Blue Laser Safety Glasses: How to Choose
How to pick blue laser safety glasses that state an optical density and a wavelength range matching the laser, with two pairs compared.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
190nm-490nm OD 6+ Laser Safety Eye Protection9.6/10View on Amazon - 2
2 SET Goggles Laser Safety Glasses 190nm to 540nm9.4/10View on Amazon
Blue laser safety glasses are eyewear made to block specific blue wavelengths, and the pair to buy is the one whose listing states an optical density and a wavelength range that covers the laser’s wavelength. A tinted lens without a stated optical density and wavelength range cannot be checked for protection, no matter how dark it looks. The pairs below show what a stated range looks like, and the steps that follow explain how to match the figures to the machine.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Eyewear can only be checked for protection when its listing states an optical density and a wavelength range that matches the laser. A tinted lens with no stated optical density leaves its protection level unknown, even if it looks dark.

190nm-490nm OD 6+ Laser Safety Eye Protection
Laser safety goggles with OD 6+ absorption filtering for 190nm to 490nm violet and blue lasers, 55% visible light transmission and an over-glasses frame.
Pros
- OD 6+ value attenuates laser light from 190nm to 490nm violet and blue beams
- 55% visible light transmission provides a clear view of the workpiece during laser cutting
- Relaxed fit is designed to fit over standard prescription eyewear
- Includes a dedicated protective storage case and absorptive filtering lenses
Cons
- No warranty term is stated
- Does not state an EN207 or CE certification standard in the listing
- Covers up to 490nm only, offering no protection against fiber or CO2 laser beams
- Acrylic lens material rather than scratch-resistant mineral glass

2 SET Goggles Laser Safety Glasses 190nm to 540nm
Two pairs of red protective glasses covering 190nm to 540nm with 55% visible light transmission and velvet storage boxes.
Pros
- Two pairs included in the package, each with its own velvet storage box
- 55% visible light transmission provides clear workpiece illumination during engraving
- Protects against 190nm to 540nm wavelengths, covering 450nm blue diode beams
- Lightweight plastic construction weighing 18 g (0.63 ounces) per pair
Cons
- No warranty term is stated in the listing
- Optical density rating is not stated
- Does not protect against 1064nm fiber or 10.6um CO2 laser wavelengths
- Listing categorizes item type as WATCH and lists multiple lens colors for red glasses
Read the optical density and the wavelength range
Start with the two figures that decide whether glasses protect: the optical density, written as OD, and the wavelength range in nanometers. The CARLANY states OD 6+ for a 190nm-490nm range, while the GOSONO states a 190nm to 540nm range with no OD figure. OD, optical density, states how strongly the lens attenuates light at the stated wavelengths, with a higher figure meaning stronger attenuation, so a pair that states a range but no OD leaves the protection level open. See the laser safety glasses vs regular safety glasses comparison for how laser eyewear differs from plain safety glasses.
Match the range to the blue wavelengths
The blue wavelengths named here, 405/445/450/473nm, sit inside both stated ranges. The CARLANY states them inside its 190nm-490nm range with OD 6+, and the GOSONO states a 190nm to 540nm range with no OD figure. Check the wavelength the laser uses, then check that the range on the glasses covers it: a range that stops short of the laser wavelength is not rated for that wavelength. See the blue vs green laser safety glasses comparison for how the colors differ.
Check fit, storage and a spare pair
Glasses only help when they are on, so fit and storage matter. The CARLANY is made to fit over prescription glasses, which suits wearers who need correction at the bench. The GOSONO ships as a 2-pack with a velvet box, so a spare pair stays stored at the machine. See the prescription laser safety glasses guide for fit options. Keep the spare pair where the laser runs, so eye protection is on hand when the first pair is not.
Blue laser safety glasses for the bench
The pairs below cover the wavelength check and the spare-pair step above: the CARLANY states OD 6+ for its 190nm-490nm range, and the GOSONO adds a second pair with a velvet box.
Common mistakes to avoid
- Buying tinted glasses with no stated OD figure.
- Buying a range that stops short of the laser wavelength, such as a range ending at 490nm for a laser past 490nm.
- Wearing glasses that do not fit over prescription glasses.
- Leaving the only pair in another room, with no spare at the machine.
FAQ: lasers and CNC
What does OD 6+ mean on laser safety glasses?
OD, optical density, states how strongly a lens attenuates light at the stated wavelengths: a higher OD figure means stronger attenuation. The CARLANY states OD 6+ for a 190nm-490nm range, and the GOSONO states no OD figure.
Which wavelengths do blue laser safety glasses need to cover?
The wavelengths the laser uses. The CARLANY is stated for 405/445/450/473nm blue wavelengths inside its 190nm-490nm range, and the GOSONO states a 190nm to 540nm range with no OD figure.
Can I wear laser safety glasses over prescription glasses?
The CARLANY is made to fit over prescription glasses. The GOSONO states no fit over prescription glasses.
Do I need a spare pair of laser safety glasses?
A spare pair keeps eye protection on hand when the first pair is not at the bench. The GOSONO ships as a 2-pack with a velvet box.
What if the glasses state a range but no OD?
The GOSONO states a 190nm to 540nm range with no OD figure. Without a stated OD, the protection level at those wavelengths cannot be checked from the listing, so pick a pair that states both.
Related: the laser safety hub, best laser engraver for small business and best laser engraver for wood and metal. Also see the fiber optic laser safety glasses guide and the laser safety face shield guide.




