Selizo and Ubrand 12 x 16 in sheets suit smaller presses.
- Sublimation: the TransOurDream sheets list sublimation paper, and the mix pack suits sublimation on ordinary clothing.
- Baking and oven liners: the YRYM HT sheets list baking, and the Selizo and Ubrand sheets list non-stick oven liners.
- Ironing: the YRYM HT, Selizo and Ubrand sheets list ironing protectors, and the mix pack can be cut to the shape of the transfer.
- Not stated: no listing here names leather patches or tumblers, so match the sheet to the press, not the project name.
How the scores add up
Each sheet is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None of the picks states a warranty term or a safety certification, so all score zero on safety and warranty.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| TransOurDream 16×20 | 9.6 | 30 | 21 | 20 | n/a | 0 |
| YRYM HT PTFE Sheets | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Selizo Teflon Sheet | 9.6 | 28 | 20 | 20 | n/a | 0 |
| Ubrand Teflon Sheet | 9.5 | 28 | 20 | 19 | n/a | 0 |
| TransOurDream Mix Pack | 9.4 | 23 | 18 | 21 | n/a | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.
FAQ: lasers and CNC
What is a teflon sheet for heat press?
A Teflon sheet for heat press is a non-stick PTFE sheet that sits between the heated platen and the garment, protecting the platen from ink and adhesive while letting heat through to the transfer. It also keeps the garment from sticking to the press.
Can you reuse a teflon sheet for heat press?
Yes. Every pick here is reusable: the Selizo is rated up to 1000 times, the mix pack up to 200 or more applications, and the other sheets state reuse without a count. Wipe the sheet with a damp cloth after each use and cut off a stained part of paper when ink marks it.
What size teflon sheet do I need for a heat press?
Match the sheet to the press: a 16 x 20 in sheet covers a 15 x 15 in automatic press, while a 12 x 16 in sheet suits smaller presses and shirts. All of the sheets here can be cut to size, so a larger sheet can be trimmed to fit.
Can a teflon sheet go in the oven?
Some listings here say yes: the YRYM HT sheets list baking, and the Selizo and Ubrand sheets list non-stick oven liners. Check the listing for the sheet you buy, since the TransOurDream sheets do not list baking or oven use.
Teflon sheet or Teflon paper: which one do I need?
Teflon sheets and fabric take heat up to 600°F, while Teflon paper made from wood pulp is rated 200 to 230C and suits medium and low temperature transfer. For high temperature work on metals, ceramics and glass, the listing states Teflon fabric rated 260C or higher. For ordinary clothing and plastic stationery, the paper in the mix pack is the listed fit.
Related: the best automatic heat press, the best heat press mat, the best heat transfer paper, the best heat transfer vinyl for Cricut and teflon sheet vs silicone heat press pad. Also see 15×15 vs 16×20 heat press, auto heat press vs clamshell, heat press vs iron, our craft machines hub, best sublimation ink and paper, best t-shirt heat press machine and laser engraver vs heat press.



