Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Cut Glass with Glass Cutter: Score and Snap

How to cut glass with glass cutter, step by step: score the surface in one pass, snap along the line and finish the edge with the right gear.

How to Cut Glass with Glass Cutter: Score and Snap
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Rizom Glass Cutting ToolRizom Glass Cutting Tool9.7/10View on Amazon
  2. 2YUEARN Glass Cutter(2-20mm)YUEARN Glass Cutter(2-20mm)9.6/10View on Amazon
  3. 32 Pack Pistol Grip Oil Feed Glass Cutter2 Pack Pistol Grip Oil Feed Glass Cutter9.6/10View on Amazon
  4. 4Premium Glass Cutting Oil (8 oz)Premium Glass Cutting Oil (8 oz)9.5/10View on Amazon

How to cut glass with glass cutter starts with a scored line: press the wheel to the glass, draw it along a straight edge in a smooth pass, then snap the sheet along the score. The cutter never slices through the sheet; it scores the surface, and the break follows that line. The steps below walk through the job in order.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Rizom Glass Cutting Tool

Rizom Glass Cutting Tool

Rizom9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A glass cutting kit with an oil-feed cutter, 3 heads for 2 to 20 mm glass, running pliers and breaker grozer pliers.

Pros

  • Oil-feed cutter with 3 replaceable heads for 2 to 20 mm glass
  • 8 in running pliers and 6 in breaker grozer pliers included
  • Pearl nickel-plated carbon steel pliers for rust resistance
  • Storage bag, oil dropper and tools included

Cons

  • Oil dropper included, but no cutting oil is stated
  • Pistol grip only, with no pencil style cutter in the kit
  • Largest listed size here at 10.5 x 3.9 x 2.8 in
  • Canvas bag, not a hard case
YUEARN Glass Cutter(2-20mm)

YUEARN Glass Cutter(2-20mm)

YUEARN9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pencil style glass cutter with automatic oil feed and 3 carbide heads for 2 to 20 mm glass, mirrors, tiles and mosaics.

Pros

  • 3 replaceable carbide heads for 2 to 6 mm, 6 to 12 mm and 12 to 20 mm glass
  • Automatic oil feed lubricates the wheel while scoring
  • Anti-skid alloy handle holds a 45-degree angle for control
  • Oil dropper and spare blades included

Cons

  • No running pliers or grozer pliers in the kit
  • 30 day warranty
  • Pencil style only; no pistol grip option
  • No storage bag is stated
2 Pack Pistol Grip Oil Feed Glass Cutter

2 Pack Pistol Grip Oil Feed Glass Cutter

HTINXED9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2 pack of pistol grip oil-feed glass cutters with carbide wheels for window panes, mirrors, shelves and stained glass.

Pros

  • 2 pack: a spare cutter in the same buy
  • Carbide wheel for hardness and durability
  • Automatic oil dispensing protects the cutting head
  • Pistol grip for a comfortable, natural grip angle

Cons

  • No thickness range is stated
  • No warranty term is stated
  • No running pliers or breaking tools included
  • No spare heads are stated
Premium Glass Cutting Oil (8 oz)

Premium Glass Cutting Oil (8 oz)

UniKitchen9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8 oz glass cutting oil for any glass cutter, formulated to lubricate the wheel and protect cutting heads and bits.

Pros

  • 8 oz bottle with a precision twist-top
  • Works with carbide tip, pistol grip oil feed, diamond tip and more
  • Stated to prolong blade, bit and wheel life
  • Cleans up with soap or alcohol and does not dry out easily

Cons

  • Oil only; it cuts nothing on its own
  • No warranty term is stated
  • 8 oz bottle is small for frequent cutting
  • Bottle only; no cutter, pliers or storage is included

Step 1: Set the glass on a flat surface

Set the glass on a flat, steady surface and wipe it clean, then lay a straight edge along the line you want to cut. The straight edge guides the wheel, so keep it flat against the glass.

Step 2: Score the surface in a smooth pass

Hold the cutter at the angle its handle is made for and press the wheel to the glass at the start of the line. Draw it along the straight edge in a smooth, steady pass. The wheel leaves a fine score line, so keep the pass continuous.

Step 3: Snap the glass along the score

Lift the straight edge away, then snap the sheet along the score line. Running pliers grip the glass on both sides of the line and put the break where the score runs; the Rizom kit includes 8 in running pliers.

Step 4: Finish the edge

The fresh edge is sharp, so handle the cut piece with care. Breaker grozer pliers shape the edge after the break; the Rizom kit includes a 6 in pair.

The gear for cutting glass

The cutters in this guide score with carbide wheels and oil feed, the snap uses running pliers, and the finish uses grozer pliers.

How to cut glass with glass cutter safely

Glass cutting makes shards and sharp edges, so eye protection and gloves belong in the routine. Keep the work surface steady while scoring and snapping.

FAQ: lasers and CNC

What thickness of glass can a glass cutter score?

The Rizom kit and the YUEARN cutter (on Amazon) both state 2 to 20 mm, with 3 heads for 2 to 6 mm, 6 to 12 mm and 12 to 20 mm glass.

Do I need cutting oil to cut glass?

The Rizom, YUEARN and HTINXED cutters feed oil (on Amazon) to the wheel as they score. The UniKitchen oil (on Amazon) suits cutters that need oil by hand, and it works with carbide tip, pistol grip oil feed and diamond tip cutters.

What do running pliers do?

Running pliers grip the glass on both sides of the score line and snap the sheet along it. The Rizom kit includes 8 in running pliers with curved jaws.

Can a glass cutter cut mirrors and tiles?

Yes: the Rizom kit and the YUEARN cutter state mirrors, tiles, mosaics and stained glass, and the HTINXED cutters state window panes, mirrors and shelves.

What is the difference between a pistol grip and a pencil style cutter?

The grip shape is the difference: the HTINXED and Rizom cutters (on Amazon) use a pistol grip, while the YUEARN cutter uses a pencil style handle that holds a 45-degree angle.

Related: the Pottery and Glass hub, our best stained glass cutter picks and the best glass bottle cutter guide. Also see how to laser engrave glass.

More buying guides

Engraving Materials ·

Can You Cut Acrylic With a Laser Cutter?

Yes, acrylic sheets cut cleanly with a laser, and this guide shows which sheets to pick, how to keep the cut clean and what…