Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Manual Leather Cutting Machine: A Practical Guide for Crafters

How a manual leather cutting machine works, with plate sizes, stated press force and stroke compared across four hand presses for leather projects.

Manual Leather Cutting Machine: A Practical Guide for Crafters
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR Leather Cutting Machine 14.17 x 10.24VEVOR Leather Cutting Machine 14.17 x 10.249.6/10View on Amazon
  2. 2VEVOR Leather Cutting MachineVEVOR Leather Cutting Machine9.6/10View on Amazon
  3. 3Flyrivergo 3 Ton Swing Arm Leather CuttingFlyrivergo 3 Ton Swing Arm Leather Cutting9.5/10View on Amazon
  4. 4Flyrivergo Acrylic Visual Leather Cutting MachineFlyrivergo Acrylic Visual Leather Cutting Machine9.4/10View on Amazon

A manual leather cutting machine is a hand press that drives a metal die through leather in one press, so repeated shapes come out the same size without tracing and cutting each piece by hand. You place the leather and die under the plate and pull the handle. The picks below differ in plate size, stated force and stroke.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

VEVOR Leather Cutting Machine 14.17 x 10.24

VEVOR Leather Cutting Machine 14.17 x 10.24

VEVOR9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hand press die cutter with a 14.17 x 10.24 in plate and 3300 lbs pressing force stated, for the cutting and embossing step.

Pros

  • Largest plate here at 14.17 x 10.24 in
  • 3300 lbs pressing force and 0.47 in stroke stated
  • Punching and embossing combined in one unit, as stated
  • Limit screws stated to help reduce handle rebound

Cons

  • No warranty term is stated
  • Heavy at 65.7 pounds, the heaviest here
  • Plate size still limits each cut to 14.17 x 10.24 in
  • No die set is stated as included
VEVOR Leather Cutting Machine

VEVOR Leather Cutting Machine

VEVOR9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A manual die cutter with an 11 x 5.5 in embossing plate and dual guide shafts stated, for cutting and embossing leather pieces.

Pros

  • Plate stated at 11 x 5.5 in (280 x 140 mm)
  • Load capacity stated at 3306 pounds (1.5 tons)
  • Adjustable stroke stated at 0.47 in (12mm)
  • Limiting screws stated to hold the handle and prevent rebound

Cons

  • No warranty term is stated
  • Heavy at 60.08 pounds
  • Plate width of 5.5 in limits wider pieces
  • No die set is stated as included
Flyrivergo 3 Ton Swing Arm Leather Cutting

Flyrivergo 3 Ton Swing Arm Leather Cutting

Flyrivergo9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A swing arm press with 3 tons of stated downward pressure and an 18-piece die set, for cutting thick leather in one press.

Pros

  • 3 tons (6,614 lbs) of maximum downward pressure stated
  • Swing arm stated to rotate out of the way for die alignment
  • 18-piece metal die set and carrying case stated as included
  • 1-year warranty stated

Cons

  • Small plate at 7.0 x 4.7 in
  • Heavy at 50.7 lbs for a small plate press
  • No stroke figure is stated
  • No limit screw or rebound feature is stated
Flyrivergo Acrylic Visual Leather Cutting Machine

Flyrivergo Acrylic Visual Leather Cutting Machine

Flyrivergo9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A manual die cutter with a clear acrylic plate at 7.87 x 7.87 in and 0.5 ton force stated, for aligning dies on thin leather.

Pros

  • Clear acrylic plate stated for visibility while aligning dies
  • Plate stated at 7.87 x 7.87 in
  • 18-piece metal die set and carrying case stated as included
  • 1 year warranty stated

Cons

  • Lowest stated force here at 0.5 tons (1102lbs)
  • Maker states it is not intended for thick veg-tan leather
  • Maker states best use is thin to medium leather up to 2oz
  • No weight figure is stated

How a manual leather cutting machine works

The cutting step has three parts: the die that carries the shape, the plate that spreads the force, and the handle that drives the plate down. Dual guide shafts on the VEVOR presses keep the plate moving straight, and limiting screws are stated to hold the handle and prevent rebound. The Flyrivergo swing arm press rotates the arm out of the way so the die can be positioned under the press head, and the Flyrivergo acrylic press uses a clear plate so the die position stays visible. See our die cutting machine guide for basics.

Plate size, force and stroke

Plate size sets the largest piece per press: 14.17 x 10.24 in, 11 x 5.5 in, 7.87 x 7.87 in and 7.0 x 4.7 in across these presses. Stated figures differ in kind: the swing arm press states 3 tons (6,614 lbs) of maximum downward pressure and the VEVOR 14.17 x 10.24 in press states 3300 lbs of pressing force, while the VEVOR 11 x 5.5 in press states a 3306 pounds (1.5 tons) load it can withstand and the acrylic press states it can endure 0.5 tons (1102lbs) of weight. Stroke is stated at 0.47 in on the VEVOR presses and up to 0.47 in (12mm) on the acrylic press.

Materials and thickness

Match the press to stated materials. The VEVOR 14.17 x 10.24 in press states leather, fabric and paper among its materials, and the VEVOR 11 x 5.5 in press states fabric leather, PVC/EVA foam, plastic and rubber sheets among its materials. The Flyrivergo acrylic press states best use with thin to medium leather up to about 2oz (0.8mm) and states it is not intended for thick veg-tan leather. The Flyrivergo swing arm press states 9mm+ thick full-grain vegetable-tanned leather and multiple layers. For smaller pieces, see our rotary cutter picks.

Gear for the cutting step

Each press below handles the die cutting step itself, pressing the die through the leather so shapes repeat cleanly.

FAQ: lasers and CNC

What does a manual leather cutting machine do?

It presses a metal die through leather with a hand lever, cutting the same shape each time. Plate sizes here run from 7.0 x 4.7 in to 14.17 x 10.24 in.

How much press force do these machines state?

The Flyrivergo swing arm press states 3 tons (6,614 lbs) of maximum downward pressure, and the VEVOR 14.17 x 10.24 in press states 3300 lbs of pressing force. The VEVOR 11 x 5.5 in press states a 3306 pounds (1.5 tons) load it can withstand, and the Flyrivergo acrylic press states it can endure 0.5 tons (1102lbs) of weight.

Can these presses emboss as well as cut?

The VEVOR 14.17×10.24 Press states punching and embossing in one unit, and the VEVOR 11 x 5.5 in Press states an embossing plate.

Which press states use with thick leather?

The Flyrivergo swing arm press states 9mm+ thick full-grain vegetable-tanned leather and multiple layers. The Flyrivergo acrylic press states best use with thin to medium leather up to about 2oz (0.8mm).

Do these presses include dies?

Both Flyrivergo presses state an 18-piece metal die set included. The VEVOR presses do not state a die set as included.

Related: the craft machines hub, manual die cutting machine and best rotary cutter for leather.

More buying guides

Sewing and Embroidery Machines ·

Manual Sewing Machine for Leather: What to Buy

Hand-operated cobbler machines for leather shoes, bags and goods, compared by stated weight, size, thread and extras, with who should skip each.

Craft Machines ·

Manual Heat Press Machine: How to Choose

A manual heat press machine uses hand-applied pressure to press a heated plate onto a transfer; this guide matches plate size, heat range, pressure…

Craft Machines ·

Manual Embossing Machine: Types and Uses

A manual embossing machine presses raised designs into paper or leather with a crank or lever; this guide covers the types, the sizes that…