Countersink Bit Size: Screw Head Chart and Guide
A countersink bit size matches the screw head it seats, and this guide shows how the 82-degree angle, pilot size and depth stop work together.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Quick-Adjust Countersink Drill Bit Set9.6/10View on Amazon - 2
YQANDL 12Pcs HSS Adjustable Countersunk Drill Bits9.6/10View on Amazon - 3
EZARC Countersink Drill Bit Set for Hard Metal9.6/10View on Amazon
A cabinet door that sits proud of its frame, a deck board with a screw head catching every foot, a sign blank with a screw head breaking the surface: each one comes back to the same small choice, the size of the countersink. A countersink bit size is the size of the cutter that seats a screw head flush with the surface, and it follows the screw: the pilot drills the hole, the cutter opens the seat, and the head drops in level with the wood or metal around it. This guide shows how the size, the angle and the depth stop work together, with three sets that cover wood screws, hard metal and depth-controlled work.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick-Adjust Countersink Drill Bit Set
A 5-bit countersink set with TCT cutters, HSS M2 pilot bits and an auto-locking depth stop for wood.
Pros
- Tool-free depth adjustment with an auto-locking stop
- TCT cutters with HSS M2 pilot bits
- Ball bearing collar halts rotation on wood contact
- Five sizes for standard 82-degree countersunk screws
Cons
- No warranty term is stated
- Largest cutter is 1/2 in; wider seats need the EZARC set
- Wood materials only; the EZARC set covers hard metal
- No storage box; the EZARC and YQANDL sets include one

YQANDL 12Pcs HSS Adjustable Countersunk Drill Bits
A 12-piece countersink set for US wood screws #4 to #12 with a magnetic extension and replaceable bits.
Pros
- Covers US wood screws from #4 to #12
- Magnetic extension at 2.36 in included
- Five replaceable drill bits in the box
- 82-degree, 4-flute cutter for clean pilot holes
Cons
- Sized for US wood screws #4 to #12 only; larger screws need another set
- No depth stop collar; the Seuphubs set has an auto-locking stop
- No carbide cutter; the Seuphubs set uses TCT cutters
- Suits soft metal only among metals; stainless needs the EZARC set

EZARC Countersink Drill Bit Set for Hard Metal
A 5-bit AlTiN coated countersink set for hard metal, with 82-degree, 5-flute cutters from 1/4 in to 3/4 in.
Pros
- AlTiN coating for stainless and alloy steel
- Five-flute design for smooth cuts with minimal burrs
- Five cutter sizes from 1/4 in to 3/4 in
- Storage box included for jobsite storage
Cons
- No warranty term is stated
- May not give the same finish on softer metals
- No depth stop; the Seuphubs set has an auto-locking stop
- Speed capped at 800 RPM with no impact mode
How countersink bit size works
A countersink bit has two parts that each carry a size: the pilot bit that drills the screw hole and the cutter that opens the cone the head sits in. The Seuphubs set pairs each pilot with a cutter, from a 1/8 in pilot with a 3/8 in cutter to a 3/16 in pilot with a 1/2 in cutter. The EZARC set lists cutters only, from 1/4 in to 3/4 in, for seats on holes drilled before the countersink step. The YQANDL set marks its bits by screw size instead, from #4 to #12, so the bit matches the screw number on the box.
Start with the screw head, not the drill. A cutter wider than the head leaves a gap around it, and a cutter narrower than the head leaves the head standing proud. Check the head against the cutter size before drilling.
The 82-degree angle
All three sets in this guide use an 82-degree countersink angle, and the Seuphubs set states it matches standard 82-degree countersunk screws. The angle is the cone the cutter opens, and a matching angle lets the head sit flush. A bit with a different angle from the screw leaves only a ring of contact instead of a full seat.
The YQANDL set pairs its 82-degree angle with a 4-flute cutter, and the EZARC set with a 5-flute design that the maker ties to reduced vibration and even cutting forces, for smooth cuts with minimal burrs.
Depth stops and clean holes
Depth decides whether the head ends up flush or sunk. The Seuphubs set adjusts depth without tools and locks it with an auto-locking mechanism, and its aluminum alloy collar carries ball bearings that halt rotation on wood contact. The YQANDL set adjusts drilling depth and pairs drilling, countersinking and counterboring in one step. The EZARC set has no depth stop, so depth is set by hand.
The maker caps the EZARC set at 800 RPM, bars impact mode and says to use the bit vertically. No speed limit is given for the Seuphubs or YQANDL sets.
The gear for sizing countersink holes
Sizing the cutter to the screw head is the step that needs the gear below: the Seuphubs set covers wood screws with a depth stop, the YQANDL set covers screw sizes #4 to #12, and the EZARC set covers hard metal.
FAQ: lasers and CNC
What size countersink bit do I need for a #8 screw?
Use a set marked for the screw number. The YQANDL set covers US wood screws from #4 to #12, so it includes a bit for a #8 screw. Match the bit to the screw number on the box.
What does 82 degrees mean on a countersink bit?
It is the angle of the cone the cutter opens for the screw head. All three sets here use an 82-degree angle, which the Seuphubs set matches to standard 82-degree countersunk screws.
Can I use a countersink bit on metal?
It depends on the set. The EZARC set is made for stainless steel, alloy steel and other hard metals, and the YQANDL set covers soft metal and aluminum alloy board. The Seuphubs set covers wood materials only: MDF, particleboard, plywood, softwood and hardwood.
What speed should I run a countersink bit at?
Follow the figure given for the set you buy. The EZARC set caps speed at 800 RPM, bars impact mode and says to use the bit vertically. No speed limit is given for the Seuphubs or YQANDL sets.
Do countersink bit sets come with a depth stop?
Some do. The Seuphubs set has an auto-locking depth stop with tool-free adjustment. The YQANDL set adjusts drilling depth but no depth stop collar is stated for it. The EZARC set has no depth stop, so depth is set by hand.
Related: the CNC tooling hub, best countersink drill bit with depth stop and best countersink drill bit with depth stop under $30. For more, see types of drill bits and drill bit shank types.




