Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How Much Do DTF Transfers Cost: What Affects the Price

How much do dtf transfers cost comes down to film roll size, printer, ink, powder, garment and design size. This guide breaks down each input.

How Much Do DTF Transfers Cost: What Affects the Price
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1CenDale DTF Transfer Film Roll 24" x 328ftCenDale DTF Transfer Film Roll 24" x 328ft9.6/10View on Amazon
  2. 2InkSonic DTF Transfer Film RollInkSonic DTF Transfer Film Roll9.5/10View on Amazon
  3. 3Welacer DTF Transfer Film RollWelacer DTF Transfer Film Roll9.5/10View on Amazon
  4. 4Welacer DTF Transfer Film RollWelacer DTF Transfer Film Roll9.5/10View on Amazon

How much do dtf transfers cost depends on the film roll you print on, the printer, ink and powder behind it, the garment you press onto and how large each design is. There is no single price for a transfer: a small chest logo on a shirt you already own costs far less to produce than a full-back design pressed onto a new blank, and the film itself is only one part of the bill. This guide breaks down each input so you can price a transfer from your own setup.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

CenDale DTF Transfer Film Roll 24" x 328ft

CenDale DTF Transfer Film Roll 24" x 328ft

CenDale9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 24" x 328ft double sided matte PET film roll with hot and cold peel for 24 inch DTF printers.

Pros

  • 24" x 328ft roll (60cm x 100m) for wide design layouts
  • 5 layers coating process for ink absorption, per the maker
  • Hot and cold peel with stated press settings: 266 - 320 °F, 10 to 15 seconds
  • 18 months warranty stated

Cons

  • Film only: a DTF printer, DTF ink and DTF powder are separate purchases
  • Roll format needs a roll-enabled 24 inch DTF printer
  • 16.4 pounds per roll to store and handle
  • PET film is non-degradable, per the maker
InkSonic DTF Transfer Film Roll

InkSonic DTF Transfer Film Roll

RocRow9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 11.8" x 328ft matte DTF transfer film roll with an anti-static layer and cold and hot peel.

Pros

  • 11.8" x 328ft roll sized for A3 class printers
  • Upgraded anti-static layer to limit powder residue, per the maker
  • Matte finish stated to help identify the printable side
  • Cold peel application stated

Cons

  • 11.8 inch width fits fewer designs side by side than a 24 inch roll
  • No warranty term is stated
  • Film only: printer, ink and powder are separate purchases
  • Cold peel means waiting for the print to cool before peeling
Welacer DTF Transfer Film Roll

Welacer DTF Transfer Film Roll

Welacer9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 24 inch by 328 foot double-sided matte DTF transfer film roll for hot and cold peel, listed for inkjet, DTG and DTF printers and all color fabrics.

Pros

  • 24 inch by 328 foot roll, the widest film in this guide
  • Double-sided matte film with an even coating, for hot and cold peel
  • Listed for cotton, jeans, leather, blends, spandex, nylon, canvas and polyester
  • Listed as needing no pretreatment and no weeding

Cons

  • No warranty term in the listing
  • The listing mixes UV DTF wording with DTF wording, so confirm the film type before ordering
  • The listing weight of 16.75 pounds is the highest of the rolls here
  • Cold peel is listed as giving the better effect, so hot peel may give a weaker result
Welacer DTF Transfer Film Roll

Welacer DTF Transfer Film Roll

Welacer9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13 in x 328 ft roll of double-sided matte DTF transfer film with hot and cold peel, no weeding and no pretreatment, for DTF inkjet printers.

Pros

  • 13 in x 328 ft roll for long runs
  • Double-sided matte film, evenly coated
  • Hot and cold peel, with cold peel stated better so far
  • No weeding and no pretreatment stated

Cons

  • Needs a DTF printer with DTF ink and powder
  • Roll format only, no sheets in this listing
  • No stated ironing temperature or time
  • Wash durability stated without a cycle count

How much do dtf transfers cost: the inputs that decide it

A DTF transfer is printed on PET film, coated with hot-melt powder, the powder melted, then pressed onto fabric. Each step consumes something you pay for: film by the roll, ink by the cartridge or bottle, powder by the bag, and the garment itself. Your press time and any failed prints add to the real cost per finished piece. The sections below take each input in turn. For the full workflow, see our guide on how to make a DTF transfer.

Film roll size and length

Film is sold by roll width and length, and that choice sets how many designs you get from one roll. The rolls in this guide run 328ft long, in widths of 24 inches, 13 inches and 11.8 inches. A wider roll lets you nest more designs side by side before cutting, which can lower the film cost per transfer when you gang several designs on one print run. A narrower roll matches smaller printers and wastes less film on single small designs. The CenDale roll (on Amazon) is listed at 24″ x 328ft (60cm x 100m), the InkSonic at 11.8″ x 328ft and the Welacer rolls at 24″x328FT and 13″x328FT. Match the roll width to your printer first, then work out how many of your designs fit across it.

Printer, ink and powder

Film alone does not make a transfer. CenDale states that to use its film you will need a DTF printer, DTF ink and DTF powder: the printer lays the design on the film, the powder gives the print its adhesive layer, and the powder is then melted before pressing. The other products in this guide are also film rolls, so budget for a printer, ink and powder separately from the film. If you already own the printer, ink and powder are your running costs per design. If you do not, the printer is a separate equipment purchase that spreads across every transfer you make afterward. Our DTF printer set up guide covers what the first setup needs.

Press settings, fabric and design size

Press settings affect waste, and waste is cost. CenDale lists a suggested transfer temperature of 266 – 320 °F and a press time of 10 to 15 seconds for its film, with hot and cold peel. A design pressed at the wrong setting can fail and take the garment with it, so the stated settings for your film matter. Fabric choice matters too: CenDale lists cotton, leather, nylon, denim, polyester, synthetic and blended textile, on both light and dark fabrics. Larger designs use more film, ink and powder per piece, so price by design size, not per shirt. For settings by material, see our heat press temperature for DTF guide.

DTF film rolls to price out

The film roll is the input you buy again and again, so compare these rolls by width, length and peel type against your printer and your usual design sizes.

FAQ: lasers and CNC

What makes one DTF transfer cost more than another?

Design size, garment cost and waste. A larger design uses more film, ink and powder, a new blank costs more than a shirt you already own, and a failed press wastes both the print and the garment. The film cost per transfer can fall when you nest several designs across the roll width.

What do I need besides DTF film?

CenDale states you will need a DTF printer, DTF ink and DTF powder to use its film. The workflow is print on the film, spread the powder, melt the powder, pre-press the garment, then press and peel. See our guide on how to use DTF transfer film for each step.

Which film width should I buy?

Match the roll to your printer. The rolls here come in 24 inch, 13 inch and 11.8 inch widths, all 328ft long. Wider film fits more designs side by side per run, which suits batch work, while narrower film suits smaller printers and single designs.

What press temperature and time does DTF film use?

CenDale lists a suggested transfer temperature of 266 – 320 °F and a suggested press time of 10 to 15 seconds for its 24″ x 328ft roll, with hot and cold peel. Settings vary by film and fabric, so follow the figures stated for the film you buy.

How long do DTF transfers last on fabric?

Durability depends on the film, powder and press settings used. CenDale describes high washability and stretch resistance for its film, and Welacer describes its film as wash durable. For care and lifespan detail, see our guide on how long DTF transfers last.

Related: the craft machines hub, how to use DTF transfer film and DTF printer set up.

More buying guides

Craft Machines ·

Low Cost DTF Printer: What to Buy (2026)

A low cost DTF printer guide comparing print width, printhead, white ink circulation, bundle contents, ink supply and warranty terms for apparel work.