Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Use Bias Tape Maker: Cut, Feed, Press and Sew

A bias tape maker folds a fabric strip into tape: cut the strip on the bias, feed it through the maker, press it flat, then sew it on.

How to Use Bias Tape Maker: Cut, Feed, Press and Sew
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Bias Tape Maker Set,LNKA 5 Sizes 1/4" 3/8" 1/2"Bias Tape Maker Set,LNKA 5 Sizes 1/4" 3/8" 1/2"9.7/10View on Amazon
  2. 2BUTUZE Bias Tape Makers KitBUTUZE Bias Tape Makers Kit9.6/10View on Amazon
  3. 3YICBOR 4 Sizes Bias Tape Maker for Fabric QuiltingYICBOR 4 Sizes Bias Tape Maker for Fabric Quilting9.5/10View on Amazon
  4. 4HONEYSEW Bias Tape Maker 6MM 12MM 18MM 25MMHONEYSEW Bias Tape Maker 6MM 12MM 18MM 25MM9.4/10View on Amazon

Learning how to use bias tape maker tools starts with the strip: cut fabric on the bias, feed one end through the wide mouth of the maker, pull it through with an awl while you press the folded tape with an iron, then sew the finished tape where you want it. The maker folds the raw edges to the middle as the strip passes through, so the tape comes out with folded edges. This guide walks through each step and the kits that cover the job.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Bias Tape Maker Set,LNKA 5 Sizes 1/4" 3/8" 1/2"

Bias Tape Maker Set,LNKA 5 Sizes 1/4" 3/8" 1/2"

LNKA9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-size bias tape maker kit with a binder presser foot, wooden awl, craft clips and bead head pins, plus an instruction sheet.

Pros

  • 5 sizes from 1/4 in to 1 in, the most sizes here
  • Instruction sheet included, so the steps are in the box
  • Binder foot fits Brother, Babylock, Janome, Kenmore, Singer
  • Box included for storage, plus 4 craft clips and 10 bead head pins

Cons

  • No warranty term is stated on the listing
  • No weight is stated on the listing
  • No dimensions are stated for the makers
  • No fabric types are stated in the listing
BUTUZE Bias Tape Makers Kit

BUTUZE Bias Tape Makers Kit

BUTUZE9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-size bias tape maker set with fixing clips, a wooden awl, 50 positioning pins and an adjustable binder foot, in a storage box.

Pros

  • 4 sizes from 6 mm to 25 mm with clips, awl, pins and a binder foot
  • Step-by-step usage: cut at 45 degrees, feed, pin, press
  • Works with cotton, silk and linen, per the listing
  • Storage box included, so the set stays together

Cons

  • The listing states no warranty
  • No weight is stated on the listing
  • Four sizes only, while the LNKA kit offers 5
YICBOR 4 Sizes Bias Tape Maker for Fabric Quilting

YICBOR 4 Sizes Bias Tape Maker for Fabric Quilting

YICBOR9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-size bias tape maker set that folds fabric into halves automatically, for quilting, binding and DIY sewing.

Pros

  • 4 sizes from 6 mm to 25 mm in one set
  • Folds fabric into halves automatically, per the listing
  • Weight and dimensions are stated: 0.09 lb
  • Covers quilting, binding and DIY sewing

Cons

  • No warranty term is stated on the listing
  • Only one short bullet describes the set, so details are thin
  • No binder foot, clips or pins are listed with the makers
  • No fabric types are stated in the listing
HONEYSEW Bias Tape Maker 6MM 12MM 18MM 25MM

HONEYSEW Bias Tape Maker 6MM 12MM 18MM 25MM

HONEYSEW9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-size bias tape maker kit with a binder foot, bradawl, quilting clips and sewing pins for making bias tape at home.

Pros

  • 4 sizes from 6 mm to 25 mm with binder foot, bradawl, clips and pins
  • The size list in the spec table matches the title: 6, 12, 18 and 25 mm
  • Covers napkins, handbags and bibs as project ideas
  • Kit form with the tools together in one listing

Cons

  • Bullets name a 50MM (2 inch) maker and Clover, against a 6 to 25 mm HONEYSEW title
  • No warranty term is stated on the listing
  • No weight or dimensions are stated
  • Only one short bullet describes the kit, so details are thin

How to use a bias tape maker: the steps in order

A bias tape maker folds a flat fabric strip into tape with the raw edges tucked in. Pick the maker size that matches the tape width you want, then work through the steps in order.

Step 1: cut the strip on the bias

Cut parallel cloth strips at a 45-degree angle, in the width your maker size needs. The 45-degree cut is what makes the strip bias tape, and the maker folds it into halves as it passes through.

Step 2: feed the strip through the maker

Let the back of the bias tape face upward, then insert the cloth strip into the wide mouth of the maker. Use an awl to pull the cloth strip from the head of the maker, so the strip starts to fold as it passes through. The sewing awl can also untie a knot in the strip if one forms.

Step 3: pin the strip and press as you pull

Position a pin to fix the pulled cloth strip on the ironing plate, then pull the tape through. Keep the iron close to the head part of the maker while you pull, so the pulled strip is shaped immediately as it leaves the maker. The maker folds the fabric into halves, and the iron sets the fold.

Step 4: sew the finished tape in place

Once the tape is folded and pressed, it is ready for sewing on or gluing. Use the tape as an accent, a border or a trim, or as binding for quilts, garments, bibs and bag handles. A binder presser foot fits Brother, Babylock, Janome, Kenmore and Singer machines.

Bias tape maker kits for the job: how to use bias tape maker

The steps above need a maker in the width you want, plus an awl and pins. The kits below cover those parts in different sizes, though the YICBOR set lists the makers alone.

FAQ: lasers and CNC

What sizes do bias tape makers come in?

The kits here list makers in 6, 12, 18 and 25 mm, and the LNKA kit adds a 9 mm maker, giving it 5 sizes from 1/4 in to 1 in. Pick the size that matches the tape width you want.

Do I need an awl to use a bias tape maker?

The BUTUZE and LNKA kits (on Amazon) include a wooden awl for pulling the strip through the maker, and the HONEYSEW kit lists a bradawl. The awl pulls the cloth strip from the head of the maker.

What fabric works with a bias tape maker?

The BUTUZE listing names cotton, silk and linen, and lists quilting, garment making and crafts as uses.

How do I keep the tape folded while I sew it?

Press the tape as it leaves the maker, with the iron close to the head part, so the fold is set before you sew. Pin the pulled strip on the ironing plate to fix it while you press.

Which kit has the most sizes?

The LNKA kit lists 5 sizes from 1/4 in to 1 in, while the other kits list 4 sizes in 6, 12, 18 and 25 mm.

Related: the sewing and embroidery machines hub, magnetic seam guide sewing and best fabric steamer for sewing.

More buying guides

Sewing and Embroidery Machines ·

How to Make Continuous Bias Tape

How to make continuous bias tape: cut a square on the diagonal, sew it into a tube, cut one continuous spiral strip, feed it…