Polycarbonate vs Glass Safety Glasses: Which One Should You Buy?
Four polycarbonate safety glasses compared on impact, weight, fog and UV protection, with no glass-lens pair in the set.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
OXG 12 Pack Safety Glasses9.8/10View on Amazon - 2
Walker's Sport High-Grade Polycarbonate Lenses Half FrameView on Amazon - 3
Salfboy Clear Safety Glasses Bulk Ansi Z87.1 Scratch ImpactView on Amazon - 4
3M Safety GlassesView on Amazon - 5
Pyramex Endeavor Plus Safety Glass Black/Gray FrameView on Amazon - 6
DEWALT DPG96-2Csafety-Masks Router Safety GlassesView on Amazon - 7
IR 5.0 Welding Safety Glasses for DIY Welder Anti-scratchView on Amazon
For the shop work covered here, polycarbonate is the only lens material with stated figures: the four pairs list impact protection, and anti-fog coatings appear on Ergodyne and MAGID only. No glass-lens pair appears in this set, so the glass side has no stated figures to compare here. For polycarbonate vs glass safety glasses, the answer from the listings is to pick polycarbonate for impact protection, and to shop elsewhere for a glass lens, since this set offers none.
Other machines to compare
Walker's Sport High-Grade Polycarbonate Lenses Half FrameCheck price on Amazon
Salfboy Clear Safety Glasses Bulk Ansi Z87.1 Scratch ImpactCheck price on Amazon
3M Safety GlassesCheck price on Amazon
Pyramex Endeavor Plus Safety Glass Black/Gray FrameCheck price on Amazon
DEWALT DPG96-2Csafety-Masks Router Safety GlassesCheck price on Amazon
IR 5.0 Welding Safety Glasses for DIY Welder Anti-scratchCheck price on Amazon
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
All four pairs in this guide use polycarbonate lenses. No glass-lens pair appears in the set, and none of the four listings states an optical density or a wavelength range, so none of these pairs counts as laser eyewear. Use them for shop eye protection, not for looking at a running laser.
Polycarbonate vs glass safety glasses: what the listings show
Every pair in this set uses a polycarbonate lens. TICONN, Ergodyne, MAGID and BISON LIFE all list polycarbonate, and all four list ANSI Z87.1 impact protection in some form. The listings give a clear picture of the polycarbonate side: impact resistance, light frames and scratch-resistant coatings, with anti-fog coatings on Ergodyne and MAGID, plus UV figures from TICONN, Ergodyne and MAGID. The glass side has no listing at all, so a buyer who wants a glass lens needs a different listing, while a buyer who wants polycarbonate can compare the four pairs below on stated figures alone.
Impact protection and standards
Impact protection is the strongest shared point. TICONN lists durable polycarbonate lenses for flying debris, wood chips and metal shavings, and states ANSI Z87.1. MAGID states ANSI Z87.1+ high-impact compliance and CSA Z94.3, with polycarbonate lenses and integrated side shields. BISON LIFE states ANSI Z87.1 and a wraparound lens with deep side temples for side shield protection. Ergodyne states ANSI/ISEA Z87.1-2020 with the Z87+ mark, plus CSA Z94.3 and integrated side shields that preserve peripheral vision.
Side shields matter because debris rarely arrives straight on. MAGID lists permanent side shields, and Ergodyne lists integrated side shields, and BISON LIFE builds the side protection into the wraparound lens and deep side temples. TICONN does not list side shields. For work with flying chips and shavings, a pair with side shields covers more angles than a plain front lens.
Weight, fit and fog
The stated weights in the set are light. BISON LIFE lists 0.1 pounds, and MAGID describes a flexible black nylon frame that weighs just ounces, with soft gray temple pads. TICONN lists a lightweight one-size design for most adult face shapes, and Ergodyne lists a contoured nose bridge with soft temple pads. TICONN, Ergodyne and BISON LIFE all describe a one-size fit.
Fog is the other comfort issue. Ergodyne lists Fog-Off+ anti-fog that exceeds ANSI/ISEA Z87.1-2020 and EN166 anti-fog requirements, and MAGID lists anti-fog polycarbonate lenses for temperature changes and humidity. TICONN and BISON LIFE list no anti-fog coating. For work that moves between cold and warm air, the Ergodyne or MAGID anti-fog coating is the better pick.
UV protection
UV figures differ across the set. Ergodyne and MAGID both list 99.9% UV protection, with Ergodyne naming UVA, UVB and UVC. TICONN lists UV400 protection. BISON LIFE lists UV protection with no figure, so its UV claim has no number attached. For outdoor work, Ergodyne and MAGID both state a 99.9% UV figure, while TICONN states UV400 protection.
The four polycarbonate picks
| Glasses | Lens | Standards | UV protection | Pack |
|---|---|---|---|---|
| Ergodyne Skullerz SIXTEN | Smoke polycarbonate | ANSI/ISEA Z87.1-2020, CSA Z94.3 | 99.9% UVA, UVB, UVC | 1 pair |
| MAGID Y50 | Clear polycarbonate | ANSI Z87.1+, CSA Z94.3 | 99.9% | 1 pair |
| BISON LIFE Crystal | Clear polycarbonate | ANSI Z87.1 | UV protection, no figure | 12 pack |
| TICONN Clear Safety Glasses | Clear polycarbonate | ANSI Z87.1 | UV400 | 12 pack |
Ergodyne Skullerz SIXTEN
The Skullerz SIXTEN is the most fully specified pair in the set. It lists ANSI/ISEA Z87.1-2020 with the Z87+ mark, CSA Z94.3, and Fog-Off+ anti-fog that exceeds ANSI/ISEA Z87.1-2020 and EN166 anti-fog requirements, plus EN166 scratch resistance. The smoke lens filters 99.9% of UVA, UVB and UVC rays, and the frame has integrated side shields, a contoured nose bridge and soft temple pads. A protective microfiber bag is included, and the pair fits an Ergodyne Skullerz elastic retainer strap sold separately.
MAGID Y50
The Y50 is a single pair with clear polycarbonate lenses, a black nylon frame and integrated side shields. It states ANSI Z87.1+ high-impact compliance and CSA Z94.3, with anti-fog and scratch-resistant coatings and 99.9% UV protection. It measures 5.5 by 6.0 by 2.0 inches, and each pair ships with a protective wiper case with a microfiber interior.
BISON LIFE Crystal
The Crystal is a 12 pack of wraparound glasses with clear polycarbonate lenses and an anti-scratch coating. It states ANSI Z87.1, lists 0.1 pounds, and measures 1.75 by 5.75 by 1.75 inches. Deep side temples give built-in side shield protection with 180-degree eye protection, and the listing states a Life Time Warranty. The 12 pack suits a crew, a classroom or a lab that needs spares.
TICONN Clear Safety Glasses
The TICONN pair comes as a 12 pack of clear safety glasses with polycarbonate lenses. It states ANSI Z87.1, UV400 protection and scratch-resistant lenses, with a lightweight one-size design. The listing names construction, cycling, yard work and lab use. It lists no side shields and no anti-fog coating, so it is the plainest pair in the set.
How to choose
Start with the standard. Every pair here states ANSI Z87.1 in some form, so the choice turns on coatings and extras. If fog is a problem, Ergodyne or MAGID state anti-fog coatings. If the work is outdoors, Ergodyne and MAGID both state a 99.9% UV figure, while TICONN states UV400 protection. For a crew, the BISON LIFE or TICONN 12 pack keeps spares.
Check the laser question separately. None of these listings states an optical density or a wavelength range, so none of them is laser eyewear. For laser work, use eyewear only if its listing states an optical density and a wavelength range that matches the machine. See the laser safety glasses guide and how to choose laser safety glasses before buying for laser use.
Common mistakes to avoid
- Buying generic safety glasses for laser work. None of these pairs states an optical density or wavelength range.
- Skipping side shields on work that throws chips sideways. Ergodyne, MAGID and BISON LIFE list side protection; TICONN does not.
- Ignoring fog. Moving between cold and warm air fogs plain lenses, and only Ergodyne and MAGID list anti-fog coatings.
- Assuming every UV claim carries a figure. BISON LIFE lists UV protection with no number, while Ergodyne and MAGID list 99.9%.
- Ordering one pair for a whole crew. BISON LIFE and TICONN come as a 12 pack for shared benches.
Polycarbonate vs glass safety glasses: the short version
- Pick polycarbonate for impact protection, since it is the only lens material in this set.
- Choose Ergodyne or MAGID for anti-fog coatings and a 99.9% UV figure.
- Choose BISON LIFE or TICONN for a 12 pack that stocks a crew or classroom.
- Look elsewhere for a glass lens: this set offers none.
- For laser work, buy eyewear only with a stated optical density and wavelength range.
FAQ: lasers and CNC
Are polycarbonate safety glasses good for laser engraving?
Not on their own. None of the four listings states an optical density or a wavelength range, so none counts as laser eyewear.
Which safety glasses in this guide have anti-fog coatings?
Ergodyne lists Fog-Off+ anti-fog, and MAGID lists anti-fog polycarbonate lenses. TICONN and BISON LIFE list no anti-fog coating.
What UV protection do these safety glasses offer?
Ergodyne and MAGID both list 99.9% UV protection, TICONN lists UV400 protection, and BISON LIFE lists UV protection with no figure.
Do these safety glasses meet ANSI Z87.1?
All four list ANSI Z87.1 in some form: Ergodyne lists ANSI/ISEA Z87.1-2020 with the Z87+ mark, MAGID lists ANSI Z87.1+, and TICONN and BISON LIFE list ANSI Z87.1.
Are these safety glasses sold in bulk packs?
TICONN and BISON LIFE come as a 12 pack. Ergodyne and MAGID come as a single pair, with a wiper case from MAGID and a microfiber bag from Ergodyne.
Related: the laser safety hub, laser safety glasses vs regular safety glasses and best safety glasses for laser engraving. Also see the anti fog vs anti scratch safety glasses. Also see the laser engraver safety checklist.




