Manual Embossing Machine: Types and Uses
A manual embossing machine presses raised designs into paper or leather with a crank or lever; this guide covers the types, the sizes that matter, and the machines matched to each job.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Leather Cutting Machine, 1.5 Ton Manual Press Die9.6/10View on Amazon - 2
CraftGenes Mini Die Cutting & Embossing Machine9.6/10View on Amazon - 3
VEVOR Leather Cutting Machine9.6/10View on Amazon - 4
Sizzix Big Shot Machine, 6" Die-Cutting9.4/10View on Amazon
A raised pattern pressed into paper or leather turns a plain card, wallet or book cover into a piece with a maker’s mark. A manual embossing machine makes that pattern with a crank or a lever, no power cord and no software. This guide explains the types, the sizes that matter and the materials each kind handles.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Leather Cutting Machine, 1.5 Ton Manual Press Die
A 1.5-ton manual lever press with a 5.9 x 3.9 in embossing plate, dual guide shafts and a 0.47 in pressure stroke for leather and other soft materials.
Pros
- 1.5 tons of pressure with dual guide shafts for a steady press
- 5.9 x 3.9 in embossing plate (150 x 100 mm)
- 0.47 in adjustable stroke handles materials of various thicknesses
- Manganese steel build with an anti-oxidation coating and roller bearings
Cons
- 5.9 x 3.9 in plate: smaller than the VEVOR plate named in this guide
- No warranty term stated
- Listing counts 10 items without naming each one
- Leather-first design: paper crafters get more from a crank machine

CraftGenes Mini Die Cutting & Embossing Machine
A manual crank die-cutting and embossing machine with a 3.5-inch feed slot and a 24-accessory starter kit for small paper projects.
Pros
- 3.5-inch feed slot takes paper up to 3 inches wide
- 24 accessories: 3 cutting plates, 3 embossing folders, 1 die set, 7 stamps and 10 cardstock sheets
- Built-in storage compartments and a top handle for storage and travel
- Manual crank with no cords or batteries
Cons
- Paper up to 3 inches wide only
- Not for oversized dies, laminated sheets or thick materials
- Small 5.9 x 5.9 x 3.15-inch body limits project size
- No warranty term stated

VEVOR Leather Cutting Machine
Manual leather die cutter, 10.2 x 5.9 in plate, 0.47 in stroke, 3306 lb load.
Pros
- Same 3306 lb load capacity and 0.47 in stroke as the larger VEVOR
- 10.2 x 5.9 in embossing plate for smaller leather pieces
- Dual guide shafts and limiting screws hold the handle steady
- Steel build with a black oxide coating resistant to rust and corrosion
Cons
- No warranty term in the listing
- Smaller plate than the 14.2 x 10.2 in VEVOR
- Weight is not stated in the listing
- The listing does not state which dies are included

Sizzix Big Shot Machine, 6" Die-Cutting
A 6 inch die-cutting and embossing machine, machine only, with a Multipurpose Platform and Cutting Pads included and a clip-on handle.
Pros
- Multipurpose Platform and Cutting Pads included in the listing
- Clip-on handle stores underneath the machine when not in use, per the listing
- Covers cardmaking, scrapbooking, larger papercraft and home decor projects, per the listing
- Redesigned look with the same trusted performance described in the listing
Cons
- Listing states No Warranty
- Machine only: dies, embossing folder and cardstock are not included in this listing
- Heavier than the Genron pick at 8.8 pounds
- No safety certification is stated
What a manual embossing machine does
A manual embossing machine presses a raised design into a surface by squeezing the material between a die or folder and a plate. A crank machine feeds a stack of plates through rollers; a lever press pushes a flat plate down onto the material. Either way the work is done by hand.
Paper crafters use these machines for cards, tags and scrapbook details, while leather workers use a press to stamp a logo or pattern into wallets, belts and patches. The machine you need depends on the material and the size.
Types of manual embossing machines
Crank machines are the paper-craft type. The CraftGenes mini machine has a 3.5-inch feed slot, takes paper up to 3 inches wide and turns a handle to feed the plate stack through. It ships as a starter kit with plates, folders, a die set, stamps and cardstock.
Lever presses and manual die cutters are the leather type. The LGIB press (on Amazon) states 1.5 tons of pressure, a 5.9 x 3.9 in embossing plate and an adjustable stroke of 0.47 inches. The VEVOR press is a manual die cutter that names a 10.2 x 5.9 in plate with the same 0.47 in stroke and dual guide shafts. Dual guide shafts keep the plate level.
The Sizzix Big Shot is a 6-inch die-cutting and embossing machine sold as machine only. Its listing gives no further detail, so match it to dies you already own rather than to a stated spec.
How to choose a manual embossing machine
- Match the opening to the project: a 3.5-inch feed slot suits cards and tags, while a 10.2 x 5.9 in plate suits larger leather pieces.
- Match the machine to the material: thin metal dies, cardstock and plain paper go through a crank machine; leather, foam and rubber sheets suit a lever press.
- Weigh portability against force: the CraftGenes machine states 2.82 pounds and a top handle for travel, while the LGIB press states 6.8 kg with a compact design for easy transportation and storage.
- Count what comes in the box: a 24-accessory starter kit covers a beginner, while a machine-only listing means dies and folders come separately.
Manual embossing machines for paper and leather
The machines below cover small paper embossing with a crank machine, and leather pressing with a lever press and a manual die cutter.
FAQ: lasers and CNC
What is a manual embossing machine?
A manual embossing machine is a hand-powered press that raises a design into paper or leather. A crank machine feeds a plate stack through rollers, and a lever press pushes an embossing plate down onto the material.
Can a manual embossing machine work on leather?
Yes. The LGIB press states 1.5 tons of pressure and a 5.9 x 3.9 in embossing plate for leather and other soft materials. A paper crank machine is not made for thick materials.
What size embossing machine do I need?
Match the feed slot or plate to the project. A 3.5-inch feed slot suits cards, tags and scrapbook details, while a 10.2 x 5.9 in plate suits larger leather pieces.
Do manual embossing machines need power?
No. The CraftGenes machine turns a handle with no cords or batteries, and the LGIB press uses a hand-operated lever.
What comes with a manual embossing machine starter kit?
The CraftGenes kit includes 3 cutting plates, 3 embossing folders, 1 die set, 7 stamps and 10 cardstock sheets, plus the machine and an instruction guide. Machine-only listings such as the Sizzix Big Shot include no dies or folders.
Related: the craft machines hub and cutting machines.




