Creality Raptor vs Ferret Pro: Which One Should You Buy?
Creality 3D scanners compared on accuracy, scan speed, color capture, weight and system requirements, using what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Creality Raptor X 3D Scanner9.5/10View on Amazon - 2
Creality Raptor 3D Scanner9.4/10View on Amazon
A maker who wants to turn a real object into a printable model needs a scanner that captures fine detail without a long setup, and a shop scanning people or large parts needs one that covers a wide area without cables in the way. This creality raptor vs ferret pro comparison works from the listings supplied: both cover the Creality Raptor side, so the head-to-head below scores the Raptor and the Raptor X on what each listing states; the Ferret Pro side has no listing here and stays unstated.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Verdict: the Creality Raptor X leads the pair on stated specs, with 34 cross laser lines plus 7 parallel lines, infrared scanning, and a wireless handle. The Creality Raptor is the lighter stated handheld at 372g, with full-color capture and a scan range from 5mm to 2000mm. The Ferret Pro side has no listing here.
Machines on the list

Creality Raptor X 3D Scanner
A Creality 3D scanner with 34 cross laser lines plus 7 parallel lines, infrared scanning, a wireless handle, and 0.02mm maximum accuracy.
Pros
- 34 cross laser lines plus 7 parallel lines cover complex shapes
- High measurement rates: 1,020,000 measurements/s cross laser and 3,580,000 measurements/s NIR
- Wireless handle lets you move around the object with a phone as the screen
- Three light sources, blue, white, and infrared, suit faces, bodies, cultural relics and industrial parts
Cons
- No warranty term is stated
- No scan volume or color capture is stated
- Needs a strong computer: i7-Gen7 CPU, Nvidia graphics card with 6GB VRAM and 16GB memory or higher

Creality Raptor 3D Scanner
A Creality 3D scanner with a 7-line blue laser and infrared mode, 0.02mm maximum accuracy, full-color capture and a 372g body.
Pros
- 0.02mm maximum accuracy with a 7-line blue laser and a 2.3-megapixel camera
- Full-color texture capture with 12 white LED supplemental lights
- Scans black and metal objects with low dependence on powder spraying
- Light 372g body with an all-metal lens barrel and lens base
Cons
- Wireless scanning needs future accessories; the listing does not include a wireless handle
- No warranty term is stated
- Blue light mode needs marker points assistance when needed
- Infrared mode needs a 150mm x 150mm x 150mm minimum volume, so small parts need blue light mode
Other machines to compare
Creality 3D ScannerCheck price on Amazon
Creality 3D Scanner Raptor X for 3D PrintingCheck price on Amazon
Creality 3D Scanner Raptor Pro for Automotive & EngineeringCheck price on Amazon
Creality 3D Scanner Raptor Pro and Scan Bridge WirelessCheck price on Amazon
Creality 3D Scanner Raptor Pro for 3D PrintingCheck price on Amazon
Ferret Pro Bundle-Ferret Pro Wireless Inspection Camera WillCheck price on Amazon
Side by side
| Spec | Creality Raptor | Creality Raptor X | Why it matters |
|---|---|---|---|
| HQ Score | 57 | 59 | Higher is stronger |
| Accuracy | 0.02mm maximum | 0.02mm maximum | Finer detail |
| Laser lines | 7 parallel lines | 34 cross lines plus 7 parallel lines | More lines |
| Scan speed | Up to 60fps blue light; up to 20fps infrared | Up to 60fps | Faster capture |
| Measurement rate | Not stated in the listing | 1,020,000 measurements/s cross laser; 3,580,000 measurements/s NIR | Quicker scans |
| Scan volume | 5mm x 5mm x 5mm minimum in blue light mode | Not stated in the listing | Small minimums |
| Color capture | Full-color texture; 12 white LED lights | Not stated in the listing | Color capture |
| Weight | 372g | 12.0 pounds in the spec table | Lighter weight |
| Dimensions | 215mm x 50mm x 74mm | Not stated in the listing | Handling and storage |
These numbers come straight from each maker’s listing and are rated, not measured by us (8 November 2026).
Creality Raptor vs Ferret Pro: Accuracy and Scan Modes
Both listings state a 0.02mm maximum accuracy. The Raptor pairs a 7-line blue laser with infrared structured light; the Raptor X adds 34 cross laser lines to the same 7 parallel lines, plus white light alongside blue and infrared. The Raptor states its blue light mode needs marker points assistance when needed; its infrared mode scans faces, bodies and cultural relics without markers. The Raptor X lists infrared scanning too, and names faces, bodies, cultural relics and industrial parts as scan targets.
Scan Speed and Detail
The Raptor states scan speeds up to 60fps in blue light mode and up to 20fps in infrared mode, with a 3D resolution of 0.02-2mm in blue light mode and 0.1-2mm in infrared mode. The Raptor X states a scan speed up to 60fps and lists 1,020,000 measurements/s for its 34 cross laser lines and 3,580,000 measurements/s for NIR structured light. It states no resolution figure.
Size, Weight and Handling
The Raptor states a 372g weight and 215mm x 50mm x 74mm dimensions, an optimized grip, and an all-metal lens barrel. The spec table gives the same body in inches as 1.9 inches x 2.9 inches x 8.4 inches. The Raptor X states no weight or dimensions in its bullets; its spec table lists 12.0 pounds, a figure that does not fit the wireless handle description, so the title and bullets win over the spec table on weight. The Raptor X wireless handle lets you move around the object with a phone as the screen; the Raptor lists wireless scanning only with future accessories.
Color Capture and Materials
The Raptor captures the full-color texture of object surfaces with 12 white LED supplemental lights, and it scans black and metal objects with low dependence on powder spraying. The Raptor X listing does not state color capture or powder spraying. Both listings name reverse engineering and automotive uses, plus faces, bodies and cultural relics as scan subjects.
Software and System Requirements
The Raptor runs Creality Scan software on Windows and macOS. Both listings state the same system requirements: Windows 10/11 (64 bit) with an i7-Gen7 CPU, an Nvidia graphics card with 6GB VRAM, and 16GB memory or higher; or macOS 11.7.7 and above with Apple M1/M2/M3 series processors and 16GB memory or higher. The Raptor outputs OBJ/STL/PLY files and takes 12V 2A input power.
Choose the Creality Raptor if
- You want full-color texture capture with 12 white LED lights.
- You want a lighter stated handheld at 372g and a scan range from 5mm to 2000mm.
- You scan black and metal objects with low dependence on powder spraying.
Choose the Creality Raptor X if
- You scan faces, bodies or industrial parts and want 34 cross laser lines and infrared scanning.
- You want a wireless handle with a phone as the screen.
- You want the stated measurement rates for its cross laser lines and NIR scanning.
Neither listing states a laser class or safety certification.
Project Match
Each project pairs with the pick whose listing states the matching use.
- Reverse engineering and automotive parts: both listings name these uses; the Raptor states 0.02mm maximum accuracy.
- Faces and bodies: the Raptor X lists body scanning with a wireless handle; the Raptor lists infrared mode for marker-free scanning of faces and bodies.
- Small parts: the Raptor, with a 5mm x 5mm x 5mm minimum volume in blue light mode.
- Cultural relics and industrial parts: the Raptor X lists both; the Raptor lists cultural relics in infrared mode.
FAQ: lasers and CNC
Which Creality scanner is better for scanning people?
Both listings name faces and bodies as scan subjects. The Raptor X pairs infrared scanning with a wireless handle, so you can move around the person while a phone shows the screen. The Raptor scans faces and bodies in infrared mode without marker points, and states a 150mm x 150mm x 150mm minimum volume in infrared mode; the Raptor X states no scan volume.
Do these scanners capture color?
The Raptor states full-color texture capture with 12 white LED supplemental lights. The Raptor X listing does not state color capture, so check the listing before planning color work.
What computer does the Creality Scan software need?
Windows 10/11 (64 bit) with an i7-Gen7 CPU, an Nvidia graphics card with 6GB VRAM, and 16GB memory or higher; or macOS 11.7.7 and above with Apple M1/M2/M3 series processors and 16GB memory or higher.
Can the Raptor scan black or metal objects?
Yes, the Raptor listing states it can directly scan many black and metal objects with low dependence on powder spraying. The Raptor X listing makes no powder-spraying claim, so its behavior on black and metal objects is not stated.
Where does the Ferret Pro fit in this comparison?
The listings supplied cover the Raptor side only, so the Ferret Pro has no stated specs here. The comparison above scores the Raptor and the Raptor X on what each listing states; check the Ferret Pro listing separately.
Related: best laser scanner for 3D printing, best 3D scanner for large objects, 3D scanner vs 3D printer and structured light vs laser 3D scanner.




