Polyester vs Rayon Embroidery Thread: Which One Should You Buy?
A guide comparing polyester embroidery thread from two listings, with the rayon side left unstated where no listing states it.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Poolin EOC07 Embroidery Machine Bundle9.7/10View on Amazon - 2
Brother PE900 5" x 7" Embroidery Machine All-in-One Bundle9.7/10View on Amazon - 3
Brother PE900 5" x 7" Embroidery Machine with 4 Magnetic9.7/10View on Amazon - 4
Poolin Polyester Machine Embroidery Thread 4000M 40WT WhiteView on Amazon - 5
BAI Polyester Machine Embroidery ThreadView on Amazon - 6
New brothread 25 Basic Color Huge Spool Polyester EmbroideryView on Amazon - 7
AK Trading 4-Pack White All Purpose Sewing Thread ConesView on Amazon - 8
Mandala Crafts 40S/2 White Polyester 4 Pack of Serger ThreadsView on Amazon - 9
Poolin Magsnap Prewound Bobbin Thread for Embroidery MachineView on Amazon
Polyester vs rayon embroidery thread comes down to what the listings here actually document. The gear examples in this guide are polyester machine embroidery thread, and no listing here states rayon figures, so this guide sets out the polyester side from stated specs and names what the rayon side leaves unstated.
Other machines to compare
Poolin Polyester Machine Embroidery Thread 4000M 40WT WhiteCheck price on Amazon
BAI Polyester Machine Embroidery ThreadCheck price on Amazon
New brothread 25 Basic Color Huge Spool Polyester EmbroideryCheck price on Amazon
AK Trading 4-Pack White All Purpose Sewing Thread ConesCheck price on Amazon
Mandala Crafts 40S/2 White Polyester 4 Pack of Serger ThreadsCheck price on Amazon
Poolin Magsnap Prewound Bobbin Thread for Embroidery MachineCheck price on Amazon
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
No listing here states rayon specs, so this guide gives no rayon figures. Treat any rayon claim seen elsewhere as a claim to check against that listing, not as a fact from this guide.
polyester vs rayon embroidery thread: the short answer
On the evidence of these listings, polyester is the only side documented here, because both spools state 100% polyester, 40WT weight and long lengths, while rayon has no stated weight, length or finish here. That does not make rayon a poor choice in general; it means this guide cannot rank rayon from data it does not have. A reader choosing between the two should compare a rayon listing’s stated weight and length against the polyester figures below before deciding.
What polyester brings, per the listings
Both listings describe 100% polyester thread at 40WT. The New brothread listing adds 120D/2 thickness, color fastness, high strength and exceptional lustre as maker claims, plus color conversion between Brother colors and Madeira colors. The Poolin listing describes a smooth, glossy finish with smooth feeding and stable tension, which matters for clean stitches and steady color coverage. A tension gauge can help a reader check the stable tension the Poolin listing describes.
Speed is where the listings differ in detail. New brothread suggests an average speed of 800 stitches per minute, and slowing to around 600 stitches per minute if breaking occurs, noting that a few colors may have weaker strength from longer dyeing. Poolin states no speed, so its speed is Not stated here. Neither listing states a rayon speed either, so speed comparisons across materials need a rayon listing of their own.
What the rayon side leaves unstated
Rayon weight: Not stated. Rayon length: Not stated. Rayon finish, strength and color fastness: Not stated. That list is the honest state of this guide’s data: the two listings are polyester listings, and nothing in them describes rayon thread. A reader who wants rayon should look for a rayon listing that states its weight, length, material content and machine fit, and compare those stated figures with the polyester figures in the next section, rather than assuming one material matches the other.
The gear: two polyester spools
First, the New brothread spool: a single huge spool of white 100% polyester thread, 5000M in length with 5500Y stated alongside, at 40WT and 120D/2 thickness. The maker states more than 1500 colors in stock and sells popular colors as single spools, with color conversion between Brother colors and Madeira colors. The listing says the spool suits home, semi-industrial, industrial and commercial machines, but home machine users must use an upright thread stand or holder to feed the thread properly. It suits a reader who wants one long spool in one color, with the speed guidance above.
Second, the Poolin spool: a single spool of white 100% polyester thread, 4000M in length with 4374Y stated alongside, at 40WT. The listing describes it for lettering, logos, monograms, patches, apparel, home décor and everyday embroidery, with smooth feeding and stable tension for clean, consistent stitching. It suits home and multi-needle machines, and a thread stand is recommended for single-needle home machines. It suits a reader who wants a long-run spool for frequent embroidery and batch work, since the listing says the long length reduces frequent spool changes.
Side by side, the stated lengths differ and the stated guidance differs: New brothread gives speed guidance and color conversion, while Poolin gives project uses and a smooth-finish description. Neither listing states a warranty term, a rayon figure or a second color in the spool, so none of those appear in this comparison. Readers new to machine embroidery can pair either spool with a beginner embroidery machine, following each listing’s thread-stand guidance for home machines.
Common mistakes to avoid
Running a huge spool on a home machine without a thread stand. Both listings raise the stand: New brothread says home users must use one, and Poolin recommends one for single-needle home machines.
Copying one spool’s length onto the other. The New brothread spool states 5000M and the Poolin spool states 4000M; each figure belongs to its own listing.
Assuming a rayon thread matches these polyester weights. Both spools here state 40WT, but no rayon weight is stated in this guide, so a rayon choice needs its own listing check.
Polyester vs rayon embroidery thread: the short version
Polyester, on these listings, means 100% polyester at 40WT in long single spools, with a thread stand for home use following each listing’s guidance. Rayon, on these listings, means Not stated. Buy the polyester spool whose stated length and guidance fit the work, and judge any rayon option only from a rayon listing that states its own figures.
FAQ: lasers and CNC
Can I use these polyester threads on a home embroidery machine?
Yes, following each listing’s stand guidance. New brothread says home users must use an upright thread stand or holder, and Poolin recommends a thread stand for single-needle home machines.
What weight are the threads here?
Both listings state 40WT. New brothread also states 120D/2 thickness.
How long is each spool?
New brothread states 5000M with 5500Y alongside, and Poolin states 4000M with 4374Y alongside.
What speed do the listings suggest?
New brothread suggests an average of 800 stitches per minute, slowing to around 600 stitches per minute if breaking occurs. Poolin states no speed.
Does this guide recommend rayon?
No. No rayon listing is included here, so this guide states no rayon figures and makes no rayon recommendation.
Related: the sewing and embroidery machine hub, best beginner embroidery machine and best computerized embroidery machine.




