Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Manual Die Cutting Machine: How to Choose and Use It

A manual die cutting machine cuts shapes from paper, fabric and leather with steel dies, and this guide explains how to choose and use it well.

Manual Die Cutting Machine: How to Choose and Use It
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR Leather Cutting MachineVEVOR Leather Cutting Machine9.6/10View on Amazon
  2. 2VEVOR Leather Cutting MachineVEVOR Leather Cutting Machine9.6/10View on Amazon
  3. 3Spellbinders Amazon Exclusive Platinum 6 DieSpellbinders Amazon Exclusive Platinum 6 Die9.4/10View on Amazon
  4. 46inch Manual Die Cutting Machine Kit6inch Manual Die Cutting Machine Kit9.4/10View on Amazon

A manual die cutting machine is a hand-powered press that cuts shapes out of paper, fabric, leather and other sheet materials with steel dies. You set a die and a sheet on the machine, and the pressure does the cutting: the VEVOR presses drive the die down with a handle, while the Spellbinders machine passes the die and the sheet through its platform opening. This guide explains how a manual die cutting machine works, what to check before buying, and which machine fits which kind of project.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

VEVOR Leather Cutting Machine

VEVOR Leather Cutting Machine

VEVOR9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Manual leather die cutter, 14.2 x 10.2 in plate, 0.47 in stroke, 3306 lb load.

Pros

  • 14.2 x 10.2 in plate, the largest work area here
  • 3306 lb load capacity with roller bearings and a manganese steel base plate
  • 0.47 in adjustable stroke handles various thicknesses of leather
  • Cuts fabric leather, PVC/EVA foam, plastic and rubber sheets

Cons

  • No warranty term in the listing
  • 97.22 pounds, so plan a fixed spot for it on the bench
  • Paper and cardstock are not named materials
  • The listing does not state which dies are included
VEVOR Leather Cutting Machine

VEVOR Leather Cutting Machine

VEVOR9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Manual leather die cutter, 10.2 x 5.9 in plate, 0.47 in stroke, 3306 lb load.

Pros

  • Same 3306 lb load capacity and 0.47 in stroke as the larger VEVOR
  • 10.2 x 5.9 in embossing plate for smaller leather pieces
  • Dual guide shafts and limiting screws hold the handle steady
  • Steel build with a black oxide coating resistant to rust and corrosion

Cons

  • No warranty term in the listing
  • Smaller plate than the 14.2 x 10.2 in VEVOR
  • Weight is not stated in the listing
  • The listing does not state which dies are included
Spellbinders Amazon Exclusive Platinum 6 Die

Spellbinders Amazon Exclusive Platinum 6 Die

Spellbinders9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

6-inch die cutting and embossing machine with a Universal Plate System, bundled with a 3D embossing folder and Classic Mouse die sets.

Pros

  • 6-inch wide platform and opening for paper-craft dies
  • Universal Plate System takes etched and steel rule dies, and 2D and 3D embossing folders
  • Includes a 3D embossing folder and Classic Mouse die sets
  • Strong steel internal components

Cons

  • No warranty term in the listing
  • 6-inch platform is narrower than the VEVOR plates
  • Weight and dimensions are not stated
  • Leather and thick materials are not stated uses
6inch Manual Die Cutting Machine Kit

6inch Manual Die Cutting Machine Kit

Find Scrapblooms9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A manual die cutting and embossing machine with a 6 inch opening for A5 paper, with a carbon steel inner construction and plates for die cutting and embossing. Who it's for: beginners starting scrapbooking and cardmaking with standard die cuts and embossing folders. Who should skip it: makers needing A4 paper, since the opening is 6 inches and the paper size stated is A5.

Pros

  • 6 inch opening for A5 paper, compatible with most standard die cuts and embossing folders.
  • Carbon steel inner construction, per the listing.
  • Plate stacks stated for embossing and die cutting, for repeatable results.
  • Handle design and compact shape for storage in a room.

Cons

  • No warranty term is stated in the listing.
  • No safety certification is stated in the listing.
  • 6 inch opening limits paper to A5 size, not A4.

How a manual die cutting machine works

A manual die cutting machine presses a shaped steel die through a sheet. On the VEVOR presses, the die sits on the material on the plate, and the handle drives the press down so the die edge cuts the shape. On the Spellbinders machine, the die and the sheet pass through the platform opening on plates from the Universal Plate System. Embossing uses a folder instead of a die: the folder presses a raised pattern into paper or card.

The VEVOR presses state a 3306 lb load capacity and a 0.47 in adjustable stroke for fabric leather, PVC/EVA foam, plastic, rubber sheets and medium-soft materials. The Spellbinders machine works with etched dies, steel rule dies, and 2D and 3D embossing folders through its Universal Plate System. Paper craft suits the smaller machines, and leather is named only on the VEVOR presses.

What to check before you buy

Check these points against the listing. No warranty term is stated for any machine in this guide.

  • Work area: the plate decides the largest die and sheet the machine takes, from a 6-inch platform to a 14.2 x 10.2 in embossing plate.
  • Materials: match the machine to what you cut: leather needs the VEVOR presses, paper craft fits the Spellbinders and Scrapblooms machines.
  • Pressure: the VEVOR presses state a 3306 lb load capacity and a 0.47 in adjustable stroke for various thicknesses of leather.
  • Dies and plates: the Spellbinders Universal Plate System works with etched dies, steel rule dies, and 2D and 3D embossing folders.
  • Size and weight: the larger VEVOR press weighs 97.22 pounds and suits a fixed bench spot; the smaller VEVOR press states no weight.

Manual die cutting machine picks

The machines below cover the cutting step: the VEVOR presses handle leather and thicker sheets, while the Spellbinders and Scrapblooms machines handle paper craft and cardmaking.

How to use a manual die cutting machine

Start with a practice piece of the same material. On the VEVOR presses, lay the die on the material with the cutting edge facing the sheet, set them on the plate, and pull the handle down in a smooth motion, then lift the handle and take the piece out. On the Spellbinders machine, set the die and the sheet on the plates from the Universal Plate System and pass them through the platform opening. Check the cut before you run the rest of the batch. The Scrapblooms kit states no steps, so follow the instructions in the kit.

Mistakes to avoid

  • Buying a plate smaller than the dies you already own.
  • Assuming dies from a system fit another machine: check the plate system before you buy.
  • Cutting material thicker than the machine handles: the VEVOR presses state a 0.47 in adjustable stroke for various thicknesses of leather, and the listing names no maximum thickness.
  • Skipping the listing details: weight, dimensions and warranty are not stated for every machine here.

FAQ: lasers and CNC

What materials can a manual die cutting machine cut?

The VEVOR presses name fabric leather, PVC/EVA foam, plastic, rubber sheets and medium-soft materials, while the Spellbinders and Scrapblooms machines are made for paper craft, cardmaking and scrapbooking.

What size die cutting machine do I need?

Match the plate to your largest die and sheet: 6-inch platforms on the Spellbinders and Scrapblooms machines, a 10.2 x 5.9 in plate on the smaller VEVOR, and a 14.2 x 10.2 in plate on the larger VEVOR.

Can a manual die cutting machine emboss?

Yes. The VEVOR presses have an embossing plate, the Spellbinders bundle includes a 3D embossing folder, and the Scrapblooms kit is described in its title as an A5 embossing machine.

Do manual die cutting machines need power?

No. The machines in this guide are hand-powered, and the listings describe no motor, cord or power input.

What dies work with a manual die cutting machine?

The Spellbinders Universal Plate System works with etched dies, steel rule dies, and 2D and 3D embossing folders. For the VEVOR presses and the Scrapblooms kit, the listings do not state which dies are included, so check the listing for die compatibility before you buy.

Related: the craft machines hub, cutting machines hub, best die cut machine for card making and best magnetic cutting mat.

More buying guides