Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Button Maker Size Chart: Which Sizes to Make

A button maker size chart for fabric covered and pin buttons: die numbers, millimeter sizes, shapes and how to match dies, blanks and artwork.

Button Maker Size Chart: Which Sizes to Make
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Caydo Electric Button Maker Machine Multiple SizesCaydo Electric Button Maker Machine Multiple Sizes9.7/10View on Amazon
  2. 2Happizza Button Maker Machine Multiple SizesHappizza Button Maker Machine Multiple Sizes9.7/10View on Amazon
  3. 3MK.Bear Button Maker MachineMK.Bear Button Maker Machine9.7/10View on Amazon

A button maker size chart answers the question every new button seller asks before buying dies or blanks: which finished size should you make, and which die and blank set matches it? Button sizes are named by the die, and the two families name sizes differently: fabric covered buttons by die number and pin buttons by diameter in millimeters, so this chart separates the two families and lists the stated sizes for each.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Button maker size chart: the two size families

Button makers come in two families that do not share dies or blanks. Fabric covered button presses wrap fabric or leather over a button shell for sewing, upholstery and garments. Pin button makers press a printed design, a clear cover and a pin back into a badge. A size chart only helps when you read the section for your family, because a die for one family does not fit the press of the other.

Within each family, the size name describes the finished button. Fabric covered sizes are sold by die number, and pin button sizes are sold by diameter in millimeters. The sections below list the sizes stated for each family, then show how to match a die to the right blank set.

Fabric covered button sizes

Fabric covered button dies are numbered, and each number maps to a diameter in millimeters. YF STORE states its press kit makes No.20 at 12.7 mm, No.24 at 15.3 mm, No.28 at 18 mm, No.32 at 20.4 mm and No.36 at 23 mm. The maker describes these as sizes for small to medium projects such as tufted headboards, sofas, chairs, cushions, clothing and bridal garments.

Yalando states a wider die range for its hand press: dies numbered 16, 18, 20, 24, 28, 32 and 36, with a package of fabric covered buttons for each size. The maker also states the press accepts dies with M8 thread sizes. When a press lists die numbers without millimeter figures, match the blank package to the die number rather than guessing a diameter.

Die number Stated diameter Stated project range
No.20 12.7 mm Small to medium projects
No.24 15.3 mm Small to medium projects
No.28 18 mm Small to medium projects
No.32 20.4 mm Small to medium projects
No.36 23 mm Small to medium projects

Choose the die number by the finished look you want on the piece. The maker lists these sizes for small to medium projects, covering sewing and garment work through upholstery and home decor. The YF STORE kit includes 50 blank self-cover button sets, so you can compare finished sizes on scrap fabric before committing to a garment or a chair.

Pin button sizes

Pin button dies are named by the finished badge diameter in millimeters. ChiButtons states a round die at 58mm, also given as 2.25 inches, for its B400 model button maker machines. The package includes the die moulds in 3 pieces plus 100 sets of pin-back button components, so the blank size matches the die size in the same box.

Shape matters as much as diameter. ChiButtons also states a heart die at 53×57.5mm for the same B400 machines, again with 100 sets of pin-back components. A heart blank does not fit a round die, and a round blank does not fit a heart die, even when the widths look close. Match shape first, then diameter.

Shape Stated size Machine stated
Round 58mm (2.25 inches) B400 model button maker machines
Heart 53×57.5mm B400 model button maker machines

For selling, the round 58mm size gives room for a readable design, a logo or a short slogan. The heart shape suits seasonal and gift designs where the outline is part of the artwork. Our best button maker guide compares machines by the die sizes they accept, and the multi size button maker page covers presses that swap dies.

How to match dies, blanks and artwork

Start with the press, then the die, then the blank. A die must fit the press mount: Yalando states M8 thread dies for its press, and ChiButtons states B400 compatibility for its moulds. Next, the blank set must match the die number or diameter exactly. Fabric covered blanks are sold by die number, and pin button components are sold by diameter and shape.

Artwork for pin buttons is printed larger than the finished badge so the design wraps around the edge. Use the template for your exact die size rather than scaling a design made for a different diameter. For fabric covered buttons, cut the fabric circle so it wraps over the shell, and keep the fabric thin enough for the shell to close.

If you plan to sell several sizes, a press with interchangeable dies keeps one machine on the bench. Read how to work a button maker for the pressing steps, and how much button makers cost before you add a second machine.

Common size mistakes

  • Ordering blanks by diameter for a press that names dies by number, or the reverse.
  • Assuming a heart blank fits a round die because the widths look close.
  • Buying a die for a different press mount, such as a threaded die for a mould-style machine.
  • Printing artwork at the finished badge size, leaving no wrap for the edge.
  • Choosing the largest die for a garment button that needs to sit flat.

FAQ: lasers and CNC

What does No.28 mean on a fabric covered button die?

It is the die number. YF STORE states No.28 at 18 mm, between No.24 at 15.3 mm and No.32 at 20.4 mm.

Which pin button size is stated for the B400 machines?

ChiButtons states a round die at 58mm (2.25 inches) and a heart die at 53×57.5mm, both compatible with B400 model button maker machines.

Can I use fabric covered dies in a pin button maker?

No. Fabric covered presses wrap fabric over a shell, while pin button makers press a design, cover and pin back. Dies and blanks stay within their own family.

How do I know which blank set fits my die?

Match the exact size name. Fabric covered blanks match the die number, and pin button components match the diameter and shape, such as 58mm round or 53×57.5mm heart.

Do die packages include blanks?

The stated packages do. ChiButtons includes 100 sets of pin-back components with each die, and the YF STORE press kit includes 50 blank self-cover button sets.

Which size should a new seller start with?

Start with the size your press already accepts. For pin badges, the stated 58mm round die leaves room for readable designs. For sewing, the middle die numbers such as No.24 at 15.3 mm and No.28 at 18 mm sit between the smallest and largest sizes in the kit.

Related: the craft machines hub, best button maker and best button maker multiple size machine.

More buying guides

Craft Machines ·

Button Maker Troubleshooting: Common Fixes

Button maker troubleshooting starts with matching the die to the button, cutting the fabric to the stated size, and setting the press height before…