Best Soldering Hot Plate (2026): 5 Picks for PCB Rework
Five soldering hot plates from 210W to 850W, compared by heating area, temperature range, controls and cooling design for PCB rework and phone screen repair.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVevitts 850W Hot Plate9.6/10View on Amazon - 2
Best Digital ControlKosmeiner 350W Plate9.6/10View on Amazon - 3
Best Large PlateSoiiw 850W Hot Plate9.5/10View on Amazon - 4
Best Small BoardWEP 946D IV Hot Plate9.4/10View on Amazon
A phone screen that will not lift, a stubborn solder joint on a crowded board, a BGA chip that needs heat from below: these are the jobs that call for a steady heated plate instead of a hotter iron. The best soldering hot plate warms the whole work area at once, so solder flows where it should and the board stays at an even temperature while you work. This guide compares plates for PCB rework, phone screen repair and SMD work, and ranks them by heating area, power, temperature control and cooling design.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Vevitts 850W Hot Plate: A 200 x 200 mm plate, 850W, a 30 to 400°C range, a full heat insulation wrap and 3-side cooling holes. Check price on Amazon
- Best Digital Control Kosmeiner 350W Plate: A 100 x 100 mm plate with a digital display, a temperature sensor and multi-point heating for SMD work. Check price on Amazon
- Best Large Plate Soiiw 850W Hot Plate: A 200 x 200 mm plate at 850W with CPU temperature control and three-dimensional cooling holes. Check price on Amazon
- Best Small Board WEP 946D IV Hot Plate: A 100 x 50 mm plate with PID control, °C/°F conversion and 1-year USA technical support. Check price on Amazon
Machines on the list

Vevitts 110V 850W LED Digital Electric Hot Plate
An 850W hot plate with a 200 x 200 mm aluminum alloy plate, a full heat insulation wrap and 3-side cooling holes.
Pros
- 850W with a 200 x 200 mm aluminum alloy plate
- Full heat insulation wrap guards against accidental contact
- 3-side cooling holes with no fan for low-noise running
- Microcomputer CPU panel holds a 30 to 400°C range
Cons
- No warranty term is stated
- The 200 x 200 mm plate needs the most bench space here
- No °C/°F conversion is stated
- No timer or auto shutoff is stated

Soldering Hot Plate, PCB Preheater Rework Station
A 350W hot plate with a 100 x 100 mm aluminum alloy plate, a digital display, a temperature sensor and multi-point heating.
Pros
- Digital display with a temperature sensor and microcomputer control
- Multi-point heating warms several solder joints at once
- Heat-resistant edge keeps hands away from the hot surface
- Ventilation holes on both sides with a multi-angle cooling structure
Cons
- The 100 x 100 mm plate is smaller than the 200 x 200 mm picks
- 350W is lower power than the 850W picks
- No overall dimensions are stated
- The heating surface stays hot after switch-off

850W Soldering Hot Plate 200x200mm LED Electric
An 850W hot plate with a 200 x 200 mm aluminum plate, CPU temperature control and three-dimensional cooling holes.
Pros
- 850W with a 200 x 200 mm aluminum plate
- 30 to 400°C range with CPU constant temperature control
- Three-dimensional cooling hole design
- Multi-tube heating for even heat transfer
Cons
- No warranty term is stated
- The 200 x 200 mm plate needs the most bench space here
- No °C/°F conversion is stated
- No timer or auto shutoff is stated

350W Soldering Hot Plate,100×100mm LED
A 350W hot plate with a 100 x 100 mm aluminum plate and CPU constant temperature control.
Pros
- 350W with a 100 x 100 mm aluminum plate
- 30 to 400°C range with CPU constant temperature control
- Two-dimensional cooling hole design
- Compact 4.96 x 4.64 x 4.64 inch body for a small bench
Cons
- The 100 x 100 mm plate is smaller than the 200 x 200 mm picks
- 350W is lower power than the 850W picks
- No weight is stated in the listing
- No °C/°F conversion is stated

WEP 946D IV 100x50mm LED PCB Hot Plate 122°F~752°F
A 210W hot plate with a 100 x 50 mm aluminum plate, PID control, °C/°F conversion and 1-year USA technical support.
Pros
- PID temperature control with °C/°F conversion and a digital readout
- 122°F to 752°F range on a 100 x 50 mm plate
- Metallic guards protect the heating plate
- 1-year USA technical support with 24-hour assistance
Cons
- The 100 x 50 mm plate is the smallest heating area here
- 210W is the lowest power here
- Rated for 110 to 127V only, with a warning against 220V
- No cooling holes or ventilation design is stated
Other machines to compare
Soldering Hot PlateCheck price on Amazon
Soldering Hot Plate 200x200mm 850W LED Electric PreheatCheck price on Amazon
YIHUA 946D-IV Soldering Hot Plate Mini SizeCheck price on Amazon
853A Soldering Hot PlateCheck price on Amazon
SEQURE T55 Mini Soldering Hot Plate 25V 95W Preheating StationCheck price on Amazon
Specs compared
| Model | HQ Score | Power | Heating area | Temperature range | Control | Cooling | Warranty / support |
|---|---|---|---|---|---|---|---|
| Vevitts 850W Hot Plate | 9.6/10 | 850W | 200 x 200 mm | 30 to 400°C | Microcomputer CPU panel | 3-side cooling holes | Not stated |
| Kosmeiner 350W Plate | 9.6/10 | 350W | 100 x 100 mm | 30 to 400°C | Digital display, sensor | Ventilation both sides | Not stated |
| Soiiw 850W Hot Plate | 9.5/10 | 850W | 200 x 200 mm | 30 to 400°C | CPU control | 3D cooling holes | Not stated |
| Soiiw 350W Hot Plate | 9.5/10 | 350W | 100 x 100 mm | 30 to 400°C | CPU control | 2D cooling holes | Not stated |
| WEP 946D IV Hot Plate | 9.4/10 | 210W | 100 x 50 mm | 122°F to 752°F | PID, °C/°F | Metallic guards | 1-year USA technical support |
Specs are what each manufacturer publishes as its rating on the listing, collected 21 November 2026. Heating area is the plate size the maker states, and power is the electrical input the maker lists.
What the listings tell you, and what they leave out
This guide compares five soldering hot plate listings. None of the five states a warranty term; only the WEP 946D IV states a support term, 1-year USA technical support with 24-hour assistance. Four of the five state a 30 to 400°C temperature range, while the WEP states 122°F to 752°F with °C/°F conversion. All five state an aluminum or aluminum alloy heating plate.
Cooling design is where the listings differ most. Two Soiiw plates use multi-angle cooling holes, the Vevitts uses 3-side cooling holes with no fan, and the Kosmeiner uses ventilation holes on both sides. The WEP guards its plate with metallic guards instead.
Buying guide: choosing the best soldering hot plate
Heating area and power
Plate size decides which boards fit. The 100 x 100 mm plates suit phone boards and small PCB work, while the 200 x 200 mm plates give room for larger boards. The 850W plates heat the larger area, and the 350W and 210W plates serve the smaller plates. Match the plate to the largest board you repair.
Temperature range and control
Four picks hold a 30 to 400°C range with microcomputer or CPU control. The Kosmeiner adds a digital display and a temperature sensor that feeds back to the controller, so the controller adjusts heating power and holds the set temperature. The WEP takes a different path with PID control, a digital readout and °C/°F conversion across 122°F to 752°F. Pick the control style that matches how you work.
Cooling and bench safety
Every plate here runs hot enough to burn skin: the Kosmeiner warns against touching the surface during use and right after switch-off, and the WEP guards its plate with metallic guards. Cooling holes move heat away from the housing, and the Vevitts wraps its plate in heat insulation to guard against accidental contact. Give the plate a heat-proof surface to sit on, keep hands clear of the plate while it runs, and let it cool before moving it.
What a hot plate will not do
A hot plate preheats and reworks; it does not replace a soldering iron or a hot air station. The WEP listing says its plate works in conjunction with a hot air rework station or a soldering station, heating BGA chips from below while the station heats from above. Use the plate to loosen adhesive or preheat a board, then finish joints with an iron. If your work is mostly single joints on small boards, a soldering station alone may cover it.
A soldering hot plate holds a heated aluminum surface at rework temperatures, so treat it like a hot stove: never touch the plate during use or right after switch-off. Set the plate on a heat-proof surface with room for air around the cooling holes, work in a ventilated area, and wear eye protection when heating boards. Lead solder is not for food-contact items. The WEP plate is rated for 110 to 127V only, so never connect it to a 220V socket.
Project Match
Pair the project with the plate that states it:
- Phone screen separation and repair: all five picks state phone screen work, on plates from 100 x 50 mm to 200 x 200 mm.
- SMD rework and PCB desoldering: all five picks state SMD rework. The Kosmeiner heats several solder joints at once with multi-point heating.
- BGA chip removal: the WEP 946D IV states BGA chips and pairs with a hot air station for heat from above and below.
- Lab, analysis and teaching work: the Soiiw 850W, Soiiw 350W and Vevitts plates state laboratory, analysis room and teaching use.
- Warming liquids and general heating: the Kosmeiner states warming liquids as a general heating task. Not stated for the other picks.
How the scores add up
Each plate is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Vevitts 850W Hot Plate | 9.6 | 30 | 21 | 20 | 6 | 0 |
| Kosmeiner 350W Plate | 9.6 | 29 | 21 | 21 | 5 | 0 |
| Soiiw 850W Hot Plate | 9.5 | 29 | 20 | 20 | 4 | 0 |
| Soiiw 350W Hot Plate | 9.5 | 27 | 19 | 20 | 4 | 0 |
| WEP 946D IV Hot Plate | 9.4 | 24 | 20 | 19 | 5 | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.
FAQ: lasers and CNC
What temperature range should a soldering hot plate cover for PCB rework?
Four of the five picks in this guide state a 30 to 400°C range. The WEP 946D IV states 122°F to 752°F with °C/°F conversion. Pick a plate whose stated range covers the work you do.
What size heating area works for phone screen repair?
Every pick here states phone screen work, from the 100 x 50 mm WEP plate to the 200 x 200 mm Vevitts and Soiiw 850W plates. A 100 x 100 mm plate fits a phone and leaves a compact footprint on the bench. Match the plate to the largest board you repair.
Can a soldering hot plate replace a soldering iron?
No. The listings describe hot plates as preheat and rework tools: the WEP plate works in conjunction with a hot air rework station or a soldering station, heating from below while the station heats from above. Use the plate to preheat a board or loosen adhesive, and use an iron or a hot air station for the joints themselves.
Do these hot plates run on 220V power?
No. The Soiiw, Kosmeiner and Vevitts plates state 110V, and the WEP plate is rated for 110 to 127V with a warning against connecting it to a 220V socket. Use the voltage the maker states for the plate you buy.
How do I keep the bench safe around a hot plate?
Set the plate on a heat-proof surface with room for air around the cooling holes, and keep hands clear of the plate while it runs and right after switch-off. The Vevitts wraps its plate in heat insulation, and the WEP guards its plate with metallic guards. Work in a ventilated area and wear eye protection when heating boards.
Related: the electronics making hub, and our best soldering vise. Also see our best soldering magnifying glass. Also see our best desoldering braid. Also see our best soldering iron for pcb work. Also see our best soldering station for hobbyists. Also see our best soldering mat. Also see our soldering temperature..




