Embroidery Machine vs Dtf Printer: Which One Should You Buy?
Embroidery machines and DTF printers compared on needles, print width, speed, workflow and support, so apparel makers can pick the decoration method that fits their orders.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Poolin EOM 15 Needle Commercial Embroidery Machine9.7/10View on Amazon - 2
RocRow InkSonic F1080 A3+ DTF Printer9.7/10View on Amazon - 3
RocRow InkSonic R1390 13" DTF Printer with Oven9.6/10View on Amazon - 4
Smartstitch S-1201 Plus Embroidery Machine with 129.6/10View on Amazon
A small apparel shop with orders for polos, caps and custom shirts faces a fork in the road: stitch the design into the fabric, or print it as a transfer and press it on. This comparison of embroidery machine vs dtf printer puts the embroidery listings against the DTF listings, using what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: embroidery fits shops that sell stitched logos on polos, caps and uniforms, while DTF printing fits shops that sell full-color artwork on shirts and bags. The Poolin EOM 15 leads the ranking, and the RocRow InkSonic F1080 leads the DTF side.
Machines on the list

Poolin EOM 15 Needle Commercial Embroidery Machine
A 15-needle commercial embroidery machine with a 14.2 x 9.5 in area, a 9-inch touchscreen and cap embroidery.
Pros
- 15 needles with automatic color change
- Up to 1,200 SPM flat, up to 850 SPM on caps
- 270-degree cap system for front, side and back embroidery
- 5 hoops, 1 cap station, 2 cap hoops, 25 bobbins, 4 spools, 50 stabilizer sheets
Cons
- 165.0 pounds, so plan floor space
- No stitch memory figure is stated
- Cap work runs slower than flat work
- Buyers must keep the pallet and boxes for a few days

RocRow InkSonic F1080 A3+ DTF Printer
An A3+ DTF printer with an oven, a film cutter and a laptop, built around a F1080 printhead.
Pros
- A full A3 print in 3 minutes with a solid white underbase layer
- Data transfer in about 20 seconds, with RIP layout software
- Siphon one-click ink filling with CISS white ink circulation
- Laptop, oven and film cutter included
Cons
- No print width in inches is stated
- 6 Months warranty, shorter than the Poolin listing's 1 year
- No cleaning interval in hours is stated for Vacation Mode

RocRow InkSonic R1390 13" DTF Printer with Oven
A 13-inch DTF printer with an oven and a laptop, built for entry-level full-color transfers.
Pros
- 13-inch print width with an L1800 printhead and G7-certified color
- No garment pretreatment required
- Vacation Mode cleans automatically every 12 hours
- One-touch white ink circulation for an opaque white underbase
Cons
- No print speed in minutes is stated
- 6 Month warranty
- No print resolution figure is stated
- The listing names no film cutter

Smartstitch S-1201 Plus Embroidery Machine with 12
A 12-needle commercial embroidery machine with a 12 x 16 in area and a 10-inch touchscreen.
Pros
- 12 x 16 in embroidery area, with a 16 in side for long flat pieces
- 1200 SPM max speed with automatic color change
- Self-lubrication system and thread break detection
- Smart control system V7, up to 100 million stitches of memory
Cons
- No warranty term is stated in the listing
- No weight is stated in the listing
- 12 needles against the Poolin listing's 15
- Cap embroidery speed is not stated
Other machines to compare
DXZ 2026 14'' A3 DTF Printer with F1080 PrintheadCheck price on Amazon
xTool Apparel Printer Plus Bundle with Shaker Oven & FumeCheck price on Amazon
Poolin EOC07 Embroidery MachineCheck price on Amazon
WJTZXY A3+ Plus XP600 DTF Printer with Shaking DryerCheck price on Amazon
DSV 14'' A3 DTF Printer with ShakerCheck price on Amazon
PUNEHOD A3 DTF Printer R1390Check price on Amazon
Side by side
| Spec | Poolin EOM 15 | RocRow InkSonic F1080 | RocRow InkSonic R1390 | Smartstitch S-1201 Plus |
|---|---|---|---|---|
| HQ Score | 67 | 66 | 61 | 59 |
| Side | Embroidery machine | DTF printer | DTF printer | Embroidery machine |
| Needles / Printhead | 15 needles | F1080 printhead | L1800 printhead | 12 needles |
| Work area / Print width | 14.2 x 9.5 in embroidery area | A3 print | 13 in print width | 12 x 16 in embroidery area |
| Speed | Up to 1,200 SPM flat, up to 850 SPM cap | A3 print in 3 minutes | Not stated in the listing | 1200 SPM max |
| Warranty | 1 year | 6 Months | 6 Month | Not stated in the listing |
Size and performance figures are the brand’s ratings quoted from listings.
embroidery machine vs dtf printer: how the sides differ
The split comes down to how the design reaches the garment. The embroidery listings describe machines that stitch designs with needles and thread, moving a hoop under the needle to build logos and lettering. The DTF listings describe printers that print full-color transfers on film, which then move to the garment with heat. The right pick follows the work the shop already sells.
The embroidery side
The Poolin EOM 15 carries 15 needles with automatic color change, automatic thread trimming and thread-break detection, stitching flat work at speeds up to 1,200 SPM and caps at speeds up to 850 SPM. Its area measures 14.2 x 9.5 in, the 9-inch touchscreen runs InStitch OS4, and designs arrive as DST or DSB files. The box holds 5 standard hoops, 1 cap station and 2 cap hoops, plus 25 prewound bobbins, 4 spools of 4000-yard thread and 50 stabilizer sheets. The Smartstitch S-1201 Plus carries 12 needles with a 1200 SPM max speed and a 12 x 16 in area, worked from a 10-inch touchscreen, with a self-lubrication system and up to 100 million stitches of memory.
The DTF side
The RocRow InkSonic F1080 prints a full A3 sheet with fine color and a solid white underbase layer in 3 minutes, which the maker claims is up to 200% faster than traditional L1800-based DTF printers, with print data transfer in about 20 seconds. Siphon one-click filling and CISS white ink circulation feed the underbase, and the box holds a laptop, an oven and a film cutter. One naming snag: the title leads with F1080 while the bullets and the spec table call the machine H13, so match the listing by Model H13. The RocRow InkSonic R1390 takes the entry-level slot with a 13-inch print width, an L1800 printhead and G7-certified color, plus an oven and a laptop. It needs no garment pretreatment, and one-touch white ink circulation builds an even, opaque white underbase for dark fabrics. Vacation Mode runs an automatic cleaning cycle every 12 hours and, per the maker, helps reduce printhead clogs by over 80%.
Materials and items
The Poolin listing covers stitched work on polos, uniforms, T-shirts, hoodies, sweatshirts, jackets, tote bags, towels, patches and personalized gifts, plus hats. The Smartstitch listing covers denim, canvas, leather, vinyl, caps, shoes and bags. The F1080 listing covers printed work on shirts, bags and custom apparel, and the R1390 listing covers custom apparel, calling out dark fabrics.
Support and warranty
The Poolin listing states a 1 year warranty, the F1080 listing states 6 Months and the R1390 listing states 6 Month, while the Smartstitch listing states no warranty term. InkSonic offers 24/7 help by phone or online on both DTF listings, with 20+ engineers named on the F1080 listing, while the Smartstitch listing points buyers to its user community.
Choose embroidery if
- Orders center on stitched logos for polos and caps.
- Hats matter: the Poolin listing covers front, side and back embroidery.
Choose DTF printing if
- Orders center on full-color artwork for shirts and bags.
- Dark fabrics matter: white ink circulation builds the underbase.
For more embroidery options, see best professional embroidery machine.
Project Match
- Stitched logos on polos and uniforms: Poolin EOM 15, with 15 needles.
- Caps, front, side and back: Poolin EOM 15, with a 270-degree cap system and cap hoops.
- Large flat pieces in denim and canvas: Smartstitch S-1201 Plus, with a 12 x 16 in area.
- Full-color A3 artwork: RocRow InkSonic F1080, with an A3 print in 3 minutes.
FAQ: lasers and CNC
Which is better for a small apparel business, an embroidery machine or a DTF printer?
It follows the orders. Embroidery fits stitched logos on polos, caps and uniforms, while DTF printing fits full-color artwork on shirts and bags.
Can a DTF printer handle dark shirts?
Yes, with a white underbase. The R1390 listing describes one-touch white ink circulation, and the F1080 listing describes a solid white underbase layer.
Do the embroidery machines need a computer?
The machines run from their touchscreens, but the designs arrive as files: the Poolin listing takes DST or DSB files through WiFi or USB, and the Smartstitch listing takes DST or DSB files from a computer with USB.
Which embroidery machine has the larger embroidery area?
The Smartstitch lists a 12 x 16 inch embroidery area, while the Poolin lists a 14.2 x 9.5 inch area. Both list cap work, and the Poolin lists 270-degree cap embroidery.
Related: embroidery machine vs sublimation printer, A3 vs A4 DTF printer, embroidery machine vs heat press and polyester vs rayon embroidery thread.




